HP Printer Software Setup.exe Will Not Load
May 17, 2011
I have a computer with Windows 7. It's a 64 bit Acer. I've had the problem twice now with two different programs that the software installations will not begin. Zune software, but now HP All in ONE printer software.I've tried the following:
1. Running from DVD disks AND full download from HP
2. Run in Safemode
3. Reset misiexe and Autoplay functionality
4. Ran windows update
5. Disabled Norton and Ran Malwarytebytes (all fine)
6. The file will extract to the %TEMP% folder. I've tried running the setup.exe from there AND re-saving it elsewhere.
7. HP Customer Support had me create another user admin account- nothing.
View 14 Replies
ADVERTISEMENT
Feb 3, 2012
just got a hp pavilion go but it will not load windows or the setup
View 1 Replies
View Related
Mar 26, 2012
I got a virus in my system that has halted my entire system. My laptop wont even start. So i tried to format it with windows 7 (32 bit), the Bootable CD loads fine, but the setup does not shows any partition in my drive.
The error message is no drive found.
[code]...
View 1 Replies
View Related
Apr 29, 2010
How to Load SATA Driver in Windows 7 or Vista Setup ?
View 0 Replies
View Related
Aug 27, 2011
I have a home premium (custom built) i didn't build, i also want to format hard drive. When i put disc in, it doesn't load the windows 7 ultimate install setup, why?
Specs
500gb hdd
4gb ram
i5 quad core
View 9 Replies
View Related
Feb 27, 2010
How to Load SATA Drivers in Windows XP Setup on Dual Boot PC ?
View 0 Replies
View Related
Apr 10, 2012
I want to install printer driver for hp laserjet 1100 on my 64 bit windows 7 home premium
View 1 Replies
View Related
Dec 10, 2011
I was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies
View Related
Jul 3, 2012
I want to share a printer with another wired computer on my home network. Sorry haven't a clue and didn't find anything with the search except broad examples. Is there a tutorial. It would be from a Windows 7 machine on a wireless router to a W8 machine wired in.
View 3 Replies
View Related
Sep 6, 2011
how can I setup connection with my wireless printer?
View 1 Replies
View Related
May 3, 2012
I have two windows 7 computers. computer-A is connecting EPSON printer and I have enabled the file and printer sharing function. The file sharing function is working fine. Then I tried to add the printer in control panel on computer-B, it sees the epson printer but when I try to install the driver (download from computer-A) then it say unable to connect. I have try it on different computer-C it is saying the same thing. What should I do?
I have installed the EPSON driver in computer-B (hoping it would work)but still after the install the driver (download from computer-A) by itself then it says unable to connect the printer.
I have setup all the computers with the group name of WORKFROUP. You may wonder why I don't use the Windows 7 Homegroup, it is because I have some XP computers need to use that computer-A's printer. how to make the printer sharing works. [URL]
View 2 Replies
View Related
Apr 16, 2011
I recent purchased a a new computer with Windows 7 Home Premium x64 and a Canon MG5220 Inkjet All-in-One printer. I have setup printer to be wireless (no problems). When I run the setup disk to start downloading the drivers, etc. I get the message that the Print Spooler Service stopped and to restart the computer. I have done that several times. Every time have to restart the spooler in the print spooler properties only to have have it stop a few seconds later when I try to re-run the setup disk. I have deleted the files in the printer and driver files under windowssystem32spoolerdrivers. There is a file called color in the driver filer. I have cleaned up the registry. I have tried the Window Fix.
View 3 Replies
View Related
Feb 2, 2012
setting up a Network Printer for my small office with four (4) PC/Computers with the following details:
1. I dont have an Internet connection.
2. I have a printer with LAN capable
I wonder if I can use a switch, hub or routers but there are plenty of a kind, I don't know what to use and how to use.
View 3 Replies
View Related
Oct 6, 2009
Unable to get an HP Laserjet 1200 printer set up over my network. Running Windows 7 Professional 64 bit. I can see then printer when browsing network for printer but Windows insists on searching Windows Update, striking out and when browsing for other files I can't get any other HP *.inf files (both 32 & 64bit) I downloaded to take without crashing with errors. I connected the printer directly to my PC with a USB cable and Windows instantly recognized it and installed a driver for it. But still can't connect with it's hooked up on another workstation. Yes, it's set up for sharing on the other network PC.
View 9 Replies
View Related
Aug 26, 2012
I am finding it totally impossible to load a driver for a new HP printer CP 2025DN on WIndows 7,despite several attempts the system gets to the final stage and then 'unable to load device', as I am at an end for ideas, can you please assist?
View 9 Replies
View Related
Dec 1, 2012
i cant load the drvers (dell printer all in one 962) on my windows 7 laptp. dells web site dont have them'
View 2 Replies
View Related
May 27, 2012
My parents brand new pc - a dell desktop - Windows 7 - i5 core, a really nice fast machine. They have a HP psc 2410 photosmart printer that they used on their old machine. I installed it on the new one, it installed fine - no problems. However, on some websites - and I can't figure out exactly why some work and some don't, but for instance - on the Food Network site, when she goes to print a recipe, it will overlay the pages on top of each other. It does this even in the print preview.
Also, she can no longer click on "clickable links" in emails. Or even on some web pages. For instance - the "manage attachments" link below, which I can access on my machine with no problem, here on this new PC, does absolutely nothing.
We are using IE9, that came installed. All updates have been done. I have never seen this behavior before - and I'm stumped.
View 2 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
View Related
Apr 7, 2012
Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies
View Related
Jan 16, 2009
When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies
View Related
Jan 12, 2013
Recently my computer is always at 100% even when no apps are running. But as soon as i run Task manager load reduces. This doesnt happen in safe mode. Im sure that this is a virus. When i scan my computer with Avira Antivirus (Free) it doesnt detect anything
View 16 Replies
View Related
Oct 28, 2009
I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
View 1 Replies
View Related
Apr 26, 2011
having moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies
View Related
Dec 18, 2012
I bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies
View Related
Jun 25, 2012
download in my computer hp laserjet driver P1007
View 1 Replies
View Related
Jul 14, 2012
Why did my computer stop recognizing my printer. I cannot find my printer desk.
View 2 Replies
View Related
Mar 8, 2012
I use Windows 7 Professional 64 bit. My problem is: Whenever I try to print something (word, pdf, or any other file); printer spooler stops working and when I check the Devices and Printers all the printer drivers seem to be disappeared. I checked the Print Spooler" in the Services tool; and set the "Recovery after subsequent failures" option to Restart the Serviceā. Therefore all the printer drives coma back after 1 minute. However the spooler stops immediately again when the uncompleted printing job starts; hence I can not print anything more than a page. Earlier in this forum, someone posted that Microsoft issued a hotfix for this problem ( hotfix 2388142) which can be downloaded from article: [URL]. I downloaded this hotfix and tried to install, however it gives an error message of: The update is not applicable to your computer and quits installation. I did uninstall and reinstall all the printer drives, but this did not help either.
View 1 Replies
View Related
Jul 8, 2011
I have 2 computers on my home network. My desktop is running Windows 7 ultimate 32 bit and I have a kodak 5500 Aio connected to it. I also have a laptop that's running windows 7 home premium 64 bit that connects wireless. I was able to print until today and now I can't print from the laptop. I can see the printer in the add printer window but comes up with cannot connect with error of 0x0000000d
View 2 Replies
View Related
Jan 12, 2012
i want to download software and driver for hp laser jet p1007 . I am unable to use my printer.
View 1 Replies
View Related
Aug 22, 2012
my AIO printer is listed in Windows 7 Device manager as printer and fax separately.Printer acts as a fax machine I am not able to use windows fax and scan modem facility in my windows How can I change the present set up
View 1 Replies
View Related
