Seagate External Hard Drive Not Recognized By Computer
May 5, 2012
I have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
View 3 Replies
ADVERTISEMENT
Apr 7, 2012
i am gettin the msg "Windows has stopped this device because it has reported problems. (Code 43)"...
View 3 Replies
View Related
Oct 17, 2012
When i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 2 Replies
View Related
Oct 17, 2012
when i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 1 Replies
View Related
Dec 18, 2012
how do you download Seagate external hard drive for free to my pc
View 1 Replies
View Related
Dec 1, 2012
I have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
View 4 Replies
View Related
Feb 18, 2010
I am getting 2 error messages. chronically I get filedeviceHarddisc volume 3$Mft. like every 10 minutes. The other is E:vlc-1.0.5-win32exe. I reinstalled the vlc program and haven't seen that error message for awhile. I checked the hard drive with seagate and it is functioning properly.
View 2 Replies
View Related
Jan 4, 2012
Attached an external sata hd with an esata connection. After power boot, external drive not recognized and also secondary internal sata hd not recognized.
Do I need to do something to the BIOS?Sinch stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 5 Replies
View Related
Feb 26, 2011
I've been using a 1TB iOmega external hard drive with my laptop for about a month and a few days ago it stopped working and isn't being recognised, the power light comes on when i connect the usb cable to the laptop but there is no noise from the hard drive at all and it doesn't show in disk management.
I took it into work with me and connected to my work PC (which runs XP) and it works fine, also tried it on another laptop which is running Vista and it doesn't work.
Laptop is an HP Pavilion DV6
View 5 Replies
View Related
Jul 1, 2011
I have an external hard drive, and a lot of data saved on it. My laptop recognises it, but i can't access it. When i go to device manager and try intialize, it says it is not ready.
View 3 Replies
View Related
Aug 24, 2011
my external Seagate hard drive is no longer being recognized by my system. The information on this is absolutely critical to me- I am a DJ and Producer and this particular drive contains all of my song stems, acapellas, instrumentals, sample kits, and also backups of every program I use (as well as my OS backup).
I just recently moved into a new apartment and my drive worked fine before the move 2 days ago. I do not think I bumped it or damaged it (seeing as how I always put them in safe places on the go) and it is now no longer working.
View 9 Replies
View Related
Nov 15, 2011
I have a My Book Essential 1TB External. I'm on Windows 7 x64. After I updated I've been getting a lot of bugs and extreme lag. I would click on the drive in My Computer, enter my HD password and the drive would open up with all my folders, etc. But then when I wanted to drag folders from my External onto my PC hard drive it would freeze up and automatically quit? Windows would no longer show the External as attached to my computer. No matter how many times I click on the icon in the task bar for WD SmartWare, it will never come back up. I have to restart my PC everytime so I can renter the External. I then installed all WD software from the Control Panel, didn't change anything or help at all.I have no clue what to do or what has happened, but my External HD is pretty much useless right now. I have very important files on there, I need to get access to this immediately.
EDIT: Now my PC has trouble recognizing the External. I tried it on my Laptop also, it doesn't show anything. It shows up under disk management sometimes. For example it'll show up then simply disappear.
Finally after restarting my PC a bunch of times and switching USB ports back and forth, this CD DRIVE E: icon appeared for the WD UNLOCKER. Whenever I try and double click on it to open it up, the green bar appears to load as seen below, then the icon just disappears, it will not open anything. When the "CD Drive (E:) WD Unlocker appears like above, my external HD will briefly appear under DISK MANAGEMENT. It shows up then just goes away along with the E: drive icon. I don't know if the USB cable that connects the External to my PC is bad or not? My external was working an hour before all this happened, so I don't understand what is happening? Also, when I click on "Devices and Printers", an icon appears with "My Book 1130". This is what is shows.
My External does light up when plugged into my PC and turns off when removed. I can hear a ticking sound which sounds like the HD working? All these problems seemed to start after I updated to WD SmartWare 1.5.1.6. I even unistalled all the WD software. For some reason whenever I try to install "WDSmartWare_Software_Upgrader_for_Windows_1.5.1.6 " it just sits there and hangs, doesn't do anything.
View 9 Replies
View Related
Apr 14, 2010
I have a toshiba external 200G hard drive. It was used on a Dell computer which ran Windows XP. I now have a new computer which runs windows 7. However when i connect the external hard drive to the new computer i start to experience problems with the files on there.
So there are a number of directories, my pics for example. When I click on it you can see the pics on some of the sub folders when you view via icons. Some you cannot see the pic, just shows a generic shot. When you try and open the pics / jpegs you get an error saying image not found, check 'full pathname / file' exists. The same is true for all files, docs etc
I have been able to load the same pics and docs via a cd, so it is a problem with my new pc recognising the hard drive as opposed to a problem with the files
View 4 Replies
View Related
Feb 21, 2012
iomega ego 500 gb was working fine until today and now it won't recognize the drive at all. it recognizes the partitioned cd virtual drive in it, but not the larger storage drive. I plugged it into two different computers and it is recognized and i can drag and drop files. I also plugged in a usb flash drive into the same usb port and it works...so the usb drive works. I was told to assign the drive a letter in disk management, but it doesn't even show up there.
View 2 Replies
View Related
Aug 10, 2012
and i got problem with my brothers WD external hard drive, it's not recognized in my computer, my brother says "it lost the drive letter or may be some files broken" he had some knowledge about that but we can't fix that one.
View 9 Replies
View Related
Aug 12, 2011
my computer not faund iomega hard drive
View 1 Replies
View Related
Nov 23, 2011
how can i get the simpletech external hard drive to be reconized by my computer
View 1 Replies
View Related
Dec 21, 2011
the iomega_HDD(F use to be reconized and it was droped and now it is not reconized. the ubs connection is good i tried on another divice and it was reconized. The light on the imogea_HDD(F is on when plugged in but it makes a ticking sound and it is not reconized?
View 3 Replies
View Related
Apr 13, 2012
My Iomega external drive stopped working. One minute it was fine and the next I could not see it anymore. Tried two different laptops and neither sees it.
View 4 Replies
View Related
Apr 21, 2012
usb are not recognized and no power seen at external hard drive
View 1 Replies
View Related
May 31, 2012
my maxtor onetouch external drive is not being recognized by my computer
View 2 Replies
View Related
May 31, 2012
my maxtor onetouch external drive is not being recognized by my computer?
View 1 Replies
View Related
Jul 4, 2011
I have an external Samsung 640Gb hard drive which is not showing up in Windows Explorer, even though Device Manager shows it as recognized and working properly. I am running Windows 7 Home and this is something new as when I bought the drive it showed up in Explorer. I really need this drive as all my backups and programs are on it!
View 3 Replies
View Related
Feb 15, 2012
Iomega eGo 500GB External Hard Drive isn't recognized
View 1 Replies
View Related
Dec 11, 2012
I have a 3 Tera HDD. (WD My Book Essential (USB 3.0)). Last night I uninstalled a software which I do not remember its name by mistake. Apparently it was related to my WD hard drive for my computer does not recognize it anymore. I checked my device manager; "Base System Device" is not recognized. I ran windows troubleshooting. It says "Base System Device" Driver is not found. I searched a lot, but I couldn't find the driver. I also ran drive checker software.
It says:
Device name: JMB38X SD/MMC Host Controller
File name: MSI_GX633_Card For Windows 7.zip
Hardware ID: PCIVEN_197B&DEV_2382
I could not find this too. I also have another portable WD which is still recognized by my computer.
View 3 Replies
View Related
Oct 19, 2012
I have a terabyte external, WD Element I think. I have never had an issues before but today I plug it in (to play Diablo III) and it is not being recognized. At all. It's not in Disk Management, I can't find it anywhere. Suggestions or reasons this might be happening out of no where??
View 1 Replies
View Related
Oct 23, 2011
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies
View Related
Jul 30, 2012
My Seagate Expansion drive is not being recognized on my laptop or any other computer that I have tried to put it on. It worked for a while It is fairly new and I have about 500gb on it so far and I don't want to lose any of my data because most of it is my university files.I don't know why this is happening and I also can't even change the drive letter, I really don't know much about computers but
View 3 Replies
View Related
Jan 22, 2013
Drive was fine in XP, new computer with 7, USB plug-in shows "USB Device Not Recognized?" The driver is up to date, per driver upgrade site?
View 8 Replies
View Related
Oct 24, 2012
I am running Windows 7 on my computer and have somehow used windows security to lock my seagate external drive. The computer can tell that the drive is there but I cannot access anything on the drive and also cannot write to it. I have tried talking to tech support from Seagate and they said that since I have used a third party program that I need to contact them. It is difficult to get a response from them. I am a novice when it comes to things like this.
View 7 Replies
View Related
Dec 17, 2012
I have plugged my old Seagate external hdd into my new Acer with Windows 7 64-bit Home Premium. I am trying to pull files on to the new computer. It says I don't have permission to access the folders. How do I go about getting that permission while it is plugged into the new computer?
View 8 Replies
View Related
