Every time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
whenever my computer restarts it gives me a message that says 'no boot sector on internal hard drive' then after a second a message pops up that says something a long the lines of 'press r1 to try reboot', etc ..everytime I hit f1 the computer will load up windows 7 fine though. But for some reason every single time I restart if gives me that 'no boot sector on internal hard drive' message
i installed driver hp and successfully install driver.HP ProBook 4530s Notebook PC*-* Download drivers and software - HP Business Support Center.But still in device manager not installed and when try for Bluetooth software. it show this message: no bluetooth device was detected. please make sure that your bluetooth device is plugged
So I put together a new system today with the following specs. Nothing is overclocked yet as I have yet to recieve the aftermarket CPU cooler.
New Stuff CPU - Intel 2500k MB - Asrock P67 Ext 4 Ram - GSkill Ripjaw 1600 Cas9 Vid - 2x MSI GTX570 in SLI DVD - Samsung DVD Burner
[Code]...
I installed Win7 Pro no hastles and updated it. Installed all the latest drivers etc.Left the PC while it was downloading something and came back to find the Network connection had disappeared. Restarted several times between loading on the newest drivers from Realtek. Each time I checked the device manager I was unable to locate the network device options. Each time i tried to re-install the drivers it would give me a message about "The Realtek Network Controller was not found. IF Deep Sleep Mode is enabled Please Plug the Cable". After doing some reading about it I tried removing the RAM and BIOS battery but to no avail. So I tried updating the UEFI from ASROCK, the existing version was 1.3 and I updated to 1.5. After doing that I was no longer able to load into windows. I read further that if windows had been installed with disk setting set to IDE instead of AHCI it would not work. I could not recall If I had enabled AHCI or IDE so I tried every combination I could come up with but no luck. I then tried to re-install windows but after it installs and reboots the pc it goes to the completing installation screen. I have some mouse control for a short period and then it seems to freeze. However the 3 little progress dots on the screen continue to move eternally. I tried rolling the UEFI version back to 1.3 and ran the same process again and the same result.
It's been several hours since i wrote that part. Since then I have managed to get windows 7 to install. The network device was recognised and worked correctly. I immediately disabled sleep mode for the network device. I updated windows and installed all the required drivers again. Then all of a sudden the connection drops again and no network device can be found. I then go and get the PCIe Intel network card from my previous machine which I had bought due to a faulty onboard network device. I disabled the on board LAN device in the UEFI and then shut down. Installed the Intel Network Card and rebooted. Windows does not find it even when I try and add a device.
Only other thing I can think of is to try and install on a regular SATA drive and see if it's some kind of conflict with the SSD.
I could really do with some help. Just installed W7 64 but when I come to install drivers it cannot even detect my x-fi SB at all. Thus I cannot install the driver. No sound at all - I am at a loss. Does anyone have a solution? ps I have a ASUS ABN-SLI Nvidia chipset.
I have just done a clean install from xp to windows 7 64 bit, everything is working fine except i have no audio, in the right hand of the task bar i am getting no audio output device is detected. If i look on device manager there is a fault on the multimedia audio controller The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver.
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
I have an Intellimouse Explorer for Bluetooth that is not being detected by windows 7 with service pack1. I am unable to use the additional buttons or scroll wheel. The mouse is connected via microsoft dongle usb bluetooth receiver. The mouse does not connect to the system. The mouse is shows up as a HID-compliant mouse in Device Manager. installed Intellipoint 8.2. Intellipoint shows "No Microsoft USB Mouse Detected." I have uninstalling the Intellipoint software and reinstalled but not change
After installing Windows 7, I got the message near de loudspeaker icon "no output device detected" and a red cross.When I go to control panel, sounds, I do not see anything written when I click the play-back button.My PC is a Packard Bell Imedia.The sound worked well until I installed Avast antivirus and Windows updates.
I formatted my new Satellite l855, and installed windows 7 instead of windows 8. See what is going in device manager. Screenshot:
Network devices are not detected at all (ethernet, and wireless). My AMD HD Radeon 7670M isn't detected I don't know what's going with those unrecognized devices (yellow) it's a new laptop, i just formatted it and installed windows. What should i do?
Specs: Toshiba Satellite L855-B511 Windows 7 Enterprise 64bit Intel (R) i7 AMD Radeon HD 7670M 8GB DDR3
I have a Lenovo Thinkcentre M55 8813-a21 (LKRYA75). The sound works just fine in any Ubuntu installation i do, but I cannot get sound in either XP or Windows 7. I also couldn't get the networking drivers to work in XP so I am now on Windows 7. I have tried the driver download page on the Lenovo website, but none of them work. I don't know where to go from here.
I originally had been running windows XP on my desktop. About a month ago, I bought a new hard drive and installed Windows 7 Ultimate x64 on it. For the last month, I have been able to dual boot between Windows 7 and XP just fine.
When I tried to boot up my machine this morning, my computer no longer boots and have the following message on screen:
"Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key"
I checked my BIOS and found that only my new hard drive and CD ROM are detected. I imagined that my old hard drive with Windows XP on it finally died. So I disconnected the old drive, but I am still getting the same issue. I have tried changing the boot order. I also tried booting with the Windows 7 setup CD and tried the repair tools. None of them recognizes the Windows 7 installed on my new hard drive. I started command prompt and was still able to see the contents of the new hard drive, with its WINDOWS directory and all my data/installed programs, so I believe the new hard drive still works. Is there anyway for me to fix this without having to reinstall Windows 7 again and lose all the data/programs I have? Does this have something to do with my XP not being bootable anymore?
OS: Windows 7 Ultimate x64 Motherboard: Gigabyte GA-Z77X-UD3H Harddrive: Seagate Barracuda 1TB 7200RPM 64MB SATA 6Gbps
I just bought a new acer travelmate 5760-2434G64M laptop with windows 7 ultimate x64.Everything is perfect except the control panel harware and device doesnot show fingerprint device. also the Bio-protection software cannot detect the device.Device manager shows driver for Secure biometrics devices (EgisTec ES603).It shows the driver is up to date and working properly.I have tried installing the driver form the DVD provided and also from Acer website.
I don't have any sound in my pc, there's a red cross on the volume symbol that says "No audio device installed", in device manager it doesnt appear any audio devices, I already downloaded the latest drivers from Asus but when I run it it says "No hardware detected", i already saw some threads in here with the same problem but couldnt find a solution. My motherboard is a Asus MAximus Formula and the audio is a Supreme FX II. I already tried to upgrade windows 7 with no results.
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
I have an emu 1820m soundcard installed in my computer. It seems to be functioning perfectly. I can play dvd'd, cd's, iTunes, etc and the sound plays through my speakers without a problem. I want to record some sounds from a dvd but i cant get anything to record. Recording device is set to Wave EMU DSP as the default device. Im using Audacity to record and have set the recording preference device to be Wave (E-MU _-DSP). When I hit record I get an error 'Error while opening sound device. Please check the input device settings and the project template'And I cant record anything.In the built in Windows sound recorder, when I hit record, I get this error 'An audio recording device cannot be found' Everything seems to be functioning perfectly, yet i just cant record anything.
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
Here is a copy of what pops up on my desktop over and over. I think it's a problem with Pogo and Java. There is more to the error message, A fatal error has been detected by the Java Runtime.
i was using win7 ultimate before and last day i tried to install a new win7 and in wich step that i had to choose a drive to install i sow this message "No drives were found. Click Load Driver to provide a mass storage driver for installation." but in the windows that i was using all of the drives was working.and i installed win vista and no messages like this i sow.
ram:4g video: ati radeon hd 5450 cpu:intel pentium 4 cpu 3.00 ghz 3.01ghz
About a year ago I built my cousin a computer using some spare parts I had around using an original Creative Audigy as the sound card. Due to him trashing so that it had the BSOD, and me not quite liking the setup I had placed on it, I took the computer from him to wipe the OS and reinstall it. This time however the sound doesn't work and I've tried everything. I am not ignorant to computing and am 99% of the time self sufficient so this is an expert (mostly) reaching out to other experts as this problem has me stumped.I tried installing the drivers and reinstalling them, letting windows install it's default drivers to which it says it couldn't find any, installing a creative compatibility pack, removing Upper and Lower Filter entries in the registry (bit of a last ditch), standard windows troubleshooting in which it says "An unexpected error occurred. The trouble shooting wizard can't continue.", replacing the sound card with an Auzentec X-fi Prelude and installing and reinstalling its drivers, checking windows update for drivers, etc.
The two main errors I have are: "No audio output device detected" when hovering over the speaker icon with the red X, and "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" in the device manager with a yellow triangle flag over the device.Do note that this install is a striped install using RT Se7en Lite which took out things like Windows Media Player and the default drivers, etc. but since I realized that this could be the problem, I made a new partition and installed clean, unaltered Windows 7 32bit on it and the problem remains even on that install.
I've run chkdsk and sfc which got to about 13% and said it found corrupted files but couldn't fix them which might be the problem but the log didn't have anything I recognized as I haven't deciphered one of them before, so I am unsure and that could just be due to the stripping that RT Se7en Lite did (unless the master file list that sfc uses is generated from when you install windows, not just a default list).
I'm in a pickle with my machine and Windows 7 after this latest update. On startup I get an error from MMDevApi.dll saying that it might not run on Windows or... something else. This also occurs anytime a program tries to use the sound card ie. WoW, Yahoo IM, Live IM, SL, etc. I've updated my sound card drivers to the newest ones. I still get an error that says the device is detected when going to "Sound Devices" in the control panel.
Trying to adjust the sounds themselves leads me to the Windows Audio thing... which won't start even from the component list.
I have problems when I play games, I get some BSOD about half an hour after I start playing. it says local ID 1033
I tought it might be a memory problem so I run the memoty test, it says it found a hardware problem and that I should contact the manufacturer. Then windows boot perfectly and no error message appear... I dont know what to do next.
I did a fresh Windows 7 64 bit installation and everything was going fine (besides the BSOD problems about the graphics card which I fixed by renaming nvlddmkm.sys which was the cause of the BSOD) until I tried installing the Ethernet drivers.
Specs: Gigabyte GA-MA69G-S3H Motherboard AMD Athlon 64 6000+ CPU 4GB 800 DDR2 Memory 585 Watt Power supply XFX 8800 GTS GPU 2 Seagate Hard drives : 250 GB & 160GB
Windows doesn't even detect the adapter even though its onboard. I've tried installing the drivers from the original dvd (and in compatible and as administrator) with no luck. I also tried downloading the latest lan drivers from [URL] but it still didn't work. I got a deep sleep error or something. (Which I couldn't resolve cause there's nothing in network connections, not even the 1394 connection which is also turned on in the bios)
No it does not show in device manager under Network adapters. Actually there isn't even a network adapter subcategory unless I click show hidden devices(which has multiple devices then but no network controller). The only driver with a question mark is the graphics card driver which I will try to install after I get the Ethernet adapter working. Microsoft did say its 64 bit compatible [URL] so I don't know what to do. I did check the settings in the bios to see if everything with network was enabled and whatnot.. I also tried resetting everything in the bios to default settings with no luck.
Out of desperation tried adding the device manually through device manager (action>add Legacy hardware>manually>network adapters>have disk..) I tried this with the latest drivers I got from gigabytes website but it didn't even show a device, so I tried the original drivers from the mobo dvd which gave 3 devices.. I tried them all.. each time reinstalling the latest drivers and whatnot to no avail. I'm Thinking of trying to use the windows 64 bit repair disk seeing as it might be software related seeing as it doesn't even show the firewire adapter.
I started having some severe system hang - checked event viewer and found "The driver detected a controller error on DeviceHarddisk0DR0" many times over. I have an EVGA 680i SLI (122-CK-NF68) - updated chipset/storage drivers - no fix. I opted to reload Windows. Previously I had two stand-alone HDDs - I setup a Raid 0 and cleared the MBR before starting the new install."Expanding Windows Files" seemed to take much longer than usual and during the final phase of setup I got "Windows could not configure one or more system components". I repartitioned and formatted and tried again - this time after the initial reboot just as its attempting to load Windows to finish installation (before the point I got the above error) there was an error (too fast to see) and the system reboot itself and continued this cycle till I shut it off. I've had this machine for about 4 years and reload Windows about every 6-8 months. The above two errors back to back seemed like more than coincidence.
Recently built a new studio (recording) rig...with the following parts:
CPU: Intel Core�i7 3770K Motherboard: ASUS P8Z77-V Graphics: PNY Quadro FX380 Network: Intel 82579 Gigabit Ethernet Audio: RME HDSPe Multiface II Memory: 16 GB Kingston HyperX Genesis DDR3-1600MHz w/ Intel XMP Optical Drive: Asus DRW-24B1ST 24x DVD-RW Drive HD1: Crucial M4 2.5in SATA III Solid State Drive, 128GB HD2: Seagate 500GB Barracuda 7200.12 HD3: Seagate 1TB Barracuda 7200.12 Case: Coolermaster CM 690 II Advanced PSU: Corsair HX 650 Professional Series OS: Windows 7 Professional 64 Bit SP1 Yesterday (and then again today) I used the DVD drive (basically for it's firs real usage) to rip a few CDs. I ripped a couple with no issues...but then suddenly - after about the third or 4th rip - I would merely reach down, press the Eject button on the drive and the machine would instantly shutdown. No blue screen, no message, no nothing.
At first I thought it was static or something - just reaching over to the machine and pressing the button Event viewer says nothing. However I did see one obscure message back on Oct 7th that stated this:"The driver detected a controller error on DeviceIdeIdePort0"Gotta think that's this DVD drive port. But no other messages at all since then.Anyone got ANY ideas as to what the heck is going on? It's a SATA drive - maybe a cable? Maybe the drive controller is actually FUBAR-ed? Maybe the power supply? Motherboard (I hope not)
I recently did a clean install of Windows 7 x64, and my I cannot install from my DVD drive. When i attempt to open the drive in command prompt it gives me an I/O device error message. I can open media disks with no problem, and the drive appears in both device manager, and windows explorer. I've attempted to find the firmware for the driver (mat****a UJ-840s) but I have not been successful. One more note I went from a 32 bit XP to the 64 bit windows 7
I installed Ubuntu side by side to my win 7. On the install it would only install to an external drive I have. After the install completed an I restarted my computer and I got an error message=" error: no such devive: 868152e-2012-469b-b469-ebc2c953dfb4.grub resue>"I restarted my computer a few times and kept getting the same message.I decided to restore my computer back to factory defaults. After doing this I restarted my computer but kept getting the same message.
I have a laser projector, and i control it with my windows seven notebook by usb. Problem is, sometimes by a static shock of other devices or by other causes i do not know of, the notebook suddenly refuses to work with the usb drive anymore and the projector freezes.
but here is the part i want to solve. after replugging the usb drive windows says that the usb device is not regonised.... after plugging out and waiting 2 minutes and then replug makes it work again...if i do it sooner then usally it still shits about the device not being regonised.