I am not very good with computers, so I don't really know how to do this, and need explanation in simple english. My hard drive is constantly causing BSODs on my HP laptop (Windows 7) and I have ordered a new hard drive. I am not quite sure how to transfer the operating system.
View 5 RepliesI currently have windows vista 32 bit on my hard drive. I want to upgrade to windows 7 ultimate, but don't want to format this HD just yet.
Is there a way to load windows 7 onto this hard drive then have that portion of the HD boot up in windows 7? That way I can run windows 7 and still have my windows vista and all my files on the same hard drive.
If windows 7 works out, can I delete that windows vista portion and copy the files into the Windows 7 portion?
I came into the possession of a new HP computer, the hard drive has no operating system on it. Is there any way of putting windows XP or Vista on this system without going out and buying them. Are there any operating systems online that can be downloaded?
View 3 Replies View RelatedMy hard drive is slowing down the preformace of my computer. The hard drive gets a 5.9 rating in windows 7 performance ratings. I would like to switch out to a newer hard drive possibly Western Digital Caviar Black 1TB WD1002FAEX. I do have an external backup drive
View 4 Replies View Relatedi cant install operating system on hard drive because hard drive is change to dynamic suggest tome to change dynamic into logical
View 4 Replies View RelatedI want to install a new hard drive on my laptop. How can I keep the windows 7 operating system that is now installed on the current hard drive?
View 2 Replies View Relatedwhen you turn it on it flashes the vaio logo then goes to a black screen that says "operating system not found". i googled the problem and my instincts were correct it was a damaged hard drive there is even a Internet video as the first link when you google it and it shows his laptop go figure.
View 10 Replies View RelatedSo yesterday I was online and uploaded a pic to Twitpic. Everything froze up so after a bit I decided to restart. When it restarted it went right into system repair. I let that run ALL NIGHT LONG. In the morning, it asked if I wanted to do a system restore and I said yes. But it said I had no restore points. I knew that wasn't right so I ran through the memory check option and then the hard drive check and was told memory was fine but now I don't have a hard drive found or an operating system. Any clue what has happened or how to restore everything?
View 9 Replies View RelatedI have a hard drive I recovered from my old Dell laptop when the motherboard gave out. Originally, I just put it in an external hard case and have been using it as external storage. Now it is getting filled up, so I would like to reformat it to remove the OS partition (Vista) to give me access to the entire drive. I have removed and baked up all my files, but cannot find a way to repartition the drive to remove the OS volume. Disk manager will not let me access that volume to delete it - nor will diskpart. In fact, only the non-OS volume even shows up with a drive letter in diskpart.
I have searched the web but have only been able to find info on how to reformat the main hard drive...and this is definitely NOT what I want to do.
is there an easy way to reboot into a different operating system thats on a different harddrive from the desktop?
View 4 Replies View RelatedIn my current system I have a HDD and no SSD and the HDD has the OS installed onto it. In the next month or so I will be completing my second build. this system will have SSD and HDD. My question is... is there any possible way for me to take my OS from my HDD and put it on my SDD or will I have to buy another OS and install it on my SDD and uninstall it from my HDD?
View 6 Replies View RelatedI have two hard drives, one is SATA 500gb and the other is IDE 150gb. I had Windows 7 on the SATA and an old Ubuntu on the IDE hard drive. I hardly ever used Ubuntu and got tired of GRUB coming up every time I booted asking which OS I want so I decided to uninstall it. I wanted to go ahead and reformat the drive so I used an old Windows XP cd I have to reformat the 150g IDE drive. It wouldn't let me just reformat without installing XP so I went ahead and did that.So now whenever I turn on the PC it automatically boots into Windows XP. In XP I can see both drives, my 500gb with all my files and Windows 7 and the 150gb with just XP on it. In my BIOS the SATA 500gb is set as the main hdd, and is set as #1 in the boot priority (IDE hdd is not anywhere in boot priority). When I bring up the boot list and choose the SATA HDD it just brings up a BIOS flasher, no Windows 7.
View 4 Replies View RelatedI have a hard drive with Windows 7 and lots of data on it (it's my current computer). I'm upgrading to a different motherboard and would like to know what I should do software/driver wise to prepare for the HDD transfer... Should I uninstall all the drivers so Windows 7 can detect all the new hardware from the new motherboard?
View 5 Replies View RelatedI recently purchased a new notebook which has Windows 7 HP on it. Because of all the bloatware put on it by the mfg and since I have a spare hard drive I wish to do a clean install of Windows. Since I do not have the drivers anywhere but on the original HD, I need to transfer them to the new HD. I tried using DriverMax and found it to be very unsatisfactory. What are the other options?
View 7 Replies View RelatedBasically I bought an SSD to put Windows 7 on along with some of my most used applications. However, I want to some how put my users folder and program files folder onto my 500GB HD. Ive tried multiple times to mess with the registry settings but it doesnt seem to work..? Ive also tried an application but that just meant when I restarted my PC it diddnt recognise my user account meaning I couldnt log in at all forcing me to reinstall again. I basically want only OS & a coupel of aps on SSD while having my desktop/users/prorgam files on my 500gb.
View 2 Replies View RelatedI'm about to get a 2 terabyte external hard drive and I would like to move all my user installed programs to it without uninstalling them and reinstalling to the new drive. My question is....1. Is it safe to drag and drop the program files from C: to the new drive, and 2. If it's not a good idea to perform a drag and drop is there another option?
View 4 Replies View RelatedI have installed a new ssd (240GB) into my computer. Everything is currently on a 500GB HDD and I want to transfer all of it (including the op system) to the SSD.
How do I do this and ensure the computer boots from the SSD?
I made the mistake of putting W7 on a small partition of the 160GB D drive. I was not aware that much of windows 7 programing would not allow me to change the destination to install and insists on installing on the OS drive. I am looking for a way to copy, move or coerce all of the current system onto another drive without erasing that drive.
View 13 Replies View RelatedIt starts up saying no operating system then as we delved deeper tried a windows 7 disc and it ended up in dos and found out that it came up as x: drive I assume this is the recovery partition on the drive but tried changing to c: drive not found . The c: drive just seams to of disappeared. Is the hard drive knackered .
View 1 Replies View RelatedI have a 1tb HD and I want to partition it to install another operating system. There is no "unallocated space". How do I go about making my partition?
View 8 Replies View RelatedMy problem is simple. I had 4 HD's in my Computer 2* 500G in Raid as an operating system and 2*1tb drives for storage. Everything was working fine but the OS needed a formatt and refresh basicaally.o to take advantage of this and free up 1TB of space I bought a 64G SSD, physically installed it and went about setting up this as my OS from scratch. However, in my haste I forgot to remove a couple fo folders of important documents from the old OS drives.The SSD is the Boot drive now and I can see all other HD's in my computer, but the problem is I can not gain access to, lets call it H:, which was the old OS drive. I have been able to initiallise one of the old OS raid drives through disk management, but am unable to gain access to H.
It tells me I need to Formatt the drive first, and then comes up with a speil about access being denied. I gather this has to do with the old OS being installed on it, I am happy to formatt the drive enventually. But I really need to get some docs off it first.Is there anyway to do this, I have been searching for an answer but not getting anywhere?I tried to change the boot order also, as all other system specs remain the same. But I think because I have removed the Raid set up of the drives I am unable t load the old OS
can i install windows 7 to my neo edge z1283 using a flash drive?
View 4 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedWe have two disks in raid 0. We want to get rid of them, as they are failing and install a single hard drive with Windows 7. We currently have Vista installed. There are no files I need to copy, just want to start with a fresh operating system. How do I go about this? Can I just remove the old hard drives and replace with the single hard drive and install Windows 7 on it, or is it more complicated than that?
View 8 Replies View RelatedI recently bought a DIY computer package from Tigerdirect. I put all the parts together, making sure to handle the parts correctly. Once everything was hooked-up, hardware-wise, I tried to install Windows 7 off of a friend's USB drive. It almost worked, but it requested that I insert a disk into the drive, which I couldn't do.I bought a brand new Windows 7 OEM version. Computer still won't boot-up, even though BIOS screen shows that the optical drive is connected. After checking the boot order sequence several times, I figured that the driver must have something wrong with it, so I bought a cheap DVDROM. Both optical drives are made by LG (not sure if relevant) but neither work. In fact, neither one would even spin-up the disk. Message on screen reads: 'Reboot and Select proper boot device, or insert boot media into boot device and press any key.'
View 1 Replies View RelatedToday, when I turned on my computer, i saw this message:"Hard Drive SELF MONITORING SYSTEM has reported that a parameter has exceeded its normal operating range. Dell recommends that you back up your data regularly. A parameter out of range may or may not indicate a potential hard drive problem".
View 7 Replies View RelatedI'm working on a computer with a RAID setup. It is 2 hard drives 500gb each showing up as 1tb in windows. Both drives show up in the bios but all of a sudden when trying ot start the computer I get a "Operating system is missing" error.
I'm trying to run a chkdsk form a win 7 64 bit disk and telling it to run on H; (system drive) but it says 'cannot open volume for direct access'.
The other drive, C: is just a recovery drive built into dell computer systems. I tried using a boot cd and running mbrfix to no avail.
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies View Relatedi have a (spinning) hard-drive with my windows 7system and data on it. it is up to date to this month. the hard-drive is a 320gb. there is jsut 69gb used on the 320gb.i just bought a 256 gb SSD (solid state HD). i would like to place everything on the 256 and put IT in my laptop. i have saved a system image of the 320gb on DVD. windows seems to want an exact size (320gb) to restore the system to.
View 10 Replies View RelatedRan F12 to regain Operating system - long version. Says computer passes everything but there's no operating system found. Did this Twice. Tried "Operating System" CD that came w/ Studio 17 laptop. Hit option to run via CD & never got anywhere after an hour. Tried Reinstall Hardware disk that came w/ laptop. It shows Vista, but laptop came w/ Windows 7. See where it shows the system's checking things out, but never get anywhere.
View 7 Replies View RelatedMy primary system drive where Windows 7 is installed is a: WD 7K 16M SATA2 WD3200AAKS HD 320G - OEM. Long version (feel free to scroll down to short version): Yesterday, I came back to my computer, and all of my applications and desktop were frozen, but I could move the mouse. When I clicked on a window, the cursor would turn to the blue spinning thing, and the window would eventually say not responding and turn a lighter shade of white. I couldn't click on the desktop of the start menu, so I did a hard reset. The computer then wouldn't pass the black "starting windows" screen. I did another hard reset, and it asked me if I wanted windows to try to repair start up. Soon after that, it asked if I wanted to restore windows, but when I clicked OK, I got what looked to me to be a memory error. Then startup repair seemed to do nothing for a few hours, till I got impatient and restarted the computer. I was able to get into Windows, and I scheduled a memory test, and reset the computer. Memory test ran and found no problems. I restarted and Windows loaded, but soon after my computer was laggy and the programs were freezing. So then I thought it may be a HDD issue, so I scheduled to run check disk on that drive, and reset. Check Disk found corrupt files and bad sectors. After that, I was able to load Windows normally, but when I tried to open MC7 for "Live TV", it wouldn't pass the searching for tuner stage, so I closed out MC7, and got an error message in the action center. So I ran chkdsk again. This time, windows wouldn't load after restart, so I went back into repair startup, and it seemed to have found the error really fast, restarted and everything seemed fine. I decided to run chkdsk one more time for good measure, and it had a couple more read errors and found more bad sectors. Now I have been running windows with no apparent issues yet.Short version, computer froze, ended up running chkdsk 3 times, had to repair start up, and now everything is OK for now, but obviously I'm worried about more harddrive failure. Here are my questions:
1)How troubling is this? Do I need a new harddrive ASAP, or can it run for years with a few bad sectors? Any further tests I could run?
2)If I am to get a new system drive, what should I get? All I have on it is windows and my programs. I have separate disks for data. I'm using roughly 32 GBs out of 298. Should I just try to get the same drive (same speed, same capacity), or is there a good upgrade and is it worth getting an upgrade (I don't need more space, but something that would help performance maybe?) or any good deals on sale now?
3) I bought my current (failing) HDD on 9/24/2008, and I'm pretty sure WD has 5 year limited warranty. Should I peruse that angle?
4)How should I got about moving/restoring this OS to the new drive?
4a) I have a half dozen Windows Image Backups saved. Should I just use an old one from before the failure, or should I try to create a new one now, even though the disk may be corrupt?
4b)Or is there a better program to be using than Windows backup and restore?