Create System Image Won't Detect External Hard Disk?
Feb 27, 2012
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
I recently installed a program to allow my PC to read Mac formatted hard disks.However, it did not work and from then forward, my PC is unable to detect all other external hard disks, I've tried a few. The drives are not even showing on disk management. The lights on the hard disk do light up with I plug them in but nothing happens.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
Recently I change my Os from windows vista to 7. Because I can't find a way to make the original OS to become genuine.From there, my laptop can't read external hard drive but it can only read flash drives.I don't know what my laptop is missing, if it is updates or drivers.
When i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
when i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
i am trying to back up and create a system image but evert time i do i get this error THE SYSTEM CANNOT FIND THE FILE SPECIFIED OX87007002, i have window 7 64 bit professional i think the problem is with this system reserved partition
I have had xp for a long time on a custom computer. Recently I contracted a virus (namely the xp antivirus 2012 system virus). I decided to reformat the hard drive, as I do not have the original xp discs, I bought windows 7 (the full version, not upgrade). While trying to install windows 7 and subsequently reformat the hard drive, the installation program can not detect any hard disk whatsoever.
Another problem is that the virus has corrupted my computer to the point where I cannot even load xp. All my computer is currently good for is watching it try to load.
I have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card. I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. However, During installation, my hard disk is not being detected (There is no drive on screen which I can format or set up on.) Can anyone help? Do I need to update my BIOS?Also, I recently changed my hard disk (upgraded it) and XP has been installed and is running fine.
Not exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
When I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
I have Win 7 64 bit installed on my laptop as well as my desktop. System images for both are on external HD's.
On the laptop, I have created a system image on blank DVD's using DVD-R's. No problems -- I can restore from the DVD's.
However, when I try to create a system image on blank DVD-R's on my desktop, I get a message saying something like, "format was unsuccessful." If I use a DVD+RW the process runs to completion and I can restore from it. I had to use RW's because I don't have and +R's.
I get the same unsuccessful message if I try to format a blank DVD-R with Win 7.
My DVD burner on the desktop says it is a +R. Does that mean I can't use -R's.
I've no idea whether this is a Win 7 problem, burner problem or a problem on my part.
Would someone please try to straighten out the dense old mind?
On the Backup and Restore page, it lists the two Thread title options?-
I read that you can't restore individual files from system image, but I'm wondering if I need to create both in order to do an emergency system restore using boot disc/or... (D: drive)?
I have a 1TB drive that partitioned with 120gb system and rest is a non primary/non boot data partition volume... I've never used windows 7 create system image, but want to. When I try to create a system image it insist on backing up both drives. I don't see how to deselect the data drive. Is this because I have installed something system related. on the data drive? And Finally, how will recovery of a system image works if I get a blue screen, do I need to install windows 7 again first or have a repair CD? I noticed when I started a create system image it asked me for the destination drive, no exact path on the drive, does the image have be created on the root of the destination drive?
anybody else having this issue with the upgrade of Windows 7 HP on a HP machine as a matter of fact as well with there upgrade version.
It's like what i am trying to do is this.
New with True Image - Couple basic kinda questions ??? | Forums
That is my post an explain pretty much what i am trying to do (even though that one focus's on that certain program for questions there but)
mainly trying to do a system restore image disc. That way every time i want to or have to reformat i do not have to go through the whole damn going back to Vista then the whole upgrade process again.
Anyways so speaking with HP of course we know there is no way to do this or for me even to get a HD with factory Windows 7 installed on it WITH a Windows 7 recovery partition factory done. So this is really the only way to do it. Where it would kinda actually be like a Windows 7 recovery partition.
OK with that being said. Speaking with HP came up the idea and notice the new features and system in the backup and recover section where you can create a repair disc or create a system image.
Well they said to create a repair disc and i could use it to go back to a so called day one install or fresh install/upgrade of Windows 7.
OK we know this is not true as it is only a repair disc only so.. This is where it gets back to "is these screwed up and not working for you guy's either" as the title say's.
The one link inside the backup section that says "create system image" is not working. It kinda stops and freezes up half way through on same spot every time. When it gets to disc#3. It tells to take out and insert another disc label it blah blah blah.. but at that point will not even open the disc tray. Gotta cancel it out and then restart (even to open the tray and get the disc out). More less to even try and finish the process. Which i tried it 3 times and same thing every time.
Using dvd-rw's as well. My systems fine and plenty bad azz so i know that's not it either or that that is what is making it freeze up. Soo.. anybody else try this yet and having the same problem with that feature?
I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
I've been using computers ever since Windows 3.1 and '95 and I have been plagued with dozens upon dozens of hdd crashes and similar occurrences which forced me to reformat and reinstall all the programs I use (and have to search and find them again...). I have learned a lot since '95. One method of keeping my apps and media safer is by keeping them on a separate larger internal hdd and running my OS on a smaller ~400gb hard drive. I have just gotten into creating full system images with Acronis that fill up 3+ blu ray discs, which is ok if I'm only making one ever, but my documents and programs consist of more than half of that data. It would be nice to make one full system image right after I reformat my computer and install all device drivers I'll be using; my questions below are in regards to making images of the programs to allow very simple install later. Let me say this as well: I know of the extreme difficulty of taking a system image created on 'PC A' and using it on 'PC B'.Basically unless PC A and B the same brand and model something is bound to not work correctly due to driver issues and hardware incompatibility. Anyways, what I am interested in now is to get one of my computers installed with all the software and plugins I typically use and create a "system image" consisting of only my programs and the necessary files to have them run properly. I understand this may be unfeasible but I'd like to further my knowledge and hear from others their ideas to my problem. I say it may be unfeasible because, when installing a program, files are saved into many different directories, including various folders within "Users" and the hidden folder "ProgramData" (as well as possibly to the "Windows" folder and/or C: as well as the computer's registry).I feel this may work if I get every file that was created at installation time as well as run windows 7 on all of my computers that I'll be using this "software-only system image" on.Is there any software that will allow me to accomplish my goal or at least make my job easier?If this is possible and assuming I'll only be using 64-bit versions of Win7, will I run into problems between, say, Home Premium and Ultimate? Is the structure or layout of the OS different in the ways / directories it installs programs into?If the above fails or is impossible then.I was considering another idea but with more work for me.In school, both high school and college we had computer labs and every computer had the same programs installed and there were many programs (say 20 programs * 100 computers in the larger labs). Albeit the computers were the same make/model, lets forget that fact for the purpose of this question, as well as the fact that all the computers were networked together which may allow little tricks here and there... Forget those facts and here is my last question: Instead of just having an image of already installed programs would there be a way for me to somehow install, say, 50 programs without launching each one individually? I would be very surprised if a program like this didn't already exist for IT people yet. For example, in a law firm, if someone in the office gets a virus do they call in the IT guys and they 1) reformat the computer 2) install OS 3) reinstall all required software one after the next? Seems a bit time consuming, in my example 20 apps * 100 computers, I couldn't imagine installing the same programs 2000 times.
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux .
I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
I have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)