No Boot Device Detected?
Mar 9, 2011
whenever my computer restarts it gives me a message that says 'no boot sector on internal hard drive' then after a second a message pops up that says something a long the lines of 'press r1 to try reboot', etc ..everytime I hit f1 the computer will load up windows 7 fine though. But for some reason every single time I restart if gives me that 'no boot sector on internal hard drive' message
View 2 Replies
ADVERTISEMENT
Jan 10, 2013
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64
Motherboard: Gigabyte GA-Z77X-UD3H
Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
View 1 Replies
View Related
Nov 7, 2010
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies
View Related
Nov 4, 2012
what will i do, there is no usb mass storage device driver detected in the device manager of my laptop.
View 3 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Dec 1, 2012
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies
View Related
Oct 25, 2011
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
View 2 Replies
View Related
Nov 24, 2011
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies
View Related
Sep 5, 2011
When it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies
View Related
May 13, 2012
When left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
View 4 Replies
View Related
May 31, 2012
i installed driver hp and successfully install driver.HP ProBook 4530s Notebook PC*-* Download drivers and software - HP Business Support Center.But still in device manager not installed and when try for Bluetooth software. it show this message: no bluetooth device was detected. please make sure that your bluetooth device is plugged
View 1 Replies
View Related
Feb 25, 2011
So I put together a new system today with the following specs. Nothing is overclocked yet as I have yet to recieve the aftermarket CPU cooler.
New Stuff
CPU - Intel 2500k
MB - Asrock P67 Ext 4
Ram - GSkill Ripjaw 1600 Cas9
Vid - 2x MSI GTX570 in SLI
DVD - Samsung DVD Burner
[Code]...
I installed Win7 Pro no hastles and updated it. Installed all the latest drivers etc.Left the PC while it was downloading something and came back to find the Network connection had disappeared. Restarted several times between loading on the newest drivers from Realtek. Each time I checked the device manager I was unable to locate the network device options. Each time i tried to re-install the drivers it would give me a message about "The Realtek Network Controller was not found. IF Deep Sleep Mode is enabled Please Plug the Cable". After doing some reading about it I tried removing the RAM and BIOS battery but to no avail. So I tried updating the UEFI from ASROCK, the existing version was 1.3 and I updated to 1.5. After doing that I was no longer able to load into windows. I read further that if windows had been installed with disk setting set to IDE instead of AHCI it would not work. I could not recall If I had enabled AHCI or IDE so I tried every combination I could come up with but no luck. I then tried to re-install windows but after it installs and reboots the pc it goes to the completing installation screen. I have some mouse control for a short period and then it seems to freeze. However the 3 little progress dots on the screen continue to move eternally. I tried rolling the UEFI version back to 1.3 and ran the same process again and the same result.
It's been several hours since i wrote that part. Since then I have managed to get windows 7 to install. The network device was recognised and worked correctly. I immediately disabled sleep mode for the network device. I updated windows and installed all the required drivers again. Then all of a sudden the connection drops again and no network device can be found. I then go and get the PCIe Intel network card from my previous machine which I had bought due to a faulty onboard network device. I disabled the on board LAN device in the UEFI and then shut down. Installed the Intel Network Card and rebooted. Windows does not find it even when I try and add a device.
Only other thing I can think of is to try and install on a regular SATA drive and see if it's some kind of conflict with the SSD.
View 3 Replies
View Related
May 1, 2011
I could really do with some help. Just installed W7 64 but when I come to install drivers it cannot even detect my x-fi SB at all. Thus I cannot install the driver. No sound at all - I am at a loss. Does anyone have a solution? ps I have a ASUS ABN-SLI Nvidia chipset.
View 6 Replies
View Related
Nov 30, 2009
Every time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
any help?
View 3 Replies
View Related
Mar 29, 2011
I have just done a clean install from xp to windows 7 64 bit, everything is working fine except i have no audio, in the right hand of the task bar i am getting no audio output device is detected. If i look on device manager there is a fault on the multimedia audio controller The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.
View 1 Replies
View Related
Nov 1, 2009
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
View 9 Replies
View Related
Aug 19, 2011
I have an Intellimouse Explorer for Bluetooth that is not being detected by windows 7 with service pack1. I am unable to use the additional buttons or scroll wheel. The mouse is connected via microsoft dongle usb bluetooth receiver. The mouse does not connect to the system. The mouse is shows up as a HID-compliant mouse in Device Manager. installed Intellipoint 8.2. Intellipoint shows "No Microsoft USB Mouse Detected." I have uninstalling the Intellipoint software and reinstalled but not change
View 1 Replies
View Related
Jul 20, 2012
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
View 6 Replies
View Related
Jun 19, 2012
After installing Windows 7, I got the message near de loudspeaker icon "no output device detected" and a red cross.When I go to control panel, sounds, I do not see anything written when I click the play-back button.My PC is a Packard Bell Imedia.The sound worked well until I installed Avast antivirus and Windows updates.
View 7 Replies
View Related
Jan 6, 2013
I formatted my new Satellite l855, and installed windows 7 instead of windows 8. See what is going in device manager. Screenshot:
Network devices are not detected at all (ethernet, and wireless). My AMD HD Radeon 7670M isn't detected I don't know what's going with those unrecognized devices (yellow) it's a new laptop, i just formatted it and installed windows. What should i do?
Specs:
Toshiba Satellite L855-B511
Windows 7 Enterprise 64bit
Intel (R) i7
AMD Radeon HD 7670M
8GB DDR3
View 2 Replies
View Related
Jan 4, 2012
I have a Lenovo Thinkcentre M55 8813-a21 (LKRYA75). The sound works just fine in any Ubuntu installation i do, but I cannot get sound in either XP or Windows 7. I also couldn't get the networking drivers to work in XP so I am now on Windows 7. I have tried the driver download page on the Lenovo website, but none of them work. I don't know where to go from here.
View 3 Replies
View Related
Dec 6, 2011
I just bought a new acer travelmate 5760-2434G64M laptop with windows 7 ultimate x64.Everything is perfect except the control panel harware and device doesnot show fingerprint device. also the Bio-protection software cannot detect the device.Device manager shows driver for Secure biometrics devices (EgisTec ES603).It shows the driver is up to date and working properly.I have tried installing the driver form the DVD provided and also from Acer website.
View 3 Replies
View Related
Nov 4, 2012
I don't have any sound in my pc, there's a red cross on the volume symbol that says "No audio device installed", in device manager it doesnt appear any audio devices, I already downloaded the latest drivers from Asus but when I run it it says "No hardware detected", i already saw some threads in here with the same problem but couldnt find a solution. My motherboard is a Asus MAximus Formula and the audio is a Supreme FX II. I already tried to upgrade windows 7 with no results.
View 1 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Oct 11, 2012
I recently rebuilt my pc and when starting up, the CMOS Splash Screen is shown and when I try to load the OS in "start windows normally" it flashes a single frame of a BSOD and restarts or if I select Safe mode to use system restore,then the OS will try to load and Windows will search for the problem but not find it.I have already sent and received the Mobo, CPU, RAM, PSU and GPU for warranty testing (previously, it would not even POST) and apparently they had Windows 7 running fine once they updated the BIOS.Therefore,since everything else works fine, is my SSD dead or deadish? It is detected and I have selected it as the first preference to boot.
System Specs:
CPU: i7 2600k
Mobo: Gigabyte Z68 UD3XP
RAM: Corsair Vengeance 4x4Gb 1600 CL9
PSU: Corsair HX750
GPU: Asus DCII gtx 560 ti TOP
DVD: Lite on 22x
Case: HAF 922M
SSD: Intel 520s 128GB
HDD: WD Caviar Black 1TB
I will attempt to create a USB boot but would like to get the SSD going as it has my work programs. Also, has anyone had problems with the 520s? I chose that one because apparently it was more reliable.
View 8 Replies
View Related
Feb 4, 2012
I recently bought a vaio VPCX113KG off ebay. After a month of use the pc wont boot. it comes up as "operating system not found" but the laptop doesn't have an optical drive and I can find downloadable recovery media. What should I do? I think the hard disk is being detected in the bios.
View 2 Replies
View Related
Feb 28, 2012
a friend of mine asked me to look at his laptop the other day.It had stopped booting to windows.No OS detected, couldn't boot from HDD, still detected in the BIOS however. It's on a laptop which has 2 IDE connections so I switched the drive to the other and changed the boot order, same problem. The disk was essentially full and he was after a new one so I suggested now could be the time. Anyway the new HDD arrived today, got hold of a copy a Windows 7 and installed it, laptop now boots fine into the new copy of windows, everything is running OK but he needs data off the old HD. I thought the new OS would be able to access it but it isnt recognised in my computer. It is still recognised as the secondary drive in the BIOS and in windows drive management but cannot access it.Drive management can see it and says the device is working properly but it wont initialize, wont turn offline and any access attempt comes up as an I/O error.It has win7 and all his data on so formatting to just save the hard drive for storage isnt an option (just yet).
View 1 Replies
View Related
Jan 2, 2013
When I start my PC up. I get that error, with an American logo or something. Then it shuts down after 15 seconds
View 7 Replies
View Related
Feb 8, 2012
About a year ago I built my cousin a computer using some spare parts I had around using an original Creative Audigy as the sound card. Due to him trashing so that it had the BSOD, and me not quite liking the setup I had placed on it, I took the computer from him to wipe the OS and reinstall it. This time however the sound doesn't work and I've tried everything. I am not ignorant to computing and am 99% of the time self sufficient so this is an expert (mostly) reaching out to other experts as this problem has me stumped.I tried installing the drivers and reinstalling them, letting windows install it's default drivers to which it says it couldn't find any, installing a creative compatibility pack, removing Upper and Lower Filter entries in the registry (bit of a last ditch), standard windows troubleshooting in which it says "An unexpected error occurred. The trouble shooting wizard can't continue.", replacing the sound card with an Auzentec X-fi Prelude and installing and reinstalling its drivers, checking windows update for drivers, etc.
The two main errors I have are: "No audio output device detected" when hovering over the speaker icon with the red X, and "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" in the device manager with a yellow triangle flag over the device.Do note that this install is a striped install using RT Se7en Lite which took out things like Windows Media Player and the default drivers, etc. but since I realized that this could be the problem, I made a new partition and installed clean, unaltered Windows 7 32bit on it and the problem remains even on that install.
I've run chkdsk and sfc which got to about 13% and said it found corrupted files but couldn't fix them which might be the problem but the log didn't have anything I recognized as I haven't deciphered one of them before, so I am unsure and that could just be due to the stripping that RT Se7en Lite did (unless the master file list that sfc uses is generated from when you install windows, not just a default list).
View 11 Replies
View Related
Nov 4, 2009
I'm in a pickle with my machine and Windows 7 after this latest update. On startup I get an error from MMDevApi.dll saying that it might not run on Windows or... something else. This also occurs anytime a program tries to use the sound card ie. WoW, Yahoo IM, Live IM, SL, etc. I've updated my sound card drivers to the newest ones. I still get an error that says the device is detected when going to "Sound Devices" in the control panel.
Trying to adjust the sounds themselves leads me to the Windows Audio thing... which won't start even from the component list.
View 1 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 1 Replies
View Related