Computer Is Not Booting Hard Drive/Unresponsive Hard Drive?
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
ADVERTISEMENT
Apr 29, 2011
If I'm running utorrent when I put my Windows 7 pc to sleep, after it wakes my external hardrive will become completely unresponsive. Usb hardrive at this point will not eject properly so I have to either unplug it unsafely or reboot PC to regain control of drive. If I remember to shut off Utorrent before I put PC to sleep, PC will wake fine with ex. hardrive working fine. I can avoid having to turn Utorrent off first before I put my PC to sleep?
View 1 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
May 6, 2009
My computer yesterday was an XP machine with one hard drive. I wanted to test Windows 7 but I was afraid I would screw something up with my XP drive in the process. We'll call this Drive A.
Yesterday I bought a new hard drive, Drive B. I downloaded the Windows 7 ISO, got some drivers, and turned off my computer. I physically removed Drive A from the computer and put Drive B in. I started the computer and put the DVD in. Setup was fine, I had some trouble with getting the onboard NIC to work but I was able to overcome.
Now I needed to get back into my XP install to get some stuff done (play video games). I shut my computer down, pulled out Drive B, put Drive A back in and booted up. But I got a boot error message, and it looks like it's a Windows 7 Boot error message. How can this be if I removed the hard drive.
0xc000000e
The boot selection failed because a required device is inaccessible
It's almost as if my computer is trying to boot to Windows 7 even though I removed the hard drive containing the operating system. How do I get into my XP system? The drive is fine, I connected it as a slave and I can access the files on there. I'm guess Windows 7 makes some kind of change on the motherboard that forces it to boot to 7?
View 1 Replies
View Related
Oct 19, 2012
My friend asked me to fix her laptop, which has been failing to boot, getting as far as the blue Windows 7 login screen then hanging. The login UI doesn't load, it's just the blue background.I tried to re-install Windows from the boot disc, but when I put in the disc, I wasn't able to boot from it. Instead the computer booted from the hard-drive again and hung at the same place. This is after changing the boot priority in the BIOS.Since the laptop is out of warranty, and is to all intents and purposes a brick, I removed the Hard-drive, and connected it to my computer to see if I could reformat the drive from there. The thing that has really puzzled me though, is that my computer wouldn't boot when this hard drive was attached, despite running fine before I attached the drive, and after I removed it.
Which leads me to think there's possibly a really malicious virus or something on the drive, which makes it the default boot device, despite having a corrupted operating system installed that won't boot.
View 7 Replies
View Related
Mar 21, 2011
Ok I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
View 9 Replies
View Related
Mar 5, 2012
Motherboard: Asus A8N5X
So after the hard drive fiasco that I reported in another thread, I got clever and decided to create an "Emergency Boot Drive" that would have Windows on it as well as some utilities for data recovery. I took one of the many old hard drives that I have floating around and plugged it into the computer AND unplugged my other two drives. Then I ran Windows Install off the DVD and installed Windows to the old drive. I installed my software. All was good. I plugged in the other two drives and tried to boot from the "Emergency" drive and it worked fine.Last step was to unplug the emergency drive from the motherboard, connect it via USB and try to boot. The BIOS sees the drive and I tell it to boot from the drive. So the computer is booting. The "Starting Windows" message comes up and then the system reboots. This happens everytime I try it.Does Windows reset the USB ports so that the drive suddenly vanishes?
View 9 Replies
View Related
Jul 2, 2012
I had my old hard drive installed in my Windows 7 computer. It worked for several months but now it started booting from the old drive that still has Windows Vista on it. My simple fix has been to unplug that drive while booting it up. Can I just delete the Windows Vista files?
View 7 Replies
View Related
Nov 8, 2012
It just shows the blue colour only but not recognized by laptop
View 1 Replies
View Related
Jan 5, 2010
I am trying to wipe my current XP installation clean and move on to Windows 7.
I first tried to install the setup.exe (Custom install option of course) from within the XP OS, but soon discovered you cannot do that and wipe out my only partition on C: at the same time.
I don't have a DVD-RW drive to write a boot disk, so instead I am trying to install through my external hard drive. I meticulously followed this tutorial from PC World yet when I instruct the PC in BIOS to boot from the external hard drive, I keep getting an "invalid system disk, press any key" error when the computer boots and looks for the setup files. This is despite the fact that setup seems to work perfectly from within the XP OS.
PC World tutorial:
Install Windows 7 From an External Hard Drive - PC World
Can anyone please offer me any helpful advice to get the external hard drive setup to work or help me find a way to install 7 from within XP?
Anyone know exactly why I keep getting the "invalid disk" error each time when I try to boot from my external hard drive? As mentioned in the PC World tutorial, I marked the external hard drive as an active partition and the setup files seem to work fine from within XP. If it helps, in the external hard drive root folder is both the Windows 7 ISO and all the files contained (which I extracted using PowerISO).
View 0 Replies
View Related
Feb 21, 2011
I have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Aug 17, 2012
This week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.
I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared
View 9 Replies
View Related
Feb 14, 2012
how do I disable message that come while booting s m a r t hard drive detect error!
View 3 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Jun 12, 2011
can i add c drive from an HP windows xp to a asus windows 7?
View 1 Replies
View Related
Aug 31, 2011
*I have a new windows 7 (professional 64) machine.
*I removed my two hard drives from my old computer (windows xp).
*I installed them in my new computer as drive F and G
*I want to be able to use my programs and access all my data on my old drives, in my new computer
*I want to be able to access my old outlook data, including email from my old drives
*I see a bunch of folders in my F and G drives, but can't seem to use any of the program files and I don't even see "my documents" from my old computer or any outlook files...maybe I am lookign in wrong place.
View 8 Replies
View Related
Oct 25, 2011
How to use 2 hard drive in one computer
View 4 Replies
View Related
Oct 23, 2011
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies
View Related
Jan 3, 2012
My computer is running realllllly slow, and I'm not sure why.There's a lot of extra space on the computer, and Hardly anything running in the back ground. I just put a new hard drive in the computer, as it has done this previously, It slowed to a point where it would freeze and no longer work, until one day I turned it on, went to log in and it automatically restarted, so I discovered that the hard drive had crashed, I put a new one in it and it was fine, until about 2 weeks ago, when it started slowing down majorly.
View 6 Replies
View Related
Oct 13, 2010
I'm trying to get my Computer to sleep but it won't because of the Western Digital 1TB external hard drive that is connected to my network. The backup program is causing this problem, if I turn it off then it will sleep. I would like to keep it turned on because it will save any changes that are made to my folders and files. I would use the back program that comes with Windows 7, but that doesn't work. I get "Access is denied" Error code: 0x80070005. I think the problem may be from being connected to a network.
View 5 Replies
View Related
Aug 24, 2011
I'm fully formatting a second hard drive in my computer and it's a 3tb drive so it's going to take a while. I was wondering if I could watch videos I have on my other drive or if that would cause the process to run less efficiently or even skip sectors it was supposed to check.
View 9 Replies
View Related
Dec 10, 2009
I just bought a new computer, i7 860 and have put 7 x64 on it.
my motherboard is ausus p7p55d and has one ide socket on the board.
I was using this socket for my cd and dvd drives but I have detached them so I can plug in my old IDE hard drive.
I was using the IDE drive just 2 days ago in my old system.
Sometimes when I boot up the drive is seen and sometimes not.
when the drive is seen I try and copy some files over to my new sata drive I have in the new system. some of the files copy over but the the IDE drive always gets stuck. when I try to cancel the copy windows stops responding partially and I cant get out of the copy window and the old IDE hard drive explorer window.
So I restart windows and normally it now doesn't see the IDE drive.
What is going wrong?
How do I get my files off this hard drive?
View 9 Replies
View Related
Sep 3, 2011
So i build a newcomputer yesterday. I decided to use my old SATA hard drive from my computer, it has my OS, and other files on it. I get everything put in, but when i start the computer it says "no hard disk is detected".
I enter the bios menu, and i notice it recognizes that it is in there, as well as my disk drive.
How come it wont let me load my hard drive, and it doesnt detect it when i start it up.. but BIOS sees that its there?
View 3 Replies
View Related
Mar 17, 2012
My computer isn't picking up my other two hard drives. They appear when i turn on my computer and only sometimes with that. They don't appear to let me assign a letter or path to them either. They are both 250 gb drives and both are standard in computer but neither are accessible. If anyone has any ideas that would be great. Command line functions to check if i have drives isn't working either.
View 1 Replies
View Related
Jul 12, 2011
I have a laptop that is about a year old. Recently, my system rebooted and I was no longer able to view my Programs, files on the Hard drive or any other document. Here is the twist. I am still able to log into windows, use the Internet Explorere. If I happen to know the location of the file I can pull it up. It seems like i have no viewable rights to my C: drive at all. but can still work on files and programs.
View 1 Replies
View Related
Dec 14, 2009
I currently have Win 7 Ultimate 64-bit edition installed on my machine. (listed in my sig)
I am considering getting an x58/Core i7 920
Will i be able to just swap my hard drive from one motherboard to another or do you thing a fresh install is at hand?
In the past i have been able to swap hard drives from one gigabyte motherboard to another (both LGA 775) but i'm not sure if i will be able to do this from LGA 775 to LGA 1366.
View 1 Replies
View Related
