Fresh Windows 7 Install On SSD And Will Not Detect New Seagate Hard Drive
Nov 17, 2011
I've had a sudden loss of my hard drive space. I've deleted alot of stuff, like over 20GB, more then just a few times and it just disappeared in less then 2 days. I've read some topics here with the about same problem and tried what they sugested there: to use software like WinDirStat, TreeSize Free and SpaceSniffer. But they just won't show me my whole hard drive. The stop at 50% and show it as if they have scan the whole 100%.
Me and my fiance just finished putting together her first real gaming computer and we wanted to use a Patriot 64g SSD to put win 7 on and use a 1TB Seagate drive for all the rest of the storage. The installation of Win 7 onto the SSD went nice and smooth but when we get into windows it is not detecting the 1TB HD at all. Funny thing is that when I go in to the SSD properties, I can see the Seagate under the sharing options. The only info I have found is how to clone off an existing hard drive with Win 7 on it not how to do a fresh install on 2 new drives.
When i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
when i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
I just reinstalled Windows 7 on a new hard drive and during the installation process, I split the disk into two equal partitions of 500gb. In 'My Computer' I can only see one partition which is the C drive but not the other partition. Looking in Disk Management, the other partition seems to be labelled as 'Unallocated'. How can I allocate this into a usable D drive? I would have expected this to happen automatically during the installation process.
I bought a new 2 Tb hard drive because my primary one was getting full. I would like to do a fresh install on the primary drive once I have moved over all the games, videos, pictures, etc. that I don't want to lose. I can format the primary drive and reinstall windows without affecting the content on the second drive, correct? Is there anything I need to know?
I've just installed a new hard drive and a fresh copy of Windows 7 Ultimate x64 on it, and I just received two BSODs within minutes of each other, citing ntoskrnl.exe withSYSTEM_SERVICE_EXCEPTION on BlueScreenView. I had periodical blue screens before my last HDD died so it's most likely something else causing it, maybe hardware... but not sure how to tell what. I've attached the necessary files.- the original installed OS on the system? Yes- Full retail version- What is the age of system (hardware)? About 5 years- What is the age of OS installation (have you re-installed the OS?) Two days
I am doing a motherboard upgrade for a friend. I need to know how I can move his hard drive with his current OS instal to the new motherboard without having to do a fresh Windows 7 install. He has too much that cannot be replaced. Is there a way to do this?
I have just bought a brand new hard drive due to my last ones controller failed.
Western Digital Caviar Black 500gb
So the problem,
Did a fresh install of win 7 (Build 7229) two nights ago, all installed perfectly, next day (yesterday) went to boot up pc and had the dos error message - Disk boot failure, please insert system disk and press enter.
My first impression was it may have been an install failure, so i formatted the hard drive and reinstalled. shutdown the PC and rebooted up and i had the same error message, now after this, i got my failed hard drive out and after a lot of faffing around, BIOS found it and it gave me the same error message.
Can anyone tell me what the problem might be. I have tried Windows startup repair, did not fix.
BIOS settings are
First boot device is Hard drive
second boot device is CD-ROM
(I have even swapped these around to boot from windows 7 and it just starts the setup procedure of installing windows drivers) I have even set boot order of HDDs so my main windows HDD is up top. Anyone got any clues.
i installed a new seagate 2TB internal hard drive and now Windows Update and Windows Search won't work. Does anyone know where to get the MS drivers to fix this?
i installed a new seagate 2TB internal hard drive and now Windows Update and Windows Search won't work. Does anyone know where to get the MS drivers to fix this?
I have attached a Seagate 500 GG external hard drive to my computer but it is not showing up in My Computer.I have browsed similar threads and on their advice gone into Device Manager.The drive is there but with no letter assigned to it but when I right click to assign one, it refers me to Windows Help, which is unable to solve the problem. There are actually two extra ikons in Device Manager - one marked FAT Healthy (EISA Configuration) and the other just marked (GPT Protective Partition).The device is acknowledged as working properly in Device Manager.The files on this drive were created on a Mac, which may be the source of the problem? Most of them I will therefore not be able to read, but there is one which is a .mov file which I should be able to read and hopefully copy - if I can access it.Is there any way I can access the drive via my PC (Windows XP) or will the drive have been formatted for Mac only and therefore is inaccessible via PC?
I have tried to use this IOMAX USB 2.0 to SATA/IDE Adapter Kit with Power: Amazon.co.uk: Electronics to connect an old 250 gb Samsung sata hard drive to my PC.Windows won't recognise it as a hard drive/partition - the USB adapter device is recognised, and via Devices & Printers, it shows the drive, but not as a USB External Drive, (see image) so I cannot access it.
I have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
i am trying to connect my internal harddrive for my dead laptop via a usb port of a working one, but i get the message that the device is not recognized
Here's my hard drive: Seagate Constellation ES ST3500514NS
I haven't been able to get Windows 7 installation to detect this drive for about two months now. I'm running on a Gigabyte GA-880GA-UD3H mobo, revision 2.1.
I recently found a list of drivers for my motherboard on Gigabyte. I also found some downloads for my hard drive.
Oh, and I can use this drive if I'm running Windows 7 on a different hard drive, but I just can't install Windows 7 on it.
I have had xp for a long time on a custom computer. Recently I contracted a virus (namely the xp antivirus 2012 system virus). I decided to reformat the hard drive, as I do not have the original xp discs, I bought windows 7 (the full version, not upgrade). While trying to install windows 7 and subsequently reformat the hard drive, the installation program can not detect any hard disk whatsoever.
Another problem is that the virus has corrupted my computer to the point where I cannot even load xp. All my computer is currently good for is watching it try to load.
I am getting 2 error messages. chronically I get filedeviceHarddisc volume 3$Mft. like every 10 minutes. The other is E:vlc-1.0.5-win32exe. I reinstalled the vlc program and haven't seen that error message for awhile. I checked the hard drive with seagate and it is functioning properly.
So my trusty old 40 GB Maxtor HDD finally died, and I'm trying to install Windows 7 on a 250 GB Western Digital Caviar SE 16 (SATA II). Windows will boot off of the DVD, load the setup, ask me if I want to perform an install or a repair, and then it asks if I want to upgrade or do a "custom" setup. I choose custom since it's a clean drive, but then it shows me a blank list of drives with the option to load a driver. My motherboard is a Gigabyte GA-G41M-ES2H, so I went to Gigabyte's website and downloaded the drivers and put them on a USB thumb drive. I spent hours trying to load different drivers to no avail. I tried the CD that came with the motherboard; no dice. I tried 32 and 64 bit installations; neither worked.
But you know what did work? My 180-day trial copy of Windows Server 2003. It detected that hard drive like Western Digital made it just for 2003.
I have this WD My Passport external portable harddrive which I have used for a couple of years. I was writing something to the drive one day when the USB connection seems to be somewhat loose and the drive disconnected momentarily and reconnected itself but the file I was trying to write ended prematurely...Now when I try to use the Seagate Harddrive test tool for windows and do a Short Generic test and the result failed.. I am fear it might have been caused by the disconnection and might eventually corrupt the entire drive... I try to run chkdsk but there aren't any errors detected it seems and files seems to be accessible as normal... Is there a way to fix the harddrive without losing data in the drive or confirm the drive is indeed failing?
Yesterday, I just reinstall fresh windows 7. After I install the OS, I just realize that my recycle bin is empty. Before I installed windows 7, some of my deleted files on my other hard disk is there. But now, I could not find it anymore. After that, I tried to select show hidden folder, files, and drives and unsellect hide protected operating system files on folder options. I try to browse to one of my hard disk, which has the deleted files on recycle bin before, then I found it the recycle bin icon there as well (For instance, the path of the drive is: N:$RECYCLE.BIN). I tried to look at the properties, and I found that the missing size of the deleted files was on there. The problem is I cannot access it. When I tried to open the recycle bin, it just empty. I need some help with this. How do I retrieve the files again to the OS recycle bin, not the hard disk recycle bin? Is it possible to access it again? I really need those files back.
On my old secondary computer my setup was Motherboard: Chaintech VNF2-350 Master 0: HDS722516VLAT80 with Windows installation Slave 0: WD800BB-53CCB0
But then I started getting Machine Check Exceptions and my motherboard ultimately perished. So I replaced that with a Foxconn K8S755A-6ELRS. But this new motherboard won't detect the hard drive.
It will hang at the part that says "Detecting IDE drives", sometimes it will give up and display "0" where the drive is supposed to be, other times it will hang until you unplug the cable.
If it's on the same channel as the Hitachi drive with XP on it, the BIOS recognizes the other drive, but fails to boot from it. If they are on different channels, it boots the XP drive but will see no hint of the drive on the other channel., even in Disk Management or Device Manager.
I also tried connecting it to my other computer's Intel DP35DP mobo, and it was able to detect/read/write and all that, though it does have a few bad sectors.
Recently I change my Os from windows vista to 7. Because I can't find a way to make the original OS to become genuine.From there, my laptop can't read external hard drive but it can only read flash drives.I don't know what my laptop is missing, if it is updates or drivers.
Got a virus in my old drive. I bought a new drive and tried to install Windows 7 on it and slave the old drive so to pull files off I wanted, and then format the drive. This did not work. All I get is the Windows blue screen with the dove on it, and no desktop.
