"The Driver Detected A Controller Error On DeviceHarddisk0DR0"
May 24, 2011
I started having some severe system hang - checked event viewer and found "The driver detected a controller error on DeviceHarddisk0DR0" many times over. I have an EVGA 680i SLI (122-CK-NF68) - updated chipset/storage drivers - no fix. I opted to reload Windows. Previously I had two stand-alone HDDs - I setup a Raid 0 and cleared the MBR before starting the new install."Expanding Windows Files" seemed to take much longer than usual and during the final phase of setup I got "Windows could not configure one or more system components". I repartitioned and formatted and tried again - this time after the initial reboot just as its attempting to load Windows to finish installation (before the point I got the above error) there was an error (too fast to see) and the system reboot itself and continued this cycle till I shut it off. I've had this machine for about 4 years and reload Windows about every 6-8 months. The above two errors back to back seemed like more than coincidence.
View 2 Replies
ADVERTISEMENT
Jul 20, 2012
Recently I reformatted my HD and clean install win 7 ultimate 32 bit on my computer, bcuz of some problems when booting up, took like forever to boot or 2 to 3 restarts..At first BIOS cant detect my HD so I taught its a hardware issue I did like changing the sata cable also took it to a technician TWICE! maybe the sata port was broken they check all the connection, the last one did fix it but im still having difficulty booting up..He said one last option reformat, so i did reformat it successfully from win xp, now it boots up just fine its running good no problem for like a week yeah just 1 week!. Now my pc has new problem or is it?? Whenever I used it 2 to 3 hours my pc hangs so much even just opening event viewer would take me 5 to 10 mins and 2 errors always flood event viewer the first time i saw it disk error reach 5231 and nvistor32 reach 5366 errors, right now as I am writing this, Disk error reach a waaping 23,145 total. I think this is a serious problem that needs some fixing.
View 6 Replies
View Related
Oct 24, 2012
Recently built a new studio (recording) rig...with the following parts:
CPU: Intel Core�i7 3770K Motherboard: ASUS P8Z77-V Graphics: PNY Quadro FX380 Network: Intel 82579 Gigabit Ethernet Audio: RME HDSPe Multiface II Memory: 16 GB Kingston HyperX Genesis DDR3-1600MHz w/ Intel XMP Optical Drive: Asus DRW-24B1ST 24x DVD-RW Drive HD1: Crucial M4 2.5in SATA III Solid State Drive, 128GB HD2: Seagate 500GB Barracuda 7200.12 HD3: Seagate 1TB Barracuda 7200.12 Case: Coolermaster CM 690 II Advanced PSU: Corsair HX 650 Professional Series OS: Windows 7 Professional 64 Bit SP1 Yesterday (and then again today) I used the DVD drive (basically for it's firs real usage) to rip a few CDs. I ripped a couple with no issues...but then suddenly - after about the third or 4th rip - I would merely reach down, press the Eject button on the drive and the machine would instantly shutdown. No blue screen, no message, no nothing.
At first I thought it was static or something - just reaching over to the machine and pressing the button Event viewer says nothing. However I did see one obscure message back on Oct 7th that stated this:"The driver detected a controller error on DeviceIdeIdePort0"Gotta think that's this DVD drive port. But no other messages at all since then.Anyone got ANY ideas as to what the heck is going on? It's a SATA drive - maybe a cable? Maybe the drive controller is actually FUBAR-ed? Maybe the power supply? Motherboard (I hope not)
View 2 Replies
View Related
Aug 4, 2010
I did a fresh Windows 7 64 bit installation and everything was going fine (besides the BSOD problems about the graphics card which I fixed by renaming nvlddmkm.sys which was the cause of the BSOD) until I tried installing the Ethernet drivers.
Specs:
Gigabyte GA-MA69G-S3H Motherboard
AMD Athlon 64 6000+ CPU
4GB 800 DDR2 Memory
585 Watt Power supply
XFX 8800 GTS GPU
2 Seagate Hard drives : 250 GB & 160GB
Windows doesn't even detect the adapter even though its onboard. I've tried installing the drivers from the original dvd (and in compatible and as administrator) with no luck. I also tried downloading the latest lan drivers from [URL] but it still didn't work. I got a deep sleep error or something. (Which I couldn't resolve cause there's nothing in network connections, not even the 1394 connection which is also turned on in the bios)
No it does not show in device manager under Network adapters. Actually there isn't even a network adapter subcategory unless I click show hidden devices(which has multiple devices then but no network controller). The only driver with a question mark is the graphics card driver which I will try to install after I get the Ethernet adapter working. Microsoft did say its 64 bit compatible [URL] so I don't know what to do. I did check the settings in the bios to see if everything with network was enabled and whatnot.. I also tried resetting everything in the bios to default settings with no luck.
Out of desperation tried adding the device manually through device manager (action>add Legacy hardware>manually>network adapters>have disk..) I tried this with the latest drivers I got from gigabytes website but it didn't even show a device, so I tried the original drivers from the mobo dvd which gave 3 devices.. I tried them all.. each time reinstalling the latest drivers and whatnot to no avail. I'm Thinking of trying to use the windows 64 bit repair disk seeing as it might be software related seeing as it doesn't even show the firewire adapter.
View 14 Replies
View Related
Jan 15, 2011
I mave managed to get USB Storage Devices to work, but things like usb printers are not working. The problems will be described in the following images. The Devices give the error 28 (no driver). Here are some pics- [URL]. I cant find any such driver. No system restore
View 6 Replies
View Related
May 4, 2011
i started my pc 2day 2 find thay some of my usb devices hav stopped workin and an error msg in device manager. the error is on the standard enhanced PCI to USB HOst controller. my mobo is a asus m4n68t m le v2 Windows 7 x64
EDIT: I uninstalled the driver n rebooted. windows reinstalled the driver n all seems ok so far
View 2 Replies
View Related
Jun 13, 2012
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies
View Related
Apr 6, 2012
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
View 4 Replies
View Related
Nov 30, 2009
Every time im exploring my fone's memory card,or any other kind of storage like usb memory sticks, the window explorer closes down, and i have to open it agin,locate the folder i was on,but then it will happen again.
If i check Event viewer (System bit)it generates the following event: An error was detected on device DeviceHarddisk2DR2 during a paging operation.
Is my hard drive working ok?+ i noticed that my computer works slow,when im on windows explorer,going to my music,etc...
any help?
View 3 Replies
View Related
Oct 19, 2011
Here is a copy of what pops up on my desktop over and over. I think it's a problem with Pogo and Java. There is more to the error message, A fatal error has been detected by the Java Runtime.
View 2 Replies
View Related
Jan 21, 2013
i was using win7 ultimate before and last day i tried to install a new win7 and in wich step that i had to choose a drive to install i sow this message "No drives were found. Click Load Driver to provide a mass storage driver for installation." but in the windows that i was using all of the drives was working.and i installed win vista and no messages like this i sow.
ram:4g
video: ati radeon hd 5450
cpu:intel pentium 4 cpu 3.00 ghz 3.01ghz
View 3 Replies
View Related
Sep 24, 2009
I have problems when I play games, I get some BSOD about half an hour after I start playing. it says local ID 1033
I tought it might be a memory problem so I run the memoty test, it says it found a hardware problem and that I should contact the manufacturer. Then windows boot perfectly and no error message appear... I dont know what to do next.
View 3 Replies
View Related
Feb 8, 2012
Dvd driver not detected?
View 4 Replies
View Related
Mar 20, 2012
I am not sure if I can still fix this but I am trying not to lost hope here. This started when I upgrade my professional XP to windows7 Ultimate. I was able to use it for at least 3 months with no issue but then my computer crashed. I decided not to use windows7 anymore and then installed back my XP professional but even I have tried to uninstall and reinstall the XP os, my computer tends to use the generic driver of the video card. It will not detect now my monitor driver as well. I still have all th cd drivers but my computer always tells me it can't locate the driver. Should I replace or buy a new video card or is it my monitor driver that is damaged?
View 1 Replies
View Related
Dec 14, 2011
i upgraded my computer from xp pro and i lost my internet driver
View 1 Replies
View Related
Nov 23, 2012
my os install but hdd not boot may be drive disk controller or driver r missing how to solve problem toshiba laptop
View 1 Replies
View Related
Dec 12, 2011
Windows 7 Home Premium 64bit Rebuilt my PC with a Gigabyte Z68XP-UD4 board and i5 2500k CPU. Everything installed and ran perfectly. Zero hardware or software issues. I've been running two GTX 465's in SLI configuration. They ran fine right after I first installed their drivers. SLI worked perfectly. Everything was going well. I was benchmarking Crysis, playing Skyrim, all that good stuff. Then, I booted my PC this morning, and Windows was automatically updating drivers. I checked which ones they were, and among them were PCI bridge, PCI to PCI connector, etc. Since the update, I no longer have SLI. In fact, my second GTX 465 doesn't even show up in the Device Manager. In the Nvidia control panel, there is no option for SLI, it just show "Set PhysX Configuration."
View 1 Replies
View Related
Mar 30, 2012
When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies
View Related
Jan 15, 2013
It's HP M9652Uk with a none original drive. Silicon Power 2.5" SSD 60gb What drivers do I need and how do I instal them? Drive detected in bios but not during setup, also in ACHi mode
View 5 Replies
View Related
Nov 22, 2011
Just curious, Why ?? A video driver is software. I get a yellow exclimation point in the Windows Performace tab saying I need to run WEI again.
View 5 Replies
View Related
Nov 20, 2012
I have tried the driver from the official Broadcom website but it doesn't install, just says that bluetooth cant be detected. Looking for link somewhere for 64 bit version but where I can find the correct driver?
View 1 Replies
View Related
Jun 12, 2011
I bought USRobotics. wireless USB adapter but have problem with driver. I installed driver software but still not detect from system.
View 2 Replies
View Related
Aug 5, 2009
I am running Windows 7 RC on an iMac 24 inch through boot camp. I've been running for months with no issues.
Recently, I've been having almost daily spontaneous reboots. With the event log saying "The driver detected a controller error on deviceharddiskdr1." It's event 11, Disk
There are 3-4 errors within a minute of each other, and then a reboot. I can post the event data or binary data if necssary. I'm clueless at what any of this means. I have multiple HDs and paritions hooked up, if that helps.
View 0 Replies
View Related
Oct 23, 2009
I bought the student version. I downloaded it fine and every time i try to install the program i get this error.
Windows cannot be installed to this disk. Windows needs the driver for device [Standard IDE/ESDI Hard Disk Controller]. Click 'Load Driver' and load the required device driver.
Is there any way i can fix this? My CD drives stopped working a while back, i have a custom built computer. I tried to download the driver online installed and i still get this error. Can someone please help me.
View 5 Replies
View Related
May 21, 2012
my laptop is hp pavilion g6 notebook pc >> my problem is with the ethernet controller driver and the network contoller driver >> after i had install a windows 64 bit i couldn't find these drivers.
View 8 Replies
View Related
Jul 23, 2011
my controller was working fine until 1 day when i plugged it in the windows didnt recognise it and a message appeared saying usb device not recognised and the error was code 43.i have lost 2 of my joysticks just like this.
View 9 Replies
View Related
Apr 9, 2012
I decided to run Asus live and have it update my computer. Around the 12th update my computer couldn't connect to the Internet saying my cable may be broken and try a new one. I ran troubleshooter and have a Ethernet Controller doesn't have a driver.
View 6 Replies
View Related
May 24, 2012
My Sony VGN-NW320f using windows 7 Pro Ricoh memory stick controller keep giving me an error every time I try to install a new USB device like, USB INTERNET hub, black playbook, any usb phone cant connect to desktop software. In the divice manager it says driver cannot verify the Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52).
View 2 Replies
View Related
Nov 14, 2009
A few days ago I did a clean install of Windows 7. Now I have a problem. The computer is a wireless 'client'. It has a Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC (NDIS 6.20).
When I bring up Device Manager and expand 'Network adapters' I see "Realtek PCIe GBE Family Controller".
When I expand 'Other devices' I see "! Network Controller" (Note the exclamation point.) Double click on that and I see "The driver for this device is not installed. (Code 28). When I click on Update driver I get a message Can't find a driver. I have tried many times with different source folders and files and nowhere is a driver found.
I have gone to MSIs driver web page and downloaded the Realtek PCI-E Ethernet Driver for Windows 7 32/64 bit "realtek_pcielan_7_nb.zip", extracted the files and still no joy. (M/B is MSI G41M with Intel E7400)
There is a wireless icon in the tray. I click 'Open network and sharing center". No matter what I choose Windows 7 ends up telling me to plug in an Ethernet cable. No, this is a client not the server. I have verified that the NIC can connect to the computer with the Ethernet cable by using the old XP hard disk.
Any suggestions?
View 2 Replies
View Related
Sep 16, 2012
want network controller driver and pci device driver.i have hp,amd laptop and use windows 7 32 bit?
View 1 Replies
View Related
Aug 9, 2012
This error started right after installed 64 bit.I tried to install sound drivers but problem is still there , it cant detect my speakers i plugged in.
My Motherboard : ASUS P5KPL-AM SE
View 1 Replies
View Related
