When i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 2 Replieswhen i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 1 Replies View RelatedI've had a sudden loss of my hard drive space. I've deleted alot of stuff, like over 20GB, more then just a few times and it just disappeared in less then 2 days. I've read some topics here with the about same problem and tried what they sugested there: to use software like WinDirStat, TreeSize Free and SpaceSniffer. But they just won't show me my whole hard drive. The stop at 50% and show it as if they have scan the whole 100%.
View 3 Replies View RelatedMe and my fiance just finished putting together her first real gaming computer and we wanted to use a Patriot 64g SSD to put win 7 on and use a 1TB Seagate drive for all the rest of the storage. The installation of Win 7 onto the SSD went nice and smooth but when we get into windows it is not detecting the 1TB HD at all. Funny thing is that when I go in to the SSD properties, I can see the Seagate under the sharing options. The only info I have found is how to clone off an existing hard drive with Win 7 on it not how to do a fresh install on 2 new drives.
View 1 Replies View Relatedi am gettin the msg "Windows has stopped this device because it has reported problems. (Code 43)"...
View 3 Replies View RelatedI have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
View 3 Replies View Relatedhow do you download Seagate external hard drive for free to my pc
View 1 Replies View RelatedI have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
View 4 Replies View RelatedI am getting 2 error messages. chronically I get filedeviceHarddisc volume 3$Mft. like every 10 minutes. The other is E:vlc-1.0.5-win32exe. I reinstalled the vlc program and haven't seen that error message for awhile. I checked the hard drive with seagate and it is functioning properly.
View 2 Replies View RelatedRecently I change my Os from windows vista to 7. Because I can't find a way to make the original OS to become genuine.From there, my laptop can't read external hard drive but it can only read flash drives.I don't know what my laptop is missing, if it is updates or drivers.
View 8 Replies View RelatedI am running Windows 7 on my computer and have somehow used windows security to lock my seagate external drive. The computer can tell that the drive is there but I cannot access anything on the drive and also cannot write to it. I have tried talking to tech support from Seagate and they said that since I have used a third party program that I need to contact them. It is difficult to get a response from them. I am a novice when it comes to things like this.
View 7 Replies View RelatedI recently installed a program to allow my PC to read Mac formatted hard disks.However, it did not work and from then forward, my PC is unable to detect all other external hard disks, I've tried a few. The drives are not even showing on disk management. The lights on the hard disk do light up with I plug them in but nothing happens.
View 8 Replies View RelatedMy computer stopped detecting the external hard disk suddenly. I tried locating the drive in disk management but it is not showing up there.
View 9 Replies View RelatedI'm wondering if anyone else has had the following issue with USB connected external drive and Windows 7 Ultimate 64-bit:
When plugged in, the external drive is recognized by the OS, is accessible and in every aspect functions normally. After a period of non-use of the computer, e.g. 8 hours, the USB device gets knocked out. Logging back to Windows, and the 1st message will be "Unrecognized USB device", and the external drive is not visible anymore.
The only way to get the device back is to disconnect its power supply, and plug it back in.
I've done the following :
1) Changed the USB power settings of the OS. USB devices are not allowed to go to sleep
2) Changed the power setting from Seagate Manager to not allow the drive to go to sleep
3) Changed USB Legacy to Enabled on BIOS
i installed a new seagate 2TB internal hard drive and now Windows Update and Windows Search won't work. Does anyone know where to get the MS drivers to fix this?
View 1 Replies View Relatedi installed a new seagate 2TB internal hard drive and now Windows Update and Windows Search won't work. Does anyone know where to get the MS drivers to fix this?
View 1 Replies View RelatedThis isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies View RelatedI have a Seagate external hard drive filled with photos from a mac. I am now trying to copy those onto a pc. Windows does not recognize the drive
View 5 Replies View RelatedI have my external drive, I am connecting to my computer but its not detecting.I have HP probook 6455b, window 7 laptop.
View 1 Replies View Relatedi am trying to connect my internal harddrive for my dead laptop via a usb port of a working one, but i get the message that the device is not recognized
View 1 Replies View RelatedWindow detect my external usb drive(WD 1023) slow, removing it with safety remove too slow, copying and deleting takes too long.
View 3 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?
View 3 Replies View RelatedI have tried to use this IOMAX USB 2.0 to SATA/IDE Adapter Kit with Power: Amazon.co.uk: Electronics to connect an old 250 gb Samsung sata hard drive to my PC.Windows won't recognise it as a hard drive/partition - the USB adapter device is recognised, and via Devices & Printers, it shows the drive, but not as a USB External Drive, (see image) so I cannot access it.
View 3 Replies View RelatedOn my old secondary computer my setup was
Motherboard: Chaintech VNF2-350
Master 0: HDS722516VLAT80 with Windows installation
Slave 0: WD800BB-53CCB0
But then I started getting Machine Check Exceptions and my motherboard ultimately perished. So I replaced that with a Foxconn K8S755A-6ELRS. But this new motherboard won't detect the hard drive.
It will hang at the part that says "Detecting IDE drives", sometimes it will give up and display "0" where the drive is supposed to be, other times it will hang until you unplug the cable.
If it's on the same channel as the Hitachi drive with XP on it, the BIOS recognizes the other drive, but fails to boot from it. If they are on different channels, it boots the XP drive but will see no hint of the drive on the other channel., even in Disk Management or Device Manager.
I also tried connecting it to my other computer's Intel DP35DP mobo, and it was able to detect/read/write and all that, though it does have a few bad sectors.
i was installing window 7 and so far i have ubuntu installed but the set up could not detect any hard drive
View 3 Replies View RelatedInstall everything, the bios detect the hard drive (it's a new hard drive, never been use) but when installing the Windows 7 64, the hard drive list is empty.
Here my spec
Phenom II 940BE | Gigabyte 790X-UD4P | Seagate Barracuda 7200.12 500GB | XFX HD4770 512MB | OCZ StealthXStream 600W | NZXT Tempest
Here's my hard drive: Seagate Constellation ES ST3500514NS
I haven't been able to get Windows 7 installation to detect this drive for about two months now. I'm running on a Gigabyte GA-880GA-UD3H mobo, revision 2.1.
I recently found a list of drivers for my motherboard on Gigabyte. I also found some downloads for my hard drive.
Oh, and I can use this drive if I'm running Windows 7 on a different hard drive, but I just can't install Windows 7 on it.
I recently embarked on the journey of building my first custom PC. Everything was going well, until I hit a speed bump of installing Windows 7 64 bit. So like usual I boot from the CD drive, and stick Windows 7 in. When it gets to the point where I'm going to install, it is unable to find my SATA drive to install Windows 7 on.
It then asks me to "locate drivers." So it gives me an option to browse, and when it does so I put in the disk that came with my mobo, but it's unable to find any drivers. I tried downloading drivers from my motherboard's web site, sticking them on an external HD, and locating them from there, but that still didn't work.
I checked in my BIOS, and my SATA type is under Native IDE. I tried switching it to AHCI, and my HD was no longer detected in the BIOS, switched back to Native IDE and it found it again. Also, Onchip IDE Channel is set to Disabled, and Onchip SATA Control is set to Enabled, does this matter any?
I was wondering,though, is it possible that if I set the SATA type to AHCI, move the SATA cables into ports so that the drive is recognized by my BIOS, use the AHCI drivers I downloaded, Windows 7 will detect it?
i've been having some really weird freezes, sometimes its just the windows but multimedia keyboard keys / mouse still work, other times it completely freezes (cant even move the mouse.).Usually if i wait a little bit the computer goes back to normal by itself, other times i get BSOD.Im pretty sure its hardware related because i've tried formatting and got a bsod right after installing windows, i suspect the hard drive because when the computer freezes all HDD activity stops, when the computer manages to recover the hard drive activity comes back exactly at the same time the system unfreezes, sometimes if i run chkdsk there are lots and lots of errors, windows fixes them but they come back sooner or later, also, sometimes the computer doesn't detect the hard drive after a BSOD, turning the computer off and then on always "fixes" that tho.
The only reason im not 100% sure its the HDD its because all HDD utilities i've tried (incluiding western digital diagnostics software) say the disk is fine, can SMART be wrong I've also ran memtest and no errors (just one pass tho)Things seem to have gotten worse when i changed the graphic card, however i remember getting these freezes with the old one, just not as serious, prolly just a coincidence.I remember getting 3 kinds of BSOD errors: driver_power_state_failure, pagefault_in_nonpaged_area and kernel_data_inpage_error.A week ago i turned my pc on and windows was broken, startup repair thing would show up and try to repair but failed no matter how many times i tried, this never happened to me before so it must be related.
I installed Windows 7 32 bit ultimate edition to my acer notebook today. After taking my laptop to my office it didnt boot up. Taking so long to detect a hard drive. But when i press any key, it detect hardisk and boot up properly..
View 6 Replies View Related