I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 RepliesI was wondering if there was anyway to clone or backup a Mac Hard drive from a Windows 7 machine. My friend's Mac got destroyed but managed to save the harddrive and left it with me to back up while he went on vacation.
Unfortunately I've never touched a Mac before and I'm assuming it won't even read the drive if I plug it into my PC since it uses HFS+.
I have with me the following things
- A Windows 7 PC and a Hard Drive Dock
- The 250GB HD from the broken Mac
- A Blank 256GB SSD that he wants to use.
Is there any software on Windows that will let me clone/backup the drive or read from it
cloning a hard drive with operating system and all.
Details: I have a couple of tablet pc's (Motion LE1700). One is in perfect shape (1), the other (2) has a physical problem with the USB ports. I have installed and configured W7 on 1. I can't do the same on 2 because I can't connect to it. I would like to make a copy of the hard drive on 1, take the hard drive out, replace it with 2's HD, copy that back, and then replace both drives.
What program do I use to clone the drive, what steps should I take, what should I look out for? The drives are 64G SSD's and I have a 500G external USB HD for the transferring. I don't want to just reinstall everything because it's a PITA, I want to copy the good drive to the other one.
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
View 9 Replies View Relatedwhat I am trying to do is sort of complicated but I'll try my best to explain it. Basically I'm trying to squeeze every ounce of potential out of my nearly outdated machine.
First, my relevant system specs:
- Windows 7 Pro 64bit
- 2 IDE Hard drives - 5400rpm 80GB Maxtor, and 7200rpm 160GB Seagate
- 2 Gigs of generic grade RAM
OK so earlier today I found out about virtual memory, AKA a paging file, and about how it acts like a sort of RAM buffer, increasing performance. I also found out that I can put a paging file on each hard drive and that I could get the greatest benefit if I had each hard drive on a separate IDE channel, so I ripped open my case, rerouted the cables appropriately, changed the master/slave jumpers, reset CMOS, and booted up Windows 7.
Now here is where I make things more complicated . In the interest of getting every drop of juice out of this rotten orange, I want to move (clone) the entire Windows 7 partition from the Maxtor to the Seagate to take advantage of the extra RPMs. Except when I attempt the cloning process via Seagate Disc Wizard, I only get the option to clone the Windows 7 partition and not the reserved unallocated space used by Windows Recovery Environment.
I am unaware of how Windows 7 uses the reserved space specifically, but I assume that if I just created the unallocated space later it wouldn't instantly restore WinRE functionality. I know enough to know it has to be more complicated than that. How would I clone the Windows 7 partition and retain WinRE functionality?
Then, after that's done, do I still have to allocate some space on each hard drive for the paging files, like a Linux swap file? Or is the virtual memory reserved literally as a file in the operating system partition?
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI image Win 7 to acronis and wondered if I could restore an image to a new hard drive from the exterior hard drive?
View 6 Replies View RelatedMy windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
View 12 Replies View RelatedHow do I properly configure a new HD for an HP using HPs SYSTEM partition and FACTORY_IMAGE Partition.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
At the moment, my Gateway M-Series laptop which has Windows 7 32bit will not do a system restore! It says my local disc ( C: ) has errors, it cannot check these errors so that I can restore the computer
My computer doesn't want to connect to the Internet also (lucky for me I have other means of accessing the Internet) and every time I open Chrome or any of my software it says there are corrupted files and the disk check will not run because there are corrupted program files? I haven't downloaded anything of late I keep a fairly clean hard drive, but when I went into system restore it set one of the restore points as 'DirectX Installed' which incidentally I haven't installed and isn't in any programs list.
After some tweaking I found I was able to check the disk and restore the computer but I would still like to know if any of you have any input on how to avoid future problems!!
I have to format hard drive, after format an I get back my window 7 operating files by a recover software
View 2 Replies View RelatedI'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?
View 8 Replies View RelatedI'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.
View 3 Replies View RelatedI was wondering if this would work as a poor man's backup system for Windows 7.
1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).
2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.
Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??
I've uninstalled Nitro PDF professional after it expired and reinstall it to register but this message appears: "Multiple restore hard drive operations damaged the license and the product must be re-registered #2".
View 9 Replies View Relatedi have a acer aspire one netbook. it wont load. they told me to restore to original . they said its installed on my hard drive.
View 3 Replies View RelatedI have a failing hard drive on my laptop, when i proceed to buy a new one, what do i need to do to get windows 7 onto the new hard drive? can i do that with system restore or back up software?
View 2 Replies View Relatedmy desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies View RelatedHow can I restore Programme Folder I accidentally deleted from hard drive in Windows 7.
View 3 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Related