USB Device Detected Won't Start (code 10)
Nov 1, 2009
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
View 9 Replies
ADVERTISEMENT
Dec 9, 2012
My webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies
View Related
Oct 16, 2012
I am getting this error in device manager over and over and over, i have uninstalled the driver, and reinstalled it over and over, i keep getting the same error, my hauppauge colossus card was working perfectly then all of a sudden i get this error, i have used ccleaner to repair my registry all to no avail, I think i need to do something in the registry to fix this but have no idea exactly what. What do i do?
View 12 Replies
View Related
Jan 12, 2013
I have a Nikon Imaging scanner which my PC detects on connection. I have the correct driver which device manager installs with a code 10 error, the device cannot start.My PC is running Windows 7 64bit. I should point out that the scanner works correctly on my old PC running Windows XP, so there is no problem with the hardware. Anyone got any ideas why I might be getting the code 10 error on my new PC?
View 6 Replies
View Related
Oct 10, 2009
C-Media AC97 Audio Device. This device cannot start. (Code 10). Sound hardware on ASUS Mobo will not work after installing Windows 7. Latest drivers installed.
View 9 Replies
View Related
Jul 13, 2012
I have a compaq presario V3000 (mine is a V3015nr), When I bought it, it had windows xp and the ethernet and wireless connection worked well, then, I decided to upgrade it to win 7, but then, the drivers just crashed, I fixed this and everything was working well, but then, this error appeared and since that I'm unable to use wireless connection. I've searached a lot of drivers but all of them are for Windows xp, or windows 7 x64.. Mine is an Windows 7 ultimate x32
View 2 Replies
View Related
Dec 18, 2011
When I install the Drivers for SoundMax Integrated Digital Audio device, message appears This device cannot start (Code 10).
View 3 Replies
View Related
Jan 24, 2013
I am receiving a "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)None of my USB ports are working. I have tried to update driers, and modify the registry, but nothing seems to work. I don't have a way to get the information off my system, as none of the ports work, so I can't reset the machine to factory settings.
View 1 Replies
View Related
Nov 4, 2012
what will i do, there is no usb mass storage device driver detected in the device manager of my laptop.
View 3 Replies
View Related
Nov 19, 2012
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
View 9 Replies
View Related
Mar 9, 2011
whenever my computer restarts it gives me a message that says 'no boot sector on internal hard drive' then after a second a message pops up that says something a long the lines of 'press r1 to try reboot', etc ..everytime I hit f1 the computer will load up windows 7 fine though. But for some reason every single time I restart if gives me that 'no boot sector on internal hard drive' message
View 2 Replies
View Related
May 31, 2012
i installed driver hp and successfully install driver.HP ProBook 4530s Notebook PC*-* Download drivers and software - HP Business Support Center.But still in device manager not installed and when try for Bluetooth software. it show this message: no bluetooth device was detected. please make sure that your bluetooth device is plugged
View 1 Replies
View Related
Feb 25, 2011
So I put together a new system today with the following specs. Nothing is overclocked yet as I have yet to recieve the aftermarket CPU cooler.
New Stuff
CPU - Intel 2500k
MB - Asrock P67 Ext 4
Ram - GSkill Ripjaw 1600 Cas9
Vid - 2x MSI GTX570 in SLI
DVD - Samsung DVD Burner
[Code]...
I installed Win7 Pro no hastles and updated it. Installed all the latest drivers etc.Left the PC while it was downloading something and came back to find the Network connection had disappeared. Restarted several times between loading on the newest drivers from Realtek. Each time I checked the device manager I was unable to locate the network device options. Each time i tried to re-install the drivers it would give me a message about "The Realtek Network Controller was not found. IF Deep Sleep Mode is enabled Please Plug the Cable". After doing some reading about it I tried removing the RAM and BIOS battery but to no avail. So I tried updating the UEFI from ASROCK, the existing version was 1.3 and I updated to 1.5. After doing that I was no longer able to load into windows. I read further that if windows had been installed with disk setting set to IDE instead of AHCI it would not work. I could not recall If I had enabled AHCI or IDE so I tried every combination I could come up with but no luck. I then tried to re-install windows but after it installs and reboots the pc it goes to the completing installation screen. I have some mouse control for a short period and then it seems to freeze. However the 3 little progress dots on the screen continue to move eternally. I tried rolling the UEFI version back to 1.3 and ran the same process again and the same result.
It's been several hours since i wrote that part. Since then I have managed to get windows 7 to install. The network device was recognised and worked correctly. I immediately disabled sleep mode for the network device. I updated windows and installed all the required drivers again. Then all of a sudden the connection drops again and no network device can be found. I then go and get the PCIe Intel network card from my previous machine which I had bought due to a faulty onboard network device. I disabled the on board LAN device in the UEFI and then shut down. Installed the Intel Network Card and rebooted. Windows does not find it even when I try and add a device.
Only other thing I can think of is to try and install on a regular SATA drive and see if it's some kind of conflict with the SSD.
View 3 Replies
View Related
May 1, 2011
I could really do with some help. Just installed W7 64 but when I come to install drivers it cannot even detect my x-fi SB at all. Thus I cannot install the driver. No sound at all - I am at a loss. Does anyone have a solution? ps I have a ASUS ABN-SLI Nvidia chipset.
View 6 Replies
View Related
Nov 30, 2009
Every time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
any help?
View 3 Replies
View Related
Mar 29, 2011
I have just done a clean install from xp to windows 7 64 bit, everything is working fine except i have no audio, in the right hand of the task bar i am getting no audio output device is detected. If i look on device manager there is a fault on the multimedia audio controller The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.
View 1 Replies
View Related
Aug 19, 2011
I have an Intellimouse Explorer for Bluetooth that is not being detected by windows 7 with service pack1. I am unable to use the additional buttons or scroll wheel. The mouse is connected via microsoft dongle usb bluetooth receiver. The mouse does not connect to the system. The mouse is shows up as a HID-compliant mouse in Device Manager. installed Intellipoint 8.2. Intellipoint shows "No Microsoft USB Mouse Detected." I have uninstalling the Intellipoint software and reinstalled but not change
View 1 Replies
View Related
Jul 20, 2012
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
View 6 Replies
View Related
Jun 19, 2012
After installing Windows 7, I got the message near de loudspeaker icon "no output device detected" and a red cross.When I go to control panel, sounds, I do not see anything written when I click the play-back button.My PC is a Packard Bell Imedia.The sound worked well until I installed Avast antivirus and Windows updates.
View 7 Replies
View Related
Jan 6, 2013
I formatted my new Satellite l855, and installed windows 7 instead of windows 8. See what is going in device manager. Screenshot:
Network devices are not detected at all (ethernet, and wireless). My AMD HD Radeon 7670M isn't detected I don't know what's going with those unrecognized devices (yellow) it's a new laptop, i just formatted it and installed windows. What should i do?
Specs:
Toshiba Satellite L855-B511
Windows 7 Enterprise 64bit
Intel (R) i7
AMD Radeon HD 7670M
8GB DDR3
View 2 Replies
View Related
Jan 4, 2012
I have a Lenovo Thinkcentre M55 8813-a21 (LKRYA75). The sound works just fine in any Ubuntu installation i do, but I cannot get sound in either XP or Windows 7. I also couldn't get the networking drivers to work in XP so I am now on Windows 7. I have tried the driver download page on the Lenovo website, but none of them work. I don't know where to go from here.
View 3 Replies
View Related
Jan 10, 2013
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
View 1 Replies
View Related
Dec 6, 2011
I just bought a new acer travelmate 5760-2434G64M laptop with windows 7 ultimate x64.Everything is perfect except the control panel harware and device doesnot show fingerprint device. also the Bio-protection software cannot detect the device.Device manager shows driver for Secure biometrics devices (EgisTec ES603).It shows the driver is up to date and working properly.I have tried installing the driver form the DVD provided and also from Acer website.
View 3 Replies
View Related
Nov 4, 2012
I don't have any sound in my pc, there's a red cross on the volume symbol that says "No audio device installed", in device manager it doesnt appear any audio devices, I already downloaded the latest drivers from Asus but when I run it it says "No hardware detected", i already saw some threads in here with the same problem but couldnt find a solution. My motherboard is a Asus MAximus Formula and the audio is a Supreme FX II. I already tried to upgrade windows 7 with no results.
View 1 Replies
View Related
Nov 7, 2010
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies
View Related
Aug 23, 2012
So i've been playing games on my pc with a usb controller and it's been bugging but know when i plug it in a usb port i get usb unknown device does anyone know how to fix that?
View 9 Replies
View Related
Jul 28, 2012
Windows has stopped this device because it has reported problems. (Code 43). I have been sent around in circle trying to use the Microsoft fix it 'genius'. I am trying to connect my Smartphone via usb cable to computer. Battery charges but it either does not detect it at all or comes up with the above error message.
View 7 Replies
View Related
Sep 30, 2009
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies
View Related
Jan 2, 2010
1. First in the device manager, my "Microsoft Virtual Wifi Miniport Adapter is getting and error that says "Windows has shut down this device (code 43)"
2. The speed of the internet spikes between normal speed(10k-18k bytes/s to around 40 bytes a second
3. In the event view there is a warning that says: "NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The entry is not found. (0x800706E1)"
4. Another problem in the event viewer: "Name resolution for the name isatap.ktechsystems.ca timed out after none of the configured DNS servers responded."
5. Yet another problem, at this point my internet slows down to an unbearable speed: "This computer was not able to set up a secure session with a domain controller in domain KTECHSYSTEMS due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain."
If anyone has a suggestion on how i can fix this, it would be greatly appreciated.
ps.
-internet worked fine while hooked into the router through a cable
-im network retarded
-I apologize for my ignorance
View 9 Replies
View Related
Aug 30, 2012
Lately I've been getting a sound prompt telling me a device is not connecting. Everything I need seems to be so I can't figure it out.
It's just a bit of a nuisance but I'd like to find out. Is there a command prompt to ask the computer what isn't connecting?
View 2 Replies
View Related
May 31, 2011
The drivers for this device are not installed. (Code 28)
View 2 Replies
View Related