I had my old hard drive installed in my Windows 7 computer. It worked for several months but now it started booting from the old drive that still has Windows Vista on it. My simple fix has been to unplug that drive while booting it up. Can I just delete the Windows Vista files?
View 7 Replies
After a hard drive failure on a 500 GB hard drive, I restored the image onto a new 1TB hard drive.
Windows is showing the C: drive with 224 GB and partition D: with 225 GB.
I'm guessing that Windows doesn't know that it's on a 1TB drive now, so how do I get access to the missing 500GB?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedMy computer yesterday was an XP machine with one hard drive. I wanted to test Windows 7 but I was afraid I would screw something up with my XP drive in the process. We'll call this Drive A.
Yesterday I bought a new hard drive, Drive B. I downloaded the Windows 7 ISO, got some drivers, and turned off my computer. I physically removed Drive A from the computer and put Drive B in. I started the computer and put the DVD in. Setup was fine, I had some trouble with getting the onboard NIC to work but I was able to overcome.
Now I needed to get back into my XP install to get some stuff done (play video games). I shut my computer down, pulled out Drive B, put Drive A back in and booted up. But I got a boot error message, and it looks like it's a Windows 7 Boot error message. How can this be if I removed the hard drive.
0xc000000e
The boot selection failed because a required device is inaccessible
It's almost as if my computer is trying to boot to Windows 7 even though I removed the hard drive containing the operating system. How do I get into my XP system? The drive is fine, I connected it as a slave and I can access the files on there. I'm guess Windows 7 makes some kind of change on the motherboard that forces it to boot to 7?
My friend asked me to fix her laptop, which has been failing to boot, getting as far as the blue Windows 7 login screen then hanging. The login UI doesn't load, it's just the blue background.I tried to re-install Windows from the boot disc, but when I put in the disc, I wasn't able to boot from it. Instead the computer booted from the hard-drive again and hung at the same place. This is after changing the boot priority in the BIOS.Since the laptop is out of warranty, and is to all intents and purposes a brick, I removed the Hard-drive, and connected it to my computer to see if I could reformat the drive from there. The thing that has really puzzled me though, is that my computer wouldn't boot when this hard drive was attached, despite running fine before I attached the drive, and after I removed it.
Which leads me to think there's possibly a really malicious virus or something on the drive, which makes it the default boot device, despite having a corrupted operating system installed that won't boot.
Ok I have a emachine e725 running windows 7 32bit and a acer running on windows vista. My emachine recently crashed in the blue screen and I tried to complete a system restore. I was able to get through the advanced boot menu and use the repair your computer option to restore windows. During the windows setup process I got another blue screen and the computer restarting. It then started the process over and once it got to the step that says windows is preparing setup, it gives an error msg saying something along the lines of windows was interupted and needs to restart to complete installation, and it has an option to press ok. This cycle continues and I can not open in safe mode because it says "windows can not complete the installation in safemode. Also the option to repair your computer in the advanced menu options is no longer available. So after wrestling with windows starting up I decided to create a back up and restore disc on my acer for my windows 7 computer. I tried putting it on a disc but it would not boot. So I tried creating a installation disc of windows 7 and tried booting from the cdrom drive. Once I did that I got a error msg saying "device driver not found: MSCD001 No valid cdrom device drivers selected. It then gives me the A:>. Im not sure if I created the disc wrong since I cant unzip the entire file I downloaded with needing an encryption password.
View 9 Replies View RelatedMotherboard: Asus A8N5X
So after the hard drive fiasco that I reported in another thread, I got clever and decided to create an "Emergency Boot Drive" that would have Windows on it as well as some utilities for data recovery. I took one of the many old hard drives that I have floating around and plugged it into the computer AND unplugged my other two drives. Then I ran Windows Install off the DVD and installed Windows to the old drive. I installed my software. All was good. I plugged in the other two drives and tried to boot from the "Emergency" drive and it worked fine.Last step was to unplug the emergency drive from the motherboard, connect it via USB and try to boot. The BIOS sees the drive and I tell it to boot from the drive. So the computer is booting. The "Starting Windows" message comes up and then the system reboots. This happens everytime I try it.Does Windows reset the USB ports so that the drive suddenly vanishes?
It just shows the blue colour only but not recognized by laptop
View 1 Replies View RelatedI am trying to wipe my current XP installation clean and move on to Windows 7.
I first tried to install the setup.exe (Custom install option of course) from within the XP OS, but soon discovered you cannot do that and wipe out my only partition on C: at the same time.
I don't have a DVD-RW drive to write a boot disk, so instead I am trying to install through my external hard drive. I meticulously followed this tutorial from PC World yet when I instruct the PC in BIOS to boot from the external hard drive, I keep getting an "invalid system disk, press any key" error when the computer boots and looks for the setup files. This is despite the fact that setup seems to work perfectly from within the XP OS.
PC World tutorial:
Install Windows 7 From an External Hard Drive - PC World
Can anyone please offer me any helpful advice to get the external hard drive setup to work or help me find a way to install 7 from within XP?
Anyone know exactly why I keep getting the "invalid disk" error each time when I try to boot from my external hard drive? As mentioned in the PC World tutorial, I marked the external hard drive as an active partition and the setup files seem to work fine from within XP. If it helps, in the external hard drive root folder is both the Windows 7 ISO and all the files contained (which I extracted using PowerISO).
I have a laptop that has Vista installed on it. I have an upgrade disc for Windows 7 and I am thinking about performing a "clean installation" over the Vista OS - which I know is allowed, on the following link;click here Now, I would like to create another partition (on the same hard drive) and install Vista (using the same disc that it came with the laptop) onto that blank hard drive partition
View 10 Replies View RelatedThis week, I encountered the following strange problem for which I haven't found a final solution so far, though I have found some bandaids. But having a complete solution -or at least a reason why this problem occurs- would be great:I have a working installation of Windows 7 Professional x64 in UEFI mode. The main disk, SSD #1, contains the following partitions (using GPT): ESP, MSR, system, data. An additional disk, HD #2, with a single data partition (using MBR) is also attached to the system. With this setup, everything works fine.Now, after adding another disk, HD #3, to the system -my old system disk (bootable, using MBR, one active primary partition and an extend partition with three logical disks)- Windows will no longer boots completely: The boot process begins, the Windows logo is shown. Then, a message is shown in text mode "Windows is loading files" with a loading bar. After a while the boot process stops and I am dropped into the EFI shell. After removing the offending HD #3, Windows boots normally again.
I tried removing HD #2 and only attaching HD #3 together with SSD #1, but this yielded the same problem. Using SSD #1 by itself works fine though. Booting from a Linux live-cd works without problems. All disks and partitions are found and can be mounted. There, I erased the disk signature from the offending HD #3 and now Windows was able to boot and also found all disks and partitions correctly. But after a reboot the same problem reappeared
how do I disable message that come while booting s m a r t hard drive detect error!
View 3 Replies View RelatedKeyboard laptop writes wrong letters for wrong keys
View 2 Replies View RelatedSo I've decided that I want to use a Western Digital VelociRaptor 150GB for my Win 7 OS C-drive and my WD 500GB drive as my E-drive for files.
The problem is that I thought of this after installing it on the 500GB drive.
Will it be okay to reinstall on the new drive if I delete Win 7 on the old one?
If so, is it pretty simple to reformat a drive with an OS on it?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedOkay, I'm dual booting Windows 7 right now, as drive G: (Vista is C: ).
My problem is that installers like to use C: rather than G:, is there a setting somewhere where I can make my absolute main drive G:, rather than C:?
Some installers correctly use G:, while others (NSIS based, some others) use C: -- perhaps it's an installer issue, I don't know.
When I try to install Microsoft software, the installer extracts temporary files.. okay, but it extracts them to my external drive, and often they are not removed. How can I stop that from happening?
I installed Windows 7 X64 on my system where I first had a Vista installed on a 60GB partition on partition C of the first drive in the boot sequence. (two partitions C + D) And I have two other drives with only data H and P
When I installed Windows 7 I formatted the C partition and it installed flawless.
Then when I wanted to back an image, I found out that Windows 7 placed the bootmanager on the P drive. Removing the P drive an trying to fix it with the repair after booting from the DVD resulted in a message that this operating system was not supported. ?
After much searching I found that I could copy the bootmgr to the C drive.
Now my windows starts again as normal from the C drive. But I can see it is using some loader parts from the previously installed vista.
I would like to gave also this loader from Windows 7 but I cannot find how to get this done?
Is there anyone that has a clue?
I have a system which installed some boot files (i.e. Boot manager, Memory Tester and Windows Legacy OS loader) on the lowest numbered drive D: (the rest of course on C: which is the RAID partition where I want everything). I now know I should have disconnected the "D:" drive when I set the RAID up.
Anyone know of a sure-fire way of moving these files over without risk from D: to C: and then I can demote D: and remove the drive?
I installed windows 7 x64 RC a while back, and it detected windows xp and set up a dual boot. All was well.
I had a PSU failure, and i replaced the PSU. I set the BIOS to boot from the drive with windows 7 on it. It wouldn't boot. I set the bios to boot from the drive with windows Xp on it, and it booted to the dual boot screen.
Apparently, windows 7 placed the boot information on the old XP drive, so if i try to boot to windows 7 from the windows 7 drive, its a no go.
Now, this wouldnt' bug me so much, except that i want to replace the Xp drive with a larger 1tb drive. I don't need XP anymore, and do need storage (xp drive is 160gb). if i remove the XP drive, windows 7 won't boot. How can i fix this?
I have set up a Windows 7 machine that shares out a hard drive as a network share along with printers to our network. On another computer I was mapping the network drive and accidentally entered the wrong credentials (wrong user name) and choose the remember credentials setting, and it would not let me map the drive.
I tried to go back in and remap the drive again but Windows is remembering the user name/password and I can't map it. I can map the drive from any other computer just fine. Does anyone know how to make Windows forget the credentials so I can map the drive?
I have one more problem with my laptop this time . i have a Dell xps 15 , i re partitioned it and made my C drive of 141 GB . i installed all the required application and from the last few days i was watching the there is less space in my C drive than it should be there. i checked out the properties and found out that only 32.6 GB of disk space is utilized out of 141 so there should be around 108 GB free instead it shows me that only 92.9 gb is free .i cleared out the temp folder and there is nothing except 3-4 files which is of some Kbs . then where is the rest 15 GB gone ? is there a virus in my pc which is eating up the space ? i am really freaked out
i have a genuine windows 7 ultimate and microsoft security essential and it is updated and i scanned it and found nothing . btw there is something more , few hours ago there was 94.8 GB free , i installed a game in another drive and i removed it after 2-3 minutes coz i didn't liked it , so after un installing the game i saw there there was 93.4 GB left in my c drive again , i removed files from the temp folder but nothing happened and now there is just 92.9 gb left ! what is happening ! i am really freaked out now
FIX (with SavePart, tried other partition utilities and editing MountedDevices to no avail)
Hope this helps someone else with Wrong Drive Letter Problems
Installed Windows 7 RC and all was well with XP Dual Boot.
After some experimenting(BSD,LINUX,etc), Windows 7 would not boot, so popped in the DVD and let Windows 7 repair the boot.
Windows 7 now booted, but when booting XP on E: , it was now assigned the wrong Drive letter D: and would boot to just before the Logon Prompt and hang(same in safe mode.)
After much research and trial (including editing the HKLM/SYSTEM/MountedDevices hive of the XP install from within Windows 7 to change the drive letter) this was the fix.
This particular XP boots from Partition/Drive E: in Windows.0 directory (yeah, i know, been this way for years)
FIX: (FREE!)
downloaded SavePart "AKA Partition Saving " Partition Saving
Boot from a FreeDOS Floppy or USB stick and run SavePart.exe
within SavePart (navigate with TAB key, Selected items turn BLACK)
Choose:
Update Windows 2000/XP/Vista Registry
then
Choose element where boot configuration are stored (Disk number 0, in this case)
then
Choose element where boot configuration DATA are stored (Partition) where the XP(2000 or Vista) is located
then
Select the Directory where the XP (2000 or Vista) is located (Windows.0 on D Drive, in this case)
You then have access/ability to the change Drive Letters for that particular Windows Installation:
In this case:
Drive D (which needed to be E) and Drive E(which needed to be D)
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have noticed that a number of videos in my archive have disappeared. It is not a high percentage of the videos, just one here and there. Diagnostics show nothing wrong with the storage drive, nor anything else that I can think of. At first I thought it must have been due to me accidentally deleting a file, or not really having saved it as I thought that I had, but I now know that is not the case. I'm accustomed to what usually happens when a file becomes corrupted, it just becomes unusable, but still remains visible to the file manager and other programs, but I'm wondering if it might totally disappear?
View 9 Replies View RelatedI have a slight issue that I'm not sure how to fix. It's nothing serious but it's something I'd like to take care of.
Basically, I bought a new hard drive, made it the primary drive, and kept the old one in so I could transfer everything over to the new one and keep the old as my backup drive.
I installed Windows 7 but when I boot my machine without the disc in the drive it wont boot. I made my old drive the primary one again and I discovered that when I installed Windows 7 it put the boot information on the old hard drive instead of the new one.
Basically, I'm looking for an easy way to get it to boot from the new hard drive without having to use the old one as the primary. Any ideas?
Okay, I turn on my computer, and after four seconds it shuts off, then 4 seconds later, it shuts off, etc. Then after this process repeats itself for about 4 times, it will take a long time (~5-10 minutes) to show the computer manufacturer logo. Then after that,another ~2 minutes to show the Windows logo, then ~5 minutes to show the user account selection screen. I tried taking out the RAM, leaving one stick in, and then booting it up. It worked, so I am currently in the process of replacing the RAM (I now have 1GB instead of 2). But after a while, it got worse. I have no idea what to do know, and I really need this computer for work.
View 4 Replies View RelatedI am trying to boot windows server installed in external hard disk from my windows 7 pc but when I am trying to do so it my pc is flashing blue screen and my pc reboots with win 7.
View 3 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View Related
