I got a virus in my system that has halted my entire system. My laptop wont even start. So i tried to format it with windows 7 (32 bit), the Bootable CD loads fine, but the setup does not shows any partition in my drive.
i have a hp laptop and it in the shop. tech has advised that window is not loaded on the hard drive and he wants be to pay for a hard drive which he thinks will correct the problem if not he saying its the motherboard wit have a diagnostice code 0601 blanking cursor
During the reinstallation of Windows 7, the operating system did not find the hdd. on some forum I visit they have to say download the drivers. but I do not know where to find its drivers. [code]
So my trusty old 40 GB Maxtor HDD finally died, and I'm trying to install Windows 7 on a 250 GB Western Digital Caviar SE 16 (SATA II). Windows will boot off of the DVD, load the setup, ask me if I want to perform an install or a repair, and then it asks if I want to upgrade or do a "custom" setup. I choose custom since it's a clean drive, but then it shows me a blank list of drives with the option to load a driver. My motherboard is a Gigabyte GA-G41M-ES2H, so I went to Gigabyte's website and downloaded the drivers and put them on a USB thumb drive. I spent hours trying to load different drivers to no avail. I tried the CD that came with the motherboard; no dice. I tried 32 and 64 bit installations; neither worked.
But you know what did work? My 180-day trial copy of Windows Server 2003. It detected that hard drive like Western Digital made it just for 2003.
i set up a HTPC recently, have an extra hard drive with all my movies backed up, have tried setting up sharing but it still won't show up to view on other computers on the network. running windows 7 pro on host windows 7 premium and pro on others.
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
I already have Windows 7 installed on my laptop, and now I am trying to fix a laptop in my house that has had a virus on it for a while that corrupted XP (about 8 months it has had it).
then when running a setup for XP to try and fix it it corrupted itself and then got permanently stuck on a setup. so now I started looking at it and I saw that there was an option for it to revert to the way it was when it had working settings.
so I am uninstalling everything and deleting everything
but I want to format it completely (so there will be NOTHING left)
so can I do a full format while using the Windows 7 Ultimate disc?
please don't say to do a quick format since I don't want to do that, I have been reading some of the posts in the forums and people say to use a quick format and they don't say if you can do a Full format.
I recently purchased a WD Scorpio Black 320GB 2.5" HDD for my Gateway MX6920 notebook. I wanted to upgrade to this larger, faster HDD and replaced it into my notebook and attempted to install Windows 7. During setup it stopped and gave the error 0xc00000e9 for "unplugging a removable storage device such as an external USB drive ......".
I tried installing Windows XP and it gets to a blue screen to choose a Repair of Windows or a fresh install. Choosing either one returns a blue screen that says system can not find a Hard disk connected.
I put this drive into an enclosure and formatted it in another computer. Also it is recognized in BIOS. I'm running BIOS version 77.08 if relevant.
My hard drive crashed on my laptop. Before It crashed, It gave me a hard drive warning of imminent failure, and gave me an option to create recovery disks. I ended up creating 11 disks from the option. I installed the new hard drive and the BIOS reads that it will boot from the internal optical drive first. When I insert the first CD and start then computer, it continues to read "Operating system not found". When I look at the CD in another computer, it reads three files and one folder. The first file is an icon file which reads "Setup", the next is a "Media" bin file, and the last is an autorun setup information file. The last is a folder that contains various other backup files. My computer did not come with any copies of windows.
i bought a trix hard drive enclosure/case for my 2.5 250GB hard drive. I connected everything up and inserted the hard drive usb into my laptop but windows will not show the drive in my computer. It does make the beeping noise telling me its detected the drive and it also shows in device management.The strange thing is i tried installing linux on it and it did, but the computer will not boot into it from the enclosure, but does from the hard drive. Ive also tried it on 2 computers and both will not assign the drive and give it a drive letter.
I have raid 5 setup, on a ASUS P5K WS motherboard using matrix storage manager. Just copied everything on to it, now a hard drive has failed. I got new hard drive but its seen as none Raid and raid showing as failure ?
I have a home premium (custom built) i didn't build, i also want to format hard drive. When i put disc in, it doesn't load the windows 7 ultimate install setup, why?
I have a computer with Windows 7. It's a 64 bit Acer. I've had the problem twice now with two different programs that the software installations will not begin. Zune software, but now HP All in ONE printer software.I've tried the following:
1. Running from DVD disks AND full download from HP
2. Run in Safemode
3. Reset misiexe and Autoplay functionality
4. Ran windows update
5. Disabled Norton and Ran Malwarytebytes (all fine)
6. The file will extract to the %TEMP% folder. I've tried running the setup.exe from there AND re-saving it elsewhere.
7. HP Customer Support had me create another user admin account- nothing.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I have been trying to install a copy of an x86 version of Windows 7 Ultimate for weeks. For some reason when I first installed it It did not recognize my hard drives. I was ok with the upgrade at first (from Windows Vista Ultimate) but along with the disk space it is taking up from windows.old, I want a clean copy. When I go in the setup, click install, and go to the Custom Install tab, no hard drives or partitions show up. I have tried installing drivers from the Western Digital site, to no avail.The ultimate question I am trying to get answered is how do I get a my hard drives to show up on the setup and finally get to my destination of having one partition, with my copy of Windows 7 Ultimate on it? This is the information of the hard drives and where I tried to download the drivers to allow the installation to work: WD Support > Installation > SATA & SAS > WD Caviar SE / SE16 (SATA I)
I tried to load the drivers at the installation and apparently they were not the correct ones, although the most recent ones I could find were for WinXP.I am getting frustrated with Windows 7! I also have a problem where I am not sure If my video card is working properly or not, but that is another issue that I have posted on that the advice I received did not work..
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.