Upgrading Hard Drive On A Solid State/Hard Drive System?
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
i am looking to build a new PC and will include a Corsair SSD.. need some information re TRIM support..Win7 I understand supports TRIM but do you need to install a program or is this already in Win7?
I have Windows 7 N Ultimate. I just bought Paragon Migrate. I tried to move os only to SSD. Although it has option of selecting other stuff to move, when i choose something, it doesn't get chosen and program just not choosing anything but OS. But this is not an issue. The issue is, when it gets to DOS after restart to finish moving os, at some point while it is moving, I get error message "Some Error occurred: Bad parameter of function". At the same time, at the top right corner it says Succeeded. When I try to boot from SSD I get strange error window saying "Windows failed to start 0xC0000034 Unexpected error.
I recently bought a SSD (Solid State Drive) it is a Samsung 64GB. My computer is an Asus with an i5 Processor.
Anyway I know the SSD works fine because currently I have Ubuntu downloaded on it, running just fine. For some reason however, Windows 7 is not detecting my drive. Under my computer, or upon booting from a disk, it will not detect it. The reason I am wanting to detect it, is because I would like to backup windows 7 onto my SSD and boot from there.
I am going to build a system (actually many of them) I would like to have two drives in this system. one a very fast reasonably large (100 gig) plus VERY fast solid state hard drive and the other a very fast and very large (10 or 2 Teri) mechanical drive. My question is how do I setup the prefetch or cache or whatever to run the operating system and my recent history of programs off of the solid state and have the mechanical drive there with everything on it in case I choose to something new into the recent history list by running some program once. also have oldest bumped off solid state, when space becomes an issue, but still keep it on mechanical hard drive. I think that this system will appear to run faster except the first time you run a program. I think this would be useful for instance on a system that plays the same online game everyday. Or works with the same complicated drawing in auto-cad for weeks. I have my own ideas about how to do this, but I thought I might throw this out there to what it sounds like when it hits the wall.
no place on any website can i find out if a intel ssd work in an amd gaming computer.
windows 7 ultma system mother board msi 890Fxa-GD70 amd phenom II x 6 3.2mhz 16 gig gskil ram
[code]....
i want to add as boot drive intel ssd will i have to reformat all drives to the new format/control and will the intel ssd work in system it does have usb 3.0 and sata 3 i actually have 5 of these systems and trying to finish up the last one.
I would like to completely wipe the hard drive of my Lenovo Thinkpad as the Best Buy geek squad really messed things up. I need to back up all of my data first and was wondering if there was any free options online? I have a 4GB jump drive I can use as well.As for wiping the laptops hard drive, what is the best way? Keep in mind that I want to have it completely restored to factory state. I don't want to do a simple reformat through a Windows 7 install
I'm looking to install a SSD drive for my windows 7 64bit custom rig I have. Currently I have everything on a 2tb internal HDD. I'm looking to keep everything the way it is and just place my windows on the new SSD.My first thought was unplug my HDD, install SSD install fresh Windows 7 on it, change boot up in bios to SSD first, plug HDD back in and delet windows off of it. Another thought was is it possible to install new SSD and move windows folders to it from HDD?My ultimate goal is to not have to reinstall all of my programs and to keep all my current settings.... I'm looking for the most painless and easiest set up of my new SSD drive and to just have windows on it.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I am upgrading my Hard Drive to an SSD and I was going to do a Clean install of Windows 7 but for some reason I can not find my Windows 7 CD including the case. I have the product key since it is in my computer but I just don't have the disk, What I should do.
I have a Dell inspiron 1545 with a pretty measly hard drive of 135gb. I have an old hard drive from another laptop which is 320gb and i'm wanting to upgrade. I have done this before but i just used all the installation disks to reinstall windows and everything onto the new hard drive. This time however, i want to be able to copy the whole contents of my current hard drive onto the new one so that when i swap them over and i boot up the computer it contains the operating system, software and files that are currently on the 135gb hard drive. I presume there is some sort of wires, software and housing that i might need to achieve this. So far i have been pointed in the direction of this software pack (Apricorn EZ Upgrade Universal Hard Drive Upgrade Kit (SATA and PATA 2.5" Notebook Drives) Deals, #EZ-UP-UNIVERSAL - Expansys.com UK) but i was wondering if there was a cheaper way to perform the required task.
I was also wondering if the new hard drive will affect battery life. The new one spins at 7200rpm compared to the old at 5400rpm.
i have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
My primary system drive where Windows 7 is installed is a: WD 7K 16M SATA2 WD3200AAKS HD 320G - OEM. Long version (feel free to scroll down to short version): Yesterday, I came back to my computer, and all of my applications and desktop were frozen, but I could move the mouse. When I clicked on a window, the cursor would turn to the blue spinning thing, and the window would eventually say not responding and turn a lighter shade of white. I couldn't click on the desktop of the start menu, so I did a hard reset. The computer then wouldn't pass the black "starting windows" screen. I did another hard reset, and it asked me if I wanted windows to try to repair start up. Soon after that, it asked if I wanted to restore windows, but when I clicked OK, I got what looked to me to be a memory error. Then startup repair seemed to do nothing for a few hours, till I got impatient and restarted the computer. I was able to get into Windows, and I scheduled a memory test, and reset the computer. Memory test ran and found no problems. I restarted and Windows loaded, but soon after my computer was laggy and the programs were freezing. So then I thought it may be a HDD issue, so I scheduled to run check disk on that drive, and reset. Check Disk found corrupt files and bad sectors. After that, I was able to load Windows normally, but when I tried to open MC7 for "Live TV", it wouldn't pass the searching for tuner stage, so I closed out MC7, and got an error message in the action center. So I ran chkdsk again. This time, windows wouldn't load after restart, so I went back into repair startup, and it seemed to have found the error really fast, restarted and everything seemed fine. I decided to run chkdsk one more time for good measure, and it had a couple more read errors and found more bad sectors. Now I have been running windows with no apparent issues yet.Short version, computer froze, ended up running chkdsk 3 times, had to repair start up, and now everything is OK for now, but obviously I'm worried about more harddrive failure. Here are my questions:
1)How troubling is this? Do I need a new harddrive ASAP, or can it run for years with a few bad sectors? Any further tests I could run?
2)If I am to get a new system drive, what should I get? All I have on it is windows and my programs. I have separate disks for data. I'm using roughly 32 GBs out of 298. Should I just try to get the same drive (same speed, same capacity), or is there a good upgrade and is it worth getting an upgrade (I don't need more space, but something that would help performance maybe?) or any good deals on sale now?
3) I bought my current (failing) HDD on 9/24/2008, and I'm pretty sure WD has 5 year limited warranty. Should I peruse that angle?
4)How should I got about moving/restoring this OS to the new drive?
4a) I have a half dozen Windows Image Backups saved. Should I just use an old one from before the failure, or should I try to create a new one now, even though the disk may be corrupt?
4b)Or is there a better program to be using than Windows backup and restore?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
im looking to get new harddrive and was wondering isit possible to copy whole os to new hdd?
meaning like copy whole os to new hdd so i dont have to reinstall all my programs because im going to use my current hdd as external storage using caddy and my new hdd as my sole drive
ive been told theres some program called ghost something that does it,,is this true or even possible
Assuming the hard drive for my last (XP) system wasn't the part that failed, I'd like to find some way to use it in my new computer. The old hard drive has an expensive program on it that I need for work, and the program either won't work at all or wont work without an upgrade according to the supplier when I asked why I can't run the program using Windows 7. Is it possible to install it in the new case and run the XP based programs?
I am a photographer and I am always growing my storage. I have 8 slots in my computer, and I basically want to fill it up with extra HDs. I already have my OS setup finished. But I have random hard drives lying around. I would like to set them up as one drive with a parity... and then replace them as I get bigger better hard drives. Can someone point me in the right way?
I currently have windows vista 32 bit on my hard drive. I want to upgrade to windows 7 ultimate, but don't want to format this HD just yet.
Is there a way to load windows 7 onto this hard drive then have that portion of the HD boot up in windows 7? That way I can run windows 7 and still have my windows vista and all my files on the same hard drive.
If windows 7 works out, can I delete that windows vista portion and copy the files into the Windows 7 portion?
I came into the possession of a new HP computer, the hard drive has no operating system on it. Is there any way of putting windows XP or Vista on this system without going out and buying them. Are there any operating systems online that can be downloaded?
My hard drive is slowing down the preformace of my computer. The hard drive gets a 5.9 rating in windows 7 performance ratings. I would like to switch out to a newer hard drive possibly Western Digital Caviar Black 1TB WD1002FAEX. I do have an external backup drive
So, i woke up the other day to see my Windows 7 computer is now completely screwed up that i am on right now..C drive is Mirror RAIDed to let you know.It is reporting 74.1MB free of 465GB total on the drive.No matter what i delete, it does NOT EVER free up space.As a matter of fact, some files delete, then come right back, files i've added myself.. weird #1Two, i run chkdsk in windows, it says C drive is a RAW drive and cant scan however it boots up fine to it every time. weird #2So i then use windows repair command prompt to chkdsk /F /R It sees it's NTFS JUST FINE..but reports ZERO errors.. weird #3I scan using Intel Matrix Storage Console in windows, NO ERRORS, weird #4But i am getting Disk I/O errors like crazy in windows logs and in programs, etc.. weird #5I selected all files on Disk C- total space in use under 300gb, but showing 465GB in use.. weird #6Scanned for infections with AVG, no errors, i tried malwarebytes, will not open- 0xc000005. weird #7So i have a drive that can't be read but is read but reporting wrong size but measures right size that has no errors but has errors.
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
I am not very good with computers, so I don't really know how to do this, and need explanation in simple english. My hard drive is constantly causing BSODs on my HP laptop (Windows 7) and I have ordered a new hard drive. I am not quite sure how to transfer the operating system.
and i got problem with my brothers WD external hard drive, it's not recognized in my computer, my brother says "it lost the drive letter or may be some files broken" he had some knowledge about that but we can't fix that one.
