SATA Driver - Load In Windows 7 Or Vista Setup
Apr 29, 2010How to Load SATA Driver in Windows 7 or Vista Setup ?
View 0 Replies
ADVERTISEMENT
SATA Drivers - Load In Windows XP Setup On Dual Boot
Feb 27, 2010How to Load SATA Drivers in Windows XP Setup on Dual Boot PC ?
View 0 Replies View RelatedSamsung Sata 1tb Internal Hard Drive Down Load Driver?
Oct 22, 2011Ive got a samsung 1tb/5400rpm/8m) i need the driver to load in on insall of windows 7.
View 1 Replies View RelatedWindows 7 & Vista Dual Boot Installation - Vista Won't Load?
Sep 13, 2010New laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedSetup Sata Raid 0 On Windows 7?
Sep 15, 2011I have a Biostar mainboard with Sata Raid 0 enabled. I am trying to install win 7 sp1 but the install process asks for a driver. I thought the drivers are on the win 7 disk itself ? I do not have a floppy disc.
View 9 Replies View RelatedSATA Drivers - Load In Windows Recovery Options
Sep 24, 2010How to Load SATA Drivers in Windows System Recovery Options ?
View 0 Replies View RelatedNew SATA Controller Card, Windows Wont Boot, How To Load Drivers
Oct 27, 2011Quick summary: SATA Controllers on motherboard are not working. Ordered and installed a PCI-E SATA Controller Card. Connected Hard Drive & DVD Drive to new card ports. Upon attempting to boot installed windows 7, it spontaneously restarts before loading. It seems that I need to get the Controller Card's drivers installed. i try startup repair mode, and I can load the driver and see the Windows 7 installation after that, but then I don't know how to permanantly add the drivers for this installation.
View 1 Replies View RelatedSATA HDD - Cannot Get Drivers To Load
Aug 31, 2011I am building a workstation atm for my grandmother -
Spec's -
Spoiler :
Mobo - Gigabyte 990FXA-UD7 AMD 990FX AM3+
PCU - AMD Phenom II X6 1100T Black Edition 3.3Ghz
HDD - WD Caviar Blue 500GB SATA HD 7200/16MB/SATA-6G
SATA Hard Drive - How To Install And Setup
Mar 1, 2010How to Install and Setup a SATA Hard Drive ?
View 0 Replies View RelatedJust Got A Hp Pavilion Go But It Will Not Load Windows Or The Setup
Feb 3, 2012just got a hp pavilion go but it will not load windows or the setup
View 1 Replies View RelatedWindows 7 Setup Cannot Load Hard Drive
Mar 26, 2012I got a virus in my system that has halted my entire system. My laptop wont even start. So i tried to format it with windows 7 (32 bit), the Bootable CD loads fine, but the setup does not shows any partition in my drive.
The error message is no drive found.
[code]...
When I Put Disc In, It Doesn't Load The Windows 7 Ultimate Install Setup?
Aug 27, 2011I have a home premium (custom built) i didn't build, i also want to format hard drive. When i put disc in, it doesn't load the windows 7 ultimate install setup, why?
Specs
500gb hdd
4gb ram
i5 quad core
Replacing Sata Laptop Hard Drives From Vista To 7
Feb 9, 2010I want to put my old hard drive that has files and was used with windows vista and put it into a new windows 7 laptop. Is there any overlap or any config problems I can run into doing this? Or do I just put it in and the old files should work and all i have to do is update some drivers from vista to 7?
View 2 Replies View RelatedCan Format And Load Windows 7 Without Installing Vista First
Jul 17, 2012Nothing working right. No icons on desktop. Ads running in background. have to go into computer to get browser etc. Purchased computer with Vista on it.Up graded to 7 with MS window upgrade. Can I format and load win 7 without installing Vista first? I run virus and malware software and they found nothing.
View 2 Replies View RelatedLoad XP & Vista Software To Play On Windows 7
Mar 22, 2011i have a magix audio cleaning lab 12 deluxe that i used on my vista but it will not load into my new windows 7 touch screen acer computer.Is there a switch i can activate so that it will be recodnised by windows 7 if not then it is another £40 for a windows 7 version
View 3 Replies View RelatedHP Printer Software Setup.exe Will Not Load
May 17, 2011I have a computer with Windows 7. It's a 64 bit Acer. I've had the problem twice now with two different programs that the software installations will not begin. Zune software, but now HP All in ONE printer software.I've tried the following:
1. Running from DVD disks AND full download from HP
2. Run in Safemode
3. Reset misiexe and Autoplay functionality
4. Ran windows update
5. Disabled Norton and Ran Malwarytebytes (all fine)
6. The file will extract to the %TEMP% folder. I've tried running the setup.exe from there AND re-saving it elsewhere.
7. HP Customer Support had me create another user admin account- nothing.
Cant Load 7 Over Vista?
Jan 6, 2011I have a Gateway dx4200 quad core with vista home premium 64 w/ sp1 trying to upgrade to 7 ultimate Ive tried clean install, upgrade even repartition and tried dual boot I keep getting the same result goes strait to system recovery options on reboot.
View 5 Replies View RelatedWMC Setup - Upgraded From Vista Premium?
May 31, 2011Going through an upgrade to Windows 7 (Ultimate x64 from Vista Home Premium x64) and saved the media center setup for last before I move my files back to the original locations. However, I am having problems with the TV setup. I have made no hardware changed during the upgrade and have been using the Hauppague 2250 WIN TV HVR-2250. I reinstalled the WMC specific drivers for Widows 7 and went through the process, and to summarize, no go. Setup manually and went to a channel to check this and got the message "Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart computer." I am just connecting the OTA antenna and pulling the local digital signals (no cable) so it is just limited to that signal. Here is where I think the problem may have originated.During the setup, I relocated all default user profile directories to another partition (away from the standard system drive) through the registry. I am assuming that doing this, I moved the file location where the source file is directed to this partition and WMC is still looking in the "default" location for the video source so I will need to edit the registry to change the default location to the new user profile location.
How I drew this conclusion:I went ahead and installed WinTV v.7 because i wanted to record some old VCR footage through the s-video connection. Was having similar problems where the program was reverting to the default location (the "C" drive), and it was not picking up the TV signal. I changed the default location (to locate the "buffer" and "data" file in the program to the new user location and that straightened everything out for that program. So the assumption is that WMC is experiencing the same problem and i need to modify the default location in the registry to redirect WMC.
1. Are there multiple registry edits that need modified or is there a single location where these edits need to take place.
2. Since you do not have an option to edit directly in WMC, if I make these changes in the registry, reboot & restart the WMC setup process, will the setup process automatically revert to the original ("C" drive) location or will these changes hold through the setup process and I can go through the automatic setup process without problems. (Or do i have to go with the manual process).
XP / Vista / 7 Network Setup Problems
Jul 6, 2009I have spent at least 2 wks. trying to fix this. I've built dozens of computers (NewEgg)for my home,business and friends. And in 9 years I've only seen maybe 3 BSOD's. Networks have ALWAYS worked. Even w/ Windows 7 Beta, all was well. I just did a fresh install of Windows 7-7260 on my M1530 then did the same on my own computer.
Specs are in profile. Then I put 7250 on my downstairs friend's M1530. We are all on the same network group named CovellRussin. No variations. We live in the sticks so security is not a problem. DLink 825 router/DLink 1522 AP/DLink Switches.
Wife's Laptop is XP, a WHS, 3-Windows 7's, 1 Vista Premium on a M1330.
Like I said, up until I loaded 7260, the network was fine. I have tried EVERYTHING I can think of and MY computer will not see my wifes Xp(which has the QBooks and Tax programs on it). My M1530 sees her XP, My Computer and itself. My computer sees itself and the M1530. Is there a tutorial on setting up a mixed network for Win 7? If I don't fix this fast, I'm going to change my mind about loving 7. I am willing to go step by step with someone. I'll pay if I have to. I need my sanity and my computer back!
Windows 7 And Inf File And SATA Driver?
Sep 21, 2010As I look around to gather drivers for a new install of Win 7 Pro from XP Pro, I am having a problem, the inf file. Does Win 7 have the inf file for GA-965P/DS3? I am also not sure about the SATA driver for the Gigabyte controller, since this is the one my sys HD is connected to; the ones I have on the disk that came with the mobo...earlier than Windows 7.
View 4 Replies View RelatedWindows 7 Professional Usb 2 0 To Ide & Sata Driver
Jul 4, 2012I bought a usb 2.0 to sata / ide so I could connect my old external hard drive from my old Windows XP computer to my windows 7 laptop. The USB 2.0 only wotls with Win 98, XP, ME and 2000. I need some thing that I can use to connect it to my Win 7 notebook.
View 4 Replies View RelatedSATA Driver Detected In Bios But Not In Windows 7
Mar 30, 2012When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies View RelatedSATA RAID Driver - Windows 7 Cannot Be Installed To This Disc
Dec 30, 2009Loading Windows 7 on a new computer. Trying to sort out this raid issue. Computer is :
Gigabyte GA-EP45T-Extreme
Processor : Intel Quad Q9400 LGA775
Ram : 4gb
Hard Drives : 3 x 1 Tb Seagate
Video Card : Radeon HD 4890
I've enabled the raid 5 in the BIOS. I've downloaded the driver from the Gigabyte Disc onto a flash drive. When I load Windows 7 it says " Windows cannot be installed to this disc. This computers hardware may not support booting to this disc. Ensure that the disk's controller is enabled in the computers BIOS menu". I've checked and rechecked the BIOS. I also downloaded the MSM64 Driver in the Gigabyte disc and that the one I copied to the flash drive.
Changed The SATA Controller From AHCI To Raid SATA Result = FAILED?
Aug 10, 2010Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
SATA 3 Not Working On Asus P6X58D-E Motherboard With SATA III Support?
Jun 27, 2012Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?
View 9 Replies View RelatedInstall Sata Hard Drive As A Slave Where The Master Is Also A Sata?
Aug 10, 2011i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies View RelatedSATA-II Drive On SATA Raid Controller?
May 7, 2011i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies View RelatedHP DV6150CA SATA Driver In XP PRO
Nov 24, 2009Does any one know how to install sata drivers After XP has been installed?
I have a HP DV6150CA and I have to disable my SATA NATIVE from the bios just to be able to load XP.. But when I dual boot to Win 7 I can use it, disabled or enabled it works either way...
Sata Driver Installed On Bootup?
Apr 1, 2011...every time I boot my system, Windows says it is installing the SATA driver. BIOS entries are OK, once drivers are installed, Disk Management shows everything OK too. So, what could be the cause for this? I have two disks, the System SSD (OCD Vertex II 60GB SATA) must have its driver installed to boot Windows, so the msg must refer to the second HD (Seagate 1TB SATA
View 1 Replies View RelatedInstall SATA Controller Driver
Nov 5, 2009I've just bought parts and collected a new PC system. My Motherboard is AsRock M3A785GXH/128 ASRock > Products > M3A785GXH/128M
and regarding to the manufacturer it should be Windows 7 hardware ready.
But I can't install Windows 7 pro 64 bit on my new system. The Windows 7 installation application can't see my harddrives and want a driver to them. I assume that should be a driver for the SATA controller on the motherboard. I've tryed to use the drivers on the motherboard cd-rom and tryed to use the drivers froms asrock homepage, but Windows 7 wont accept them.
I have contacted AsRock about this issue, but I'm wating for an answer and hoped that you guys might has seen this problem before, and will answer quicker than AsRock Support
I should say that I cant install Windows Vista Business 64bit without any problems at all.
Cannot Find A Driver For A Sata Controller
Feb 25, 2011I have an asus m2n32ws pro motherboard and am running win 7 ultimate 64 bit and have a problem device _ it is a sata controller that has no driver and i have searched and cannot find out a what the device is nor b a driver anywhere
View 6 Replies View Related