Restore Default Security Permissions For The Hard Disk Partitions?
Jul 12, 2010
I have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64
i have a folder on my external drive with lots of subfolders and files inside ful of work i need to get at. but for some reason all of the permissions on that folder and its subfiles are denying me access. i can see the files and folders but i cannot open the files. i can go into every folder but again i just cannot to open any file.
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
What software or way to format the hard drive data, making it safe to delete data no recovery possible. Such as DBAN, but erased too long. I tested a 160G hard disk data erase, with six hours or so
i have a hard drive, but the problem is, my little brother set up a password on it.. i think he messed with the bios, and he forgot the password he set, and i got all my important data in it.. i tried to remove the hard disk and try to access it from another computer, but the hard disk is still protected by the password, and i reset the BIOS but password rested
My acer laptop using windows 7 will not startup. When I start laptop it start running. While window black screen is running a blur box window comes up stating hard disk security in this screen it state it is locked. The only way to get out of this screen is to hit esc the only thing working is the F2 I can use this change settings what ever. However, none of the F12 recovery will complete.
I am sure this has been answered in the past butI cannot find any links when I search!
I left my pc to boot up and it started into a check disc mode and all I get is the above message. I cannot reboot in safemode to restore, what can I do?
Had a power failure during a recovery of an Acronis backup on my C: drive. It seems it happened while Acronis just started loading the backup files? When I restarted the Samsung Laptop local drive C: did not appear in Explorer. Only drive D: and my DVD drive E: appeared (C an D are partitions on the same hard disk). The recovery software was on a hidden partition but when trying to use the Samsung Recovery facility it say Drive C: not found.After trying out suggestions found on the internet I only managed to screw everything up resulting in also loosing the D: drive containing my Acronis backup. The laptop did not start at all. I at last managed to get it going after installing Windows 7 again and I then sit with only C System Disk, D System reserved and E: DVD drive at that point.Foolishly I shrinked the system disk C and created a data disk. That disk is now Data Disk F. and not D as original.The Acronis backup containing all my files and data was on the original Data Disk D:I have used various free software to try and find that specific file. But they all search by drive and the missing file must be somewhere on the disk either as lost or wrong drive letter or something.
i've been having problems with folders sometimes i can't delete them saying i don't have permission when i'm the admin.i did some research and used a program lockhunter to see what is locking the folder and it came up with svchost. it wouldn't unlock it though.it seems that security permissions is messed up some how and i can't figure out how to fix it.
I just set permissions so that certain drives are not available to non-admin users. Now me, the administrator cannot get into the drive. Furthermore the security tab on the properties window is gone.
I had to change the owner and permissions of the C:Windows folder in order to install a particular software. When I changed these settings, I had the "Replace owner on subcontainers and objects" box checked.I figure its safe to say I made a mistake. Does anyone know how to return all ownership and permissions to default values without doing a full install of the OS? I tried creating a recovery disc and running a repair, but it didn't fix the issue.I also have no image to restore to.
on my root folder under apache web server, i give the permisseion to the computer name only. so now no one including me or the admin can open the folder! and i got (forbedden access) when trying to access localhost or my webpage under apache.is there any way to restore previous permissions ?
HP Compaq Presario CQ57, Windows 7 Home Premium SP-1 64 bit A month ago I bought an HP Compaq Presario CQ57 notebook (laptop), which comes installed with 2 x 1GB RAM modules. It functioned fine. A couple of weeks ago, I upgraded the RAM by replacing one of the 1GB modules with a 4GB one. When I restarted Windows, yes, it did blue screen momentarily, but recovered with another start and then things went well for a week.Then, upon attempting to reboot, it failed. On the Windows Welcome screen, it flickers briefly before it fails and goes to a blue screen.Using the HP Recovery Console, after trying a recovery that didn�t work, I tried the option of restoring to factory condition. Then, it still produced blue screens, giving error messages like IRQL less than equal and Page fault in non-page area.
I replaced the new RAM with the original 2 x 1GB RAM and tried a restore to factory condition option again. This time it worked. However, the hard drive partitions are odd.Disc Management As you can see, Disk 0 is divided into System 199 MB, C 75GB, not labled 133.34 GB, Recovery D 19.38, HP TOOLS E 3.97 GB.Ignore the CD ROM below.Isn�t System supposed to be on C? And the 133.34 GB unallocated space isn�t supposed to be there either.I ran the restore to factory again and it produced the same disk partitioning. I consulted HP customer service, and they sent me a Windows disk and wants me to try restoring from that rather than from the Recovery provided on the hard drive.
Created an image of my C drive and System Reserved with Macrium. I want to change my partitions prior to restoring my image. Is the easiest to just use my Windows 7 disk?Have a 500GB hard drive on my laptop and want to change the partition sizes.
My new computer came with one c: partition. I want to shrink it and use the avaialble space to set up a second partition which I want to format as vfat.
I've done this before with a machine running vista. I found something under partitioning a disk, which had me link to computer management. I think I see what to do, but I can't find computer management anywhere else. Is it one of several hidden programs available through the control panel? Is there some other way to bring it up?
I will be upgrading form windows xp to windows 7 soon. I know there is no direct upgrade option from xp and that I will have to perform a clean install. I have created a couple of True Crypt disk partitions to store private data. Will those partitions be erased after the install or will they remain? Also, can I create another new disk partition to store the data I want to transfer over to windows 7 or will that be erased durring the install as well? I want to know if I need to go and get an external HD.
I'm a recovering victim of the "C: is not accessible" bug.
I recently found this which uses cmd to edit security settings:
Sample command to reset security settings:-
The steps below do not apply to Windows XP Home Edition, or Windows Vista Home Basic and Home Premium editions. To restore security setting for Home editions, either use the Microsoft Fix, System Restore or a backup.Note After security settings are applied, you cannot undo the changes without restoring from a backup.
If you are uncertain about how to restore your security settings to the default settings, you must make a complete backup that includes the System State (the registry files). Items that are reset include NTFS file system files and folders, the registry, policies, services, permissions , and group membership.
To restore your operating system to the original installation default security settings, follow these steps:
Click Start, click Run, type cmd, and then press ENTER.
In Windows XP, type the following command, and then press ENTER:secedit /configure /cfg %windir% epairsecsetup.inf /db secsetup.sdb /verbose.
In Windows Vista, type the following command, and then press ENTER:secedit /configure /cfg %windir%infdefltbase.inf /db defltbase.sdb /verbose.
You receive a "Task is completed" message and a warning message that something could not be done. You can safely ignore this message. For more information about this message, see the %windir%SecurityLogsScesrv.log file.
Next steps After you run this Microsoft Fix it (or complete these manual steps), standard user accounts may no longer appear on the log on screen when you start your computer or try to switch users. This occurs because standard user accounts are removed from the Users group when you reset Windows security settings. To add the affected users accounts back to the Users group, follow these steps:
1. Click Start, and then All Programs. Or click Programs.
2. Click Accessories, and then click Command Prompt (Windows XP). Or right-click Command Prompt, and then click Run As Administrator (Windows Vista).
3. In the Command Prompt window, type net users and then press ENTER. A list of user accounts is displayed.
4. For each account name listed in the Command Prompt that is missing from the log on or switch user screen, type the following command and then press ENTER:
net local group users account name /add
5. Now go to the "Did this fix the problem?" section.
More information In Windows Vista, the Defltbase.inf file is a Security configuration template for the default security. You can view the settings for this file in the following location: %windir%infdefltbase.inf
I made a backup to external hard drive of my mother's computer, before a conversion to Windows 7.At home in Austin I have transferred the folders, files to my dual boot Vista/Windows 7. I notice that even after taking ownership of the backup, that looking over permissions I am the owner, also the Administrator of my computer, but I need to find a way to have the inherited from apply to my account, as it is clear that not all folders and files are visible.Does anyone know what I need to do so that the entire hard drive has permissions for me applied to all folders and files on that specific hard drive?It is not the boot or system hard drve. I want to make sure I am not just the owner, but any inherited permissions apply to all folders and fles with an NTFS file system.I used to have some script several years ago when I applied this to servers I was working with. I just need to do this with one hard drive and Windows 7.
I've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
I've divided my disk into partitions and accidentally removed bootloader of windows and now I get "boot mgr is missing", so I cant load my windows. I have a disk and put boot order in BIOS but it still does not give me an opportunity to install windows, so I have only openSUSE right now, and 2 partitions of windows with C: and D: disks. How to restore this bootloader or at least make install windows 7?
did system restore no change to ntfs local disk.local disk changed to ntfs. cannot open local disk C:no windows action center, not working all including:Device Manager,Remote Settings,System protection not format.is there any other way except reinstallin OS again.My os is win 7 ultimate..
Okay, so I go to do a fresh install of Windows 7 on my machine as I have sveral times. I booted from the Win 7 cd and it came to the hard drive selection page. Here's where the trouble started. I have two identical 2TB hard drives and a 3TB drive in my machine. My gut told me to unhook my 2TB drive that I use for photos and music, the other 2TB is my data (C) drive. I said to myself, "Self, you have done this so many times, no problem". Well, problem. It deleted the partitions on my data drive. It never formatted the drive though. After the first reboot, my (C) drive booted and I knew that I was in a heap of trouble.
I had installed Windows 7 on one partition and it went bad for some unknow reason so I created another clean partion and installed win 7 on it. I also added partion for music, pictures, etc. Now the question is how do I get rid of the first version since it was giving me the BSOD. It boots as though I have dual boot but the second one listed it the one I would like to get rid of leaving user files intact.
