Configure New Hard Drive For HP Restore?

Oct 9, 2012

How do I properly configure a new HD for an HP using HPs SYSTEM partition and FACTORY_IMAGE Partition.

View 1 Replies


ADVERTISEMENT

Clone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?

Nov 14, 2012

I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.

View 3 Replies View Related

Restore To New Hard Drive

Oct 8, 2012

I image Win 7 to acronis and wondered if I could restore an image to a new hard drive from the exterior hard drive?

View 6 Replies View Related

Restore From An External Hard Drive?

Aug 1, 2012

My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.

View 12 Replies View Related

Cannot Restore Hard Drive Because Of Corrupted Files

Feb 13, 2012

At the moment, my Gateway M-Series laptop which has Windows 7 32bit will not do a system restore! It says my local disc ( C: ) has errors, it cannot check these errors so that I can restore the computer

My computer doesn't want to connect to the Internet also (lucky for me I have other means of accessing the Internet) and every time I open Chrome or any of my software it says there are corrupted files and the disk check will not run because there are corrupted program files? I haven't downloaded anything of late I keep a fairly clean hard drive, but when I went into system restore it set one of the restore points as 'DirectX Installed' which incidentally I haven't installed and isn't in any programs list.

After some tweaking I found I was able to check the disk and restore the computer but I would still like to know if any of you have any input on how to avoid future problems!!

View 2 Replies View Related

How To Restore Windows 7 After Format Hard Drive

Sep 18, 2012

I have to format hard drive, after format an I get back my window 7 operating files by a recover software

View 2 Replies View Related

Can't Access Secondary Hard Drive After Restore From Backup

Feb 2, 2011

I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?

View 8 Replies View Related

Can't Access Secondary Hard Drive After Restore From Backup

Feb 2, 2011

I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.

View 3 Replies View Related

Windows 7 Backup And Restore From Hard Drive With C And E Partition

Jul 24, 2012

I was wondering if this would work as a poor man's backup system for Windows 7.

1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).

2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.

Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??

View 2 Replies View Related

Multiple Restore Hard Drive Operations Damaged License

Jan 25, 2012

I've uninstalled Nitro PDF professional after it expired and reinstall it to register but this message appears: "Multiple restore hard drive operations damaged the license and the product must be re-registered #2".

View 9 Replies View Related

Restore Windows 7 When Its In Hard Drive On Aq Acer Aspire 0ne D650

Mar 29, 2012

i have a acer aspire one netbook. it wont load. they told me to restore to original . they said its installed on my hard drive.

View 3 Replies View Related

Failing Hard Drive On Laptop / System Restore Or Back Up Software?

Mar 30, 2011

I have a failing hard drive on my laptop, when i proceed to buy a new one, what do i need to do to get windows 7 onto the new hard drive? can i do that with system restore or back up software?

View 2 Replies View Related

Desktop Computer Won't Boot / System Restore On The Hard Drive When It Is Set As An External?

Mar 28, 2012

my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.

View 2 Replies View Related

Restore Programme Folder Accidentally Deleted From Hard Drive In Windows 7?

Nov 29, 2012

How can I restore Programme Folder I accidentally deleted from hard drive in Windows 7.

View 3 Replies View Related

White Screen Reboot Loop / Hard Drive Not Found In System Restore

Oct 9, 2012

When I start my laptop, it shows the HP logo, begins to boot and is almost instantly interrupted by a white screen that scrolls down from the top. It reboots right after the white screen.I am able at the HP logo screen able to navigate to System Restore and that is where I run into my next problem.When the System Restore window opens for confirmation it shows that "Local Disk (C) (System)" status: "Ready to restore" and the check-box next to it is checked.The next line has a empty check-box for "Local Disk (C)" with the status: "The drive cannot be found." I can also successfully boot into Safe Mode with Networking. I can access all my files. Which leads me to believe that it is a hardware problem. Possibly the motherboard or graphics card.

View 7 Replies View Related

Way To Configure Windows Backup To C Drive Only?

May 26, 2011

I have my C drive, another internal drive and 2 exterior drives. I have used Cobian backup for several years to backup documents daily. Just started using Win 7 recently and decided to use its backup for system files in case my C drive fails. My second external is new and it is 500gig. After the backup it only has 154gig remaining. Is there any way to stop it from backing up the other 2 drives? This is probably very simple, but i did google it and didn't find anything.

View 6 Replies View Related

How To Configure RAID-0 On 2 Partitions / 1 Part Is On Boot Drive

Mar 5, 2012

I have 2 SSDs each partitioned into 80GB and 40GB like this:

-Drive1-80GB (boot) and Drive1-40GB
-Drive2-80GB and Drive2-40GB

Drive1-80GB is already the Windows 7-64 boot partition for the system. Can I configure a software RAID-0 with Drive1-40GB and Drive2-40GB? I know this is unorthodox but I wanted to try this for a few reasons.

View 4 Replies View Related

Upgrading Hard Drive On A Solid State/Hard Drive System?

Oct 25, 2011

So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet? 

View 9 Replies View Related

Computer Is Not Booting Hard Drive/Unresponsive Hard Drive?

Jun 16, 2011

I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.

View 2 Replies View Related

Make Internal Hard Drive Into And External Hard Drive?

Mar 30, 2012

I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable

View 3 Replies View Related

Internal Hard Drive Acting Like An External Hard Drive?

Mar 4, 2010

Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?

View 6 Replies View Related

Transfer Files From Bad Sata Hard Drive To New Hard Drive?

Dec 24, 2011

I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?

View 4 Replies View Related

Software To Transfer Files From One Hard Drive To Another Hard Drive?

Jan 21, 2013

I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.

View 1 Replies View Related

Install Vista On One Hard Drive, Win 7 On Hard Drive 2

Nov 16, 2009

I have Vista installed on my Hard Drive, 250 GB.

But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.

Is that possible, to have both separately?

View 3 Replies View Related

Hard-drives Apparently Corrupted After Attempted To Install A Second Hard Drive?

Oct 8, 2011

make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?

View 5 Replies View Related

Factory Restore With Two Hard Drives?

Apr 24, 2012

I am planning to do a factory restore on my computer (Windows 7 Home Premium 64) since its been acting really slow with errors/spyware I cant get rid of. I was wondering the steps I would take towards doing this, and I have a quick question.I have a separate hard drive (Audio (G: ) which I use to record music, Im also using it to hold all the files that I want to transfer once I restore my computer. My question is when I factory restore my computer is it going to wipe my (G: ) drive as well? I just wanted to make sure since I have priceless data recorded on that drive.

View 4 Replies View Related

.VHD File Copied From Bad 1.5 TB Drive, Can Restore To 1TB Drive

Sep 20, 2012

I was lucky to grab a recent image backup from a failing 1.5 TB drive. Can I restore it to a smaller drive if the available space on the original drive was well below 1TB?This is the first time ive had to work with this particular image file. I have restored from backups before, just not this type of image.

View 9 Replies View Related

Restore A Two Drive System Image Onto One Drive?

Oct 13, 2012

My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.

For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?

Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?

View 1 Replies View Related

Recover Lost File After Hard Disk Restore/crash?

Mar 16, 2012

Had a power failure during a recovery of an Acronis backup on my C: drive. It seems it happened while Acronis just started loading the backup files? When I restarted the Samsung Laptop local drive C: did not appear in Explorer. Only drive D: and my DVD drive E: appeared (C an D are partitions on the same hard disk). The recovery software was on a hidden partition but when trying to use the Samsung Recovery facility it say Drive C: not found.After trying out suggestions found on the internet I only managed to screw everything up resulting in also loosing the D: drive containing my Acronis backup. The laptop did not start at all. I at last managed to get it going after installing Windows 7 again and I then sit with only C System Disk, D System reserved and E: DVD drive at that point.Foolishly I shrinked the system disk C and created a data disk. That disk is now Data Disk F. and not D as original.The Acronis backup containing all my files and data was on the original Data Disk D:I have used various free software to try and find that specific file. But they all search by drive and the missing file must be somewhere on the disk either as lost or wrong drive letter or something.

View 4 Replies View Related

Restore Default Security Permissions For The Hard Disk Partitions?

Jul 12, 2010

I have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64

View 8 Replies View Related

System Restore Will Not Create A Restore Point Or Restore To A Previous Date & Time

Apr 10, 2012

System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved