My Seagate Expansion drive is not being recognized on my laptop or any other computer that I have tried to put it on. It worked for a while It is fairly new and I have about 500gb on it so far and I don't want to lose any of my data because most of it is my university files.I don't know why this is happening and I also can't even change the drive letter, I really don't know much about computers but
View 3 RepliesI bought my external hard drive for about 8 month now.. it use 2.0 usb and i'm afraid i cannot recover my files inside it.
View 2 Replies View Relatedi am gettin the msg "Windows has stopped this device because it has reported problems. (Code 43)"...
View 3 Replies View RelatedI have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
View 3 Replies View Relatedi am trying to connect my internal harddrive for my dead laptop via a usb port of a working one, but i get the message that the device is not recognized
View 1 Replies View RelatedQuote: Seagate has confirmed plans to release a 3TB hard disk drive later this year. However, the 3TB drive will only be recognized by 64-bit operating systems, such as Windows 7, Vista and Linux. "Not only that, but you may not even be able to see 2.1TB of a 3TB drive when using Windows XP," wrote Thinq's Ben Hardwidge Read More: Seagate says 3TB drive requires 64-bit OS | TG Daily
View 9 Replies View RelatedI installed 3t Barracuda hard drive and I can`t see the location of this driver with the other local drives
View 2 Replies View RelatedI was playing Mass Effect earlier. Got off because of school, so i put it to sleep. When i returned home, I tried getting on steam. The path wasn't found, so I didn't think anything of it. Rebooted. Still no path, so i go to my slave HDD, and surprise! It wasn't there for some reason. I've looked for it in disk management; no where to be found. Ran seatools, no luck. I had around 300 GiGs on there.I also turned off the laptop, took out the battery, and both master and slave drives for an hour. NOTHING.
EDIT: when i check disk management, it seems there is a drive of some sort on there, but it has no name.. It's blank. Nothing but *Status* has any information: "Healthy (OEM partition)." When i try to right click, the menu only has a "Help" tab.
i installed a new seagate 2TB internal hard drive and now Windows Update and Windows Search won't work. Does anyone know where to get the MS drivers to fix this?
View 1 Replies View Relatedi installed a new seagate 2TB internal hard drive and now Windows Update and Windows Search won't work. Does anyone know where to get the MS drivers to fix this?
View 1 Replies View RelatedI am running Windows 7 on my computer and have somehow used windows security to lock my seagate external drive. The computer can tell that the drive is there but I cannot access anything on the drive and also cannot write to it. I have tried talking to tech support from Seagate and they said that since I have used a third party program that I need to contact them. It is difficult to get a response from them. I am a novice when it comes to things like this.
View 7 Replies View RelatedI have a Seagate external hard drive filled with photos from a mac. I am now trying to copy those onto a pc. Windows does not recognize the drive
View 5 Replies View RelatedWhen i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 2 Replies View Relatedwhen i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 1 Replies View RelatedUsing Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).
If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?
how do you download Seagate external hard drive for free to my pc
View 1 Replies View RelatedMy Seagate GoFlex 2 TB USB 3 drive has suddenly stopped working. When it happened, I was having many issues with Windows (for about 10 minutes and 3 reboots). It seems to have calmed down now but I am still having problems with USB devices. When I plug the external HD into the top USB ports (next to the wireless dongle for keybd/mouse), the keyboard stops working. In the system error logs I am getting this critical error: The driver DriverWUDFRd failed to load for the device RootSIDESHOW000. I am also noticing that I have an unknown device in my device manager. I am also having a message come up when I start the computer saying that Windows cannot connect to the Group Policy Controller. It says that it is timing out. [code]
View 2 Replies View RelatedI've had a sudden loss of my hard drive space. I've deleted alot of stuff, like over 20GB, more then just a few times and it just disappeared in less then 2 days. I've read some topics here with the about same problem and tried what they sugested there: to use software like WinDirStat, TreeSize Free and SpaceSniffer. But they just won't show me my whole hard drive. The stop at 50% and show it as if they have scan the whole 100%.
View 3 Replies View RelatedI'm wondering if anyone else has had the following issue with USB connected external drive and Windows 7 Ultimate 64-bit:
When plugged in, the external drive is recognized by the OS, is accessible and in every aspect functions normally. After a period of non-use of the computer, e.g. 8 hours, the USB device gets knocked out. Logging back to Windows, and the 1st message will be "Unrecognized USB device", and the external drive is not visible anymore.
The only way to get the device back is to disconnect its power supply, and plug it back in.
I've done the following :
1) Changed the USB power settings of the OS. USB devices are not allowed to go to sleep
2) Changed the power setting from Seagate Manager to not allow the drive to go to sleep
3) Changed USB Legacy to Enabled on BIOS
Me and my fiance just finished putting together her first real gaming computer and we wanted to use a Patriot 64g SSD to put win 7 on and use a 1TB Seagate drive for all the rest of the storage. The installation of Win 7 onto the SSD went nice and smooth but when we get into windows it is not detecting the 1TB HD at all. Funny thing is that when I go in to the SSD properties, I can see the Seagate under the sharing options. The only info I have found is how to clone off an existing hard drive with Win 7 on it not how to do a fresh install on 2 new drives.
View 1 Replies View RelatedI have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
View 4 Replies View RelatedI am getting 2 error messages. chronically I get filedeviceHarddisc volume 3$Mft. like every 10 minutes. The other is E:vlc-1.0.5-win32exe. I reinstalled the vlc program and haven't seen that error message for awhile. I checked the hard drive with seagate and it is functioning properly.
View 2 Replies View RelatedI have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?
View 3 Replies View RelatedI'm not certain if this has anything to do with Windows, or my motherboard, or overloading my system, or whatever. But I could use some input.
I built my current system in the summer of 2009. I tried to "futureproof" as much as I could by putting in a Corei7 processor (the low-end, 2.66 Ghz one), an Intel 80 GB SSD boot drive, a 10,000 RPM WD Velociraptor secondary drive, 12 GB of DDR3 1666Mhz RAM which I later learned my Gigabyte GA EX58-UD5 Motherboard DID NOT want to run natively any faster than 1333 Mhz, a 2GB DDR5 ATI 4870 Sapphire video card, and a BD-write drive I already had I'd installed in a prior system, as well as a DVD-writer and a card reader/writer with additional built-in USB ports and an E-SATA port.
This particular motherboard came with 10 SATA 2 ports and 10 USB ports (not to mention more I got with the Coolermaster Haf 937 case I used and that card reader, plus a couple firewire ports (I LIKE lots of connectivity). I never used all my SATA2 ports, although quite a few were hooked up, what with the connections for the case and card reader (which has since bit the dust)...
Anyway, a year or two later, after SATA 3 and USB came out, Newegg had 600GB WD Velociraptor SATA3 drives on sale for LESS than I'd paid for my 300 GB SATA 2 drive, and since I largely used external drives for a lot of my storage, and those were becoming available in USB 3, I found an ASUS card (U3S6 -- PCI-E 4) that had two internal SATA 3 connectors and two external USB3 connectors, and away I went. (I also added an additional internal SATA 2 7200 Hitachi 2 TB drive as a primary file storage drive at that time, with the first SATA 3 external a 2 TB SATA 3 to use as backup.) Those drives all show up FINE when I boot up, but often after a few hours, or a day or two, they'll just "disappear" from my list of drives. I find this QUITE disconcerting, as the 80GB Intel SSD has proven too small, what with the 14 GB WinSXS is now taking up, and I just ordered a 256 GB SSD that comes with Acronis True Image from Newegg to clone it to -- and of course it's SATA3. As I didn't have any more SATA 3 slots left, I also ordered another SATA 3 card. The ONLY slot I had left was a PCI-E -1 slot, which it appears that card is designed for, but as this new drive will be my BOOT drive, with Windows and all my PROGRAMS running off it, I certainly don't need the system "losing IT" in the middle of a session! (Note, the SATA 2 Hitachi drive NEVER fails to show up. Neither do the 300 GB Velociraptor nor the 80 GB Intel SSD, which are all on the built-in SATA 2 BUS).
I've considered replacing this motherboard, as it's had some issues (BOTH of the two gigabit ethernet connections that came with it petered out, and I had to buy an add-on card to get my gigabit ethernet back (one WASTED PCI slot)! However, I've yet to find ANY other motherboards that have anywhere NEAR the connectivity this Gigabyte board came with. Or is that the problem? Did Gigabyte overload this board?
The other day I thought to update the BIOS on the board, and although it took two reboots, I haven't "lost" any of those drives since (been on, or in "Sleep" mode ever since), so maybe it needed a BIOS update. I also went into the BIOS "Intelligent Tweaker" and toned down any settings that warned might create an unstable system (I was already pretty conservative with those, but I went a bit more conservative).
whenever i try to install my command and conquer generals and command and conquer generals zero hour games, i just get the error message " ***MISSING MESSAGES***IDS_AUTORUN_TITLE and IDS_CANT_FIND" can anybody help? both these games worked fine on my old laptop, once i tried them on this toshiba this happened. i am running windows 7.
View 3 Replies View RelatedI have just upgraded to Windows 7 and have discovered an annoyance with Windows Explorer. When I expand a folder's contents (tree) by clicking on the arrow icon, the entire contents of the left panel jump to the bottom of the visible screen (rather than just the subfolders expanding). The annoyance is that every time I expand a tree in the Explorer, I also have to scroll the contents of the left panel back up (because it jumped down). For example, in Vista, if I expanded a folder tree, only the sub folders would expand and move downward.
View 9 Replies View RelatedJust got a question regarding D2 - LOD expansion. Here's what happened, I downloaded the game, installed the game. All good then I mounted the Expansion image via Daemon Tools, had no success. It's not accepting / won't run the image and gave me an error. I got freaked out. System froze and there's nothing that I can do aside from pressing the "reset" button. Is my OS compatible to the game? I got a broken file on my OS (OS issues) or the image itself is corrupted?
View 6 Replies View RelatedI'm having a bit of a problem with my DVD drives not being recognized. In a prior post, one of the fellows on this stream (Randy) solved the problem I'm having by suggesting that I edit the Upper and Lower Filters in the Registry. Unfortunately, I've lost this information. This time, I'll put it in a Jump Drive and lock in a safe!
View 2 Replies View RelatedI have a Sandisk Cruzer Titainium 4MB USB drive. It is recognized as a 'CD drive' and I can't do anything with it at all.
View 2 Replies View RelatedThe other day, my computer seemed to totally stop recognizing that my CD/DVD drive even existed. No icon in my computer, with or without a disc in it.
View 1 Replies View RelatedGot windows 7 for xmas, 32 and 64 bit, been all over the internet trying to find a solution to this problem !!
the problem is basically when i put in my windows installation disc, its not recognised or appearing in the dvd drive on my computer.
The dvd works as i tried it on my friends pc last night to see if maybe they'd sent me a blank one or something.
It shows up as having nothing in the drive
My mobo is Asus p5n-d and my dvd is optiarc ad-1707S
Please help i can't take windows xp any longer