Hard Disk Locked - Do Not Create Partitions, Format Etc
Dec 6, 2012
I'm here with 8 hd's all blocked, formats need them but I'm not getting or creating a partition because they are blocked, HDD Unlock saw the program but is expensive and is paid
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
I have just installed Windows 7 on a new hard drive.
If i click on My Computer i see a C drive (Windows 7) with just the one partition as i expected.
But if i right click on My Computer and go to manage then go to disk managment is see that the hard drive with Windows 7 on has two partitions one called System Reserved and is 100Mb and then the C Drive with Windows 7 on.
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
I have changed the permissions for the access of files and folders in the security tab of given in the properties of the Hard Disk Partition.Now I other users of the same computer cannot access the drive or make changes there. I tried hard to solve the problem but the output is "Access Denied". Any way to make this permissions to its default(or The normal state which it was). My OS is Windows 7 Ultimate x64
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
I have bought a new laptop (DOS installed) and trying to install windows7 After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk) When iam trying to create new volume in disk management on unallocated space iam getting a prompt that "this action will convert the disk to dynamic disk" when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation" Even in the windows installation screen iam unable to select the unallocated space and format. I can see the options "format", "delete" disabled for the partitions I can see the options enabled for only few partitions. This is a brand new laptop with DOS installed and iam installing the windows for first time.how can i partition the hard disk and format?
I have got a laptop with win 7 on it. There is only one drive in laptop which is C: , I want to wipe the hard disk and install win xp professional on it.1- How can i format the hard disk which has win 7 on it?2- After formating the hard disk, would i able to install the window 7 through recovery disk which i have already made incase anything goes wrong?
I am trying to format a 320 GB disk drive as single storage that was once used on a motherboard as a Raid 0 array. I can format the disk drive as NTFS via a USB cable, but when I try and connect the drive internally on the motherboard, the computer does not see it. When I go to disk managment to try and initialize hhe drive, it list the drive as a array and gives me an error. I have tried this a couple times and am at a loss as to hoe to get rid of the "Array" name disk managment says it is.
I have bought a new laptop (DOS installed) and trying to install windows7After i installed windows 7, i can see only 30 gb drive in "My computer" (500 gb hard disk)When iam trying to create new volume in disk management on unallocated spaceiam getting a prompt that "this action will convert the disk to dynamic disk"when i proceeded with clicking ok i get an error message saying "Not enough space on the disk to perform the operation"Even in the windows installation screen iam unable to select the unallocated space and format.I can see the options "format", "delete" disabled for the partitionsI can see the options enabled for only few partitions.This is a brand new laptop with DOS installed and iam installing the windows for first time.
Recently, I'm unaware of what happened to my Hard disc, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
Am unable to read or write in my hard disk.. every time it shows msg saying not accessible. i tried to format but even that is not happening. i tried using cmd prompt. but no use.
I have a Fantom portable Hard Disk 1 TB.....and I've been using it since 1 Year. Recently, I'm unaware of what happened to it, If I connect it to my laptop or any other PC, it is asking me to format. I cant even open it, cant ready any data from it....If initiated for error check, to start an error check also, it is asking me to format.
I'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive on the MSI P67A-GD65 mobo with intel i7 2600k.
i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
I have an external harddisk that is encrypted using TrueCrypt. Each time I plug it in Windows prompts me to format the disk because it doesn't have any recognizable file system. Vista didn't use to do this. I suppose it's because of the UAC changes and a user couldn't normally do this in Vista. How to disable this prompt in Windows 7?
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
What would be the quickest way to create a completely locked-down account on my Windows 7 Home Premium so that my flatmates can play my Steam computer games without access to anything else? I've created an account and blocked it's access to the root of all drives via the Security tab of the Properties dialogue of each drive. I've also blocked access to all programs except steam.exe and associated programs.The problems are:some programs are set to run at start-up and yield an error for each program which cannot start - how can I disable start-up programs for a specific user account?steam.exe cannot run because I've blocked access to the drive - I want to be able to block their access in Wndows Explorer but not the authorised programs' access; you know?
I need some large storage space, preferably more than 2 TB. My Windows 7 is running as a virtual machine (VM or domU in Xen slang) on top of a Linux Xen hypervisor.I have two 2TB disks (to be exact: two partitions on them) set up as logical volumes (LVM) to give me 3.5TB disk space. I had formatted this virtual disk under Linux using NTFS format. Somehow the Linux utility mkfs -t ntfs didn't complain about the large size (maybe a bug?).In Windows the disk shows up with about 6 partitions, some of them unformatted. I then learned that NTFS has a limit of 2TB. The only option I got under Windows was creating a VDH volume, probably the Microsoft equivalent of LVM.Now I'm wondering what the best (or available) options are for getting a 3.5TB single partition to work under Windows?
As far as I know, Linux supports VDH. But I'm a bit worried about performance and administration/backup. My LVM setup is using stripe to get similar performance to RAID0. The data on the logical volume are almost entirely larger files, starting from several hundred KB to usually at least 16MB up to a few hundred MB or even above 1GB.Backup will be done within Linux using LVM snapshots and then backing up the entire volume at the first run, later incremental backups. A third backup will be on external drives. I also like to stick with LVM volumes, as I have the ability to add more drives when needed and increase the logical volume accordingly. I will be needing some 8-12TB storage space all together inside the box, and some 4-6 TB external drive capacity for backup.In other words, the 2TB limit of NTFS is a real pain in the neck. What are the Windows alternatives for larger volumes? How do they perform?
I installed Windows7 Ultimate from scratch, and it warns that it might create a 100MB partition before creating a second one where the real stuff lives. This makes imaging more complicated.
Code: # fdisk -luDisk /dev/sda: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0xf1f75308 Device Boot Start End Blocks Id System/dev/sda1 * 2048 206847 102400 7 HPFS/NTFSPartition 1 does not end on cylinder boundary./dev/sda2 206848 30722047 15257600 7 HPFS/NTFS/dev/sda3 172908544 254828543 40960000 83 Linux
Does someone know why Windows7 needs two partitions, and whether it's possible to have a single partition?
I'm also interested to know if any steps are required before imaging Windows7 (sysrep, etc.) where the image will be reinstalled on the same host (own test machine).