SATA Driver Detected In Bios But Not In Windows 7

Mar 30, 2012

When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?

View 1 Replies


ADVERTISEMENT

SATA HDD Recognized In BIOS But Not By Windows 7 Pro

Jul 19, 2012

I installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.

Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.

View 2 Replies View Related

ESATA To SATA Cable - HDD Not Detected

Jan 15, 2013

I'm trying to connect an internal, powered SATA HDD to the eSATA port on the back of my motherboard.To do this, I bought an eSATA to SATA cable.Unfortunately, no matter what I do, the drive is never detected, not even by the BIOS.So, I bought another cable. Same problem.Finally, I tried moving the drive and the cable to another computer. The HDD is not detected there either.So, either I am making the same mistake on both computers, or both cables are faulty..

View 6 Replies View Related

SATA Hard Drive Not Detected

Nov 26, 2010

I am trying to install windows 7 for a friend but the hard drive isn't detected within windows setup or within the bios. I have tried installing SATA drivers to try and get windows to recognise the hard drive but to no avail. Is there anything else I can try before assuming that the hard drive may be faulty?

View 2 Replies View Related

BIOS Menu Detected USB Device But Cannot Boot To Install Windows 7

Nov 7, 2010

So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.

View 6 Replies View Related

Switching BIOS SATA RAID/AHCI Setting Causes BSOD At Windows Start

Mar 30, 2012

I just changed my disk setup from:

1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1

TO:

1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]

Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.


These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.

What am I missing? Why can't I set it to AHCI mode without BSODs?

View 8 Replies View Related

Bios Not Detecting Any Sata Drives?

Aug 7, 2012

My pc had suddenly decided to not recognising any of my Sata drives. Win 7 32 bit, 4 gig ram, asus psn d motherboard,ati sapphire 1g pci card, 1 250g western digital Sata drive 1 x 1tb seagate hdd. Sata DVD drive

Yesterday my pc froze up while surfing the web, so reset it and that where the problems started

It only recognised one of the hdd then wouldn't boot got a bsod uncountable boot volume. So opened up the case to check if the cables where loose, nope, so decided to run a repair via the recovery console. Didnt detect my o/s at all ask me to install the correct drivers grrrrr. So stripped the pc down swapped the Sata cables to see if that was the problem, no joy at all would only find one Sata drive and DVD drive. Then it wouldnt recognise any of them, so swapped out the Sata DVD drive for an IDE drive. The booted up nothing bar the DVD drive. Have now come to a cross roads don't know what else's to try. Managed to boot via a USB drive with Linux and everything system wise, pcu, gpu etc works, but still no Sata drives.

Done some digging online and some ideas are not a big enough psu, faulty Sata cables, but swapped in an IDE hdd and nothing again.

View 8 Replies View Related

USB SATA Is Not Recognized After BIOS Update

Dec 20, 2012

it was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?

View 2 Replies View Related

USB SATA Not Recognized After Bios Update

Jun 5, 2012

It was working before the BIOS Update My Board is Intel DG31PR Updated to the (http://downloadcenter.intel.com/Deta...=2839&lang=eng) and i dont remember the old BIOS version

View 2 Replies View Related

SSD Hard Drive - Use SATA As IDE Or AHCI In BIOS

Sep 28, 2012

I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.

But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.

I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.

View 4 Replies View Related

Couldn't Boot From HDD / Still Detected In BIOS However

Feb 28, 2012

a friend of mine asked me to look at his laptop the other day.It had stopped booting to windows.No OS detected, couldn't boot from HDD, still detected in the BIOS however. It's on a laptop which has 2 IDE connections so I switched the drive to the other and changed the boot order, same problem. The disk was essentially full and he was after a new one so I suggested now could be the time. Anyway the new HDD arrived today, got hold of a copy a Windows 7 and installed it, laptop now boots fine into the new copy of windows, everything is running OK but he needs data off the old HD. I thought the new OS would be able to access it but it isnt recognised in my computer. It is still recognised as the secondary drive in the BIOS and in windows drive management but cannot access it.Drive management can see it and says the device is working properly but it wont initialize, wont turn offline and any access attempt comes up as an I/O error.It has win7 and all his data on so formatting to just save the hard drive for storage isnt an option (just yet).

View 1 Replies View Related

Hard Drive Not Being Detected In BIOS

Apr 30, 2012

My hard drive, a WD Scorpio 200GB, is not being detected in bios. AHCI mode is enabled. When I go into the Advanced BIOS Features, all the master and slave configs are none; however, my SSD is recognized as I am on my computer right now using it. I tried every SATA Port, EVEN THE SATA PORT MY SSD IS INSTALLED ON, and it doesn't work; I tried 2 different cables and still no recognition; I tried 4 different hard drives and still no recognition, so it is not a problem with my motherboard, hard drives, or cables. What should I do? I have been trying to figure this out for 4 hours.

View 7 Replies View Related

PSU Died, New PSU, Bios Won't Recognize SATA Devices, Now Won't Turn On

Oct 18, 2012

Synopsis: PSU died, replaced PSU with different model, system boots to bios successfully but does not recognize any devices in SATA ports, nor do those devices appear to be getting power. Now can't even get to BIOS, entire PC flicks on and off repeatedly as soon as I turn the PSU on regardless of whether I hit the power button on the front of the computer.

System Specifications

Original PSU that died: SeaSonic M12II 750 SS-750AM 750w PSU
CPU: Intel Core i5-3570K Ivy Bridge 3.4GHz
GPUs: ASUS 670 non-top version, SLI (2x)
MOBO: ASRock Z77 extreme 6
RAM: Mushkin Enhanced Blackline 8GB (2 x 4GB) SDRAM DDR3 2133
Optical drive: Sony AD-7280S-0B 24x SATA Internal DVD+/-RW Drive
SSD: SanDisk Extreme 240GB SATA 6.0 Gb-s 2.5-Inch (OS is installed here)
Storage drive: Western Digital Caviar Black 1 TB SATA III (This was not connected when power supply died)

Detailed explanation:About a week ago my PSU (Seasonic 750w) died randomly while the computer was left running in sleep . I RMA'd the dead seasonic. In the mean time I happened to come accross an extremely good deal on a new PSU, so I bought it (Thermaltake smart m850w PSU) to have a backup and to get my machine working again. I hooked up the new PSU to GPUs, CPU, fans, ATX power connector, and to all of the SATA devices, (the SSD, the HDD, and the Optical drive). I made sure to connect the data cables to the SATA devices in the same configuration they were in when working properly. The computer boots successfully to the ASROCK BIOS, all fans spinning. However, I get the error code "A6" on "dr debug" (the led display on the mobo). The manual says this means "SCSI detect". I have no idea what that means.

I was able to load the UEFI, and bios recognized all components except for any of the SATA devices--(SSD, the HDD, and optical drive not recognized). The RAM, GPUs, processor, and fans were detected. At this point I was stuck in BIOS because I couldn't boot off anything.I did not have the HDD connected when the PSU failed, but now the BIOS won't read that either. I don't think any of the SATA devices are actually receiving power. Again, the UEFI showed that there were no SATA devices connected to any port, when in reality they clearly were connected both by power and data cable. Then things get really strange. I unhooked all of the SATA devices except the HDD (the one that wasn't hooked up when the original PSU died). I plug the AC into the PSU, then turn on PSU (not the power switch for the computer, the switch on the PSU). The computer starts flicking on and off in this weird rhythmic pulsating pattern "click...click...click...click..." with about a 1/2 second between each click. Each time the power flicks on, the LEDs come on and the fans spin briefly. The strangest part is that I don't need to hit the power button on the front of the case for this to happen, it just starts as soon as the PSU is turned on. In fact, I can't get the computer to turn on at all--the switch on the front of the computer appears to be dead.

1. Unplug the power cables from everything and re-seated them.

2. Reseated the data cables to the optical drive and the SSD on the drive end, not on the MOBO side as they are covered by my GPUs and I would have to take them out in order to do that.

3. Tried hooking up a SATA power cable from my old modular PSU and using that in the new PSU in an attempt to power the optical drive (didn't work, I know, bad idea--I learned you aren't supposed to do this shortly after I tried it)

4. Setting all preferences to default in the UEFI.

5. Disconnecting the power cables from one or both of the GPUs.

I think that this is either a problem with (1) the motherboard, (2) the new PSU, (3) all 3 SATA devices (unlikely). The fact that I can't even get into Bios anymore tells me that this may be a MOBO or PSU issue.My main question is how to procede from here? I suppose I can wait for my Seasonic to come back from RMA--perhaps that will clear up the issue. I just can't shake the feeling that this is a MOBO issue though. I am worried that if I keep screwing around with it I may end up frying my CPU and GPUs. I can eat the cost of a MOBO or PSU if necessary, but I can't afford to buy a new processor and two new 670s.

View 9 Replies View Related

Bios Won't Detect My Sata 80gb SeAGTE Harddrive

Jul 17, 2011

THE TITLE IS MY QUESTION...DRIVE HAD VISTA ON IT FOR YRS BOOTED WIN 7 CD AND CHOOSE TO DELETE PARTITIONS..I LET IT CREATE THE BACK UP PARTITIONS WITH 12GBG A 100mb AND THEN THE NISTALLATION PORTION..I INSTALLED..AFTER A REBOOT..DRIVE NEVER DETECTED AGAIN...WHEN ITS PLUGGED IN IOT FREEZES MY BOOT UP..CANT ACCCESS BIOS WHEN DRIVE PLUGGED IN..UNPLUG SERIAL CABLE..ALL IS WELL.

View 4 Replies View Related

Flashing Bios On An Adaptec 1220 SATA Drive Controller

May 26, 2009

I'm going to install RC1 in the next few days.

I was looking to test the stability within RC1 of an adaptec 1220SA card I have to control the system drives. I have the Vista 64bit driver for the card as this is the newest listed.

I have created a recovery disc in beta build 7000 and hope to use this to boot into a DOS shell and follow the instructions given on the adaptec site:

This is the BIOS release v6.0-0 Build 2330 for the Adaptec SATA II RAID 1220SA Controller.

This BIOS should only be used together with Driver v1.6.12086 in Windows Server 2008 or Windows Vista.

This self-extracting archive includes the flash utility, the BIOS image file and the Release Notes.

Caution: If the BIOS update fails with an error message "unable to find file" or "target controller does not match", please see ASK Answer ID 15241

Installation Instruction: This file is self extracting and will unzip to the directory adaptec1220sa. Copy the expanded files to a floppy diskette. The expanded files can also be copied to a USB device or CD-R.

Shut down the operating system and reboot to DOS from a bootable floppy disk, USB device or CD-R. Insert the media with the update files. Run the flash utility program named AFU.EXE included in this download to backup the current BIOS and flash the new BIOS image.

I'm hoping to expand the bios update file onto a cd for the second drive or alternatively stick it on a USB stick.

My question is this, when I am in the dos shell, what do I do!

I suddenly realised that i've never had a need to use the command line

View 5 Replies View Related

Hard Drive Not Detected By BIOS Or Disk Management?

Aug 27, 2011

I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.

View 29 Replies View Related

1TB Caviar Green No Longer Detected After BIOS Upgrade

Mar 2, 2012

Just after I upgraded my BIOS, I enjoyed a constant black screen after the BIOS Screen, which said something like CTRL + ALT + DELETE to reboot. It was no longer detecting something. So I removed the second HD and I was able to boot windows.

During the next boot I did the trick to connect the hard drive to the mobo during the Windows loading screen. And the HD became recognized, I was able to use it normally. In the next boot I left the hard rive connected and it wasn't detected by BIOS or Windows. I tried several cable combinations to see if there's a faulty one but no avail.

The weird part is that this drive does not emit any particular sound and most of faulty drives make noises. Another strange thing is that with the power supply connected the hard drive gets hot, really hot, like it's doing something...

Maybe I should downgrade the BIOS if I can. What do you think?

MOBO: Asrock 4g1m VS3.
PSU: 600W generic.
Western Digital Caviar Green 1 TB SATA (Like 5 months old)

View 5 Replies View Related

Lots Of BSOD / Lock Ups Or Hard Drive Not Being Detected By BIOS

Apr 13, 2012

Lots of BSOD, lock ups, hard drive not being detected by bios, is it failing? Let me start by saying my PC is custom built, most parts are only a year old. The oldest parts are the harddrive (about 5 years) and the soundcard (about 7 years). I have never had major problems until now (a year after building it).

It all started with a blue screen.
KERNEL_DATA_INPAGE_ERROR
Reboot windows and it seems to start up fine, gets to the desktop and locks up.

Reboot windows and I get another blue screen.
BAD_SYSTEM_CONFIG_INFO

I try to start windows from the last good configuration. Error. Registry file failure. Cannot load hive file. I try booting from the windows cd and running a chkdsk. Hard drive starts making a buzzing sound. It gets to step 3 of 5 and stops. Failed to transfer logged messages. Status 50. Now the bios rarely even "sees" the drive. When I can get it to boot and see it, any attempt at diagnostics and repairs produces errors, locks up, or fails.

Is this a bad hard drive? I would hate to spend the money on a new one only to find it is a bad mobo or virus. How can I diagnose this? If it is a bad drive I would like to save what juice is left in it and try to recover a few files before it dies. Most of the important data has been backed up but I would like to try and get a few game save files if I can. But its not a disaster if the drive data is not recoverable.

View 3 Replies View Related

"bios Detected A Problem With The Cooling Fan 902, Press Enter To Shutdown"

Sep 9, 2011

I've had my computer for over a year now and suddenly today i was watching a video when it lagged and then all of a sudden the screen went black. I turned it off and upon turning on again, I got the error "bios detected a problem with the cooling fan 902, press enter to shutdown" I have the lastest bios as far as I know and iv tried blowing into the slots with compressed air but nothing works.

View 2 Replies View Related

Windows 7 And Inf File And SATA Driver?

Sep 21, 2010

As I look around to gather drivers for a new install of Win 7 Pro from XP Pro, I am having a problem, the inf file. Does Win 7 have the inf file for GA-965P/DS3? I am also not sure about the SATA driver for the Gigabyte controller, since this is the one my sys HD is connected to; the ones I have on the disk that came with the mobo...earlier than Windows 7.

View 4 Replies View Related

Windows 7 Professional Usb 2 0 To Ide & Sata Driver

Jul 4, 2012

I bought a usb 2.0 to sata / ide so I could connect my old external hard drive from my old Windows XP computer to my windows 7 laptop. The USB 2.0 only wotls with Win 98, XP, ME and 2000. I need some thing that I can use to connect it to my Win 7 notebook.

View 4 Replies View Related

SATA RAID Driver - Windows 7 Cannot Be Installed To This Disc

Dec 30, 2009

Loading Windows 7 on a new computer. Trying to sort out this raid issue. Computer is :

Gigabyte GA-EP45T-Extreme
Processor : Intel Quad Q9400 LGA775
Ram : 4gb
Hard Drives : 3 x 1 Tb Seagate
Video Card : Radeon HD 4890

I've enabled the raid 5 in the BIOS. I've downloaded the driver from the Gigabyte Disc onto a flash drive. When I load Windows 7 it says " Windows cannot be installed to this disc. This computers hardware may not support booting to this disc. Ensure that the disk's controller is enabled in the computers BIOS menu". I've checked and rechecked the BIOS. I also downloaded the MSM64 Driver in the Gigabyte disc and that the one I copied to the flash drive.

View 5 Replies View Related

SATA Driver - Load In Windows 7 Or Vista Setup

Apr 29, 2010

How to Load SATA Driver in Windows 7 or Vista Setup ?

View 0 Replies View Related

During Install Of Windows 7 SSD(new) Isn't Detected, Unsure Of What Driver

Jan 15, 2013

It's HP M9652Uk with a none original drive. Silicon Power 2.5" SSD 60gb What drivers do I need and how do I instal them? Drive detected in bios but not during setup, also in ACHi mode

View 5 Replies View Related

Bluetooth Cannot Be Detected - Broadcom Windows 7 64bit Driver

Nov 20, 2012

I have tried the driver from the official Broadcom website but it doesn't install, just says that bluetooth cant be detected. Looking for link somewhere for 64 bit version but where I can find the correct driver?

View 1 Replies View Related

Changed The SATA Controller From AHCI To Raid SATA Result = FAILED?

Aug 10, 2010

Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:

At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED

On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.

View 9 Replies View Related

SATA 3 Not Working On Asus P6X58D-E Motherboard With SATA III Support?

Jun 27, 2012

Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?

View 9 Replies View Related

Install Sata Hard Drive As A Slave Where The Master Is Also A Sata?

Aug 10, 2011

i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7

View 4 Replies View Related

Wireless USB Adapter Model 5423 Driver Not Detected In Windows 7?

Jun 12, 2011

I bought USRobotics. wireless USB adapter but have problem with driver. I installed driver software but still not detect from system.

View 2 Replies View Related

SATA-II Drive On SATA Raid Controller?

May 7, 2011

i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?

View 5 Replies View Related

HP DV6150CA SATA Driver In XP PRO

Nov 24, 2009

Does any one know how to install sata drivers After XP has been installed?

I have a HP DV6150CA and I have to disable my SATA NATIVE from the bios just to be able to load XP.. But when I dual boot to Win 7 I can use it, disabled or enabled it works either way...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved