External Hard Drive Image Failed
Nov 1, 2009
I have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
View 3 Replies
ADVERTISEMENT
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Feb 26, 2012
I have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
View 1 Replies
View Related
Oct 23, 2011
I Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
View 2 Replies
View Related
Jan 21, 2012
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
View 9 Replies
View Related
Oct 23, 2011
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Feb 27, 2012
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies
View Related
May 11, 2012
how can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies
View Related
Jun 29, 2012
can u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies
View Related
Apr 20, 2011
I have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies
View Related
Mar 17, 2012
I bought 2 new 3Tb Seagate Expansion drives model STAY3000300.I tried to "Create a system image" and both 3Tb drives were presented as possible destination discs. I selected one of them and after a couple of messages about preparing and starting the following message was displayed. (same message on the other 3Tb drive as well)The backup failedBIG RED BAROne of the backup files could not be created.(0x8078002A)Additional Information:The request could not be performed because of an I/O device error, (0x8007045D)The system is Windows 7 64bit and bang up to date with Windows update. The system disc is a OCZ Agility 3 120Gb SSD.Another strange thing is I have been doing backups to another external disc for many months - a 1Tb Iomega portable external.The MAIN BU file is about 26Gb and, yes, all my discs are formated as NTFS so it is not a file size issue.
View 7 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Jan 4, 2013
I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies
View Related
Dec 22, 2011
I am running windows 7 64 bit, on an eMachines lap top, I have purchased an external HDD and now I am trying to create a perfect copy of my system. I used DriveImage XML but it failed. I have used this program in the past with great success on a different computer running WindowsXP.The failure I get is "failed to lock drive". I've tried skipping the lock drive option and going straight to shadow copy; same problem.I can only assume the failure to lock drive is based on permissions and files being in use. So I think I need to attempt this without loading windows. Is there anyway of running a "free" drive cloning program from a DVD or USB Flash drive without booting into Windows?I would just bit torrent a win7 OS, install it on my external, and run the program from their, but I don't want to have to resort to law breaking, and I have never run linux.
Also I tried using a "backup" feature on Paragon Partition Manager, it did "backup" the system, but it didn't clone the drive. All the backup files are written in directories such as "C:/archive/" and thus I assume there is no way of booting into a system written that way. I assume it's like windows system restore, and what I need is a bootable image of my primary drive.Oh and I should clarify, that it's not my external drive that fails to lock; the external HDD has been formatted, partitioned, and can read and write data just fine, and has way more than enough room to copy the HDD in my lap top.Also, the HDD on my lap top has 1 primary partition, with two logical partitions. I have no idea what the logical partitions are for and if that could be causing the problem.
View 8 Replies
View Related
Jul 3, 2012
I had a striped hard drive set up because I thought it was cool to make 2 500's a 1 tb. it broke. but now one of em went off the reservation and now wants to be a cd drive after reformatted the drive that was working.can't see the errant drive in disk management but in computer (windows 7, custom build) it's my new cd drive witch claims to be my H: drive.
View 3 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Nov 13, 2012
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies
View Related
Apr 12, 2012
I am stack at certain process while trying to load a system image onto new hard drive using Windows 7 x64 image restore function from the windows 7 disk, I got my primary drive 500 gigs with windows 7 and all my files,I made a system image onto another clean internal hard drive size 160 gigs and I was successful, now I disconnected my 500 gigs primary hard drive, attached a new 250 gig hard drive and I proceeded to load the system image, I boot to windows 7 cd,I get the option to repair , click on restore from system image file , everything looks good computer finds the hard drive 160 gigs with the system image as source,I press next look for the target drive and I see it there 250 gigs drive thats freshly formatted ..., I select the target press next it all looks good and then I get the screen that there is no target hard drive... I made sure that this hard drive is not being excluded from format and new process... I am lost ... what am I doing wrong here, I reformatted those 2 drives twice I tried this operation about 8 times , I get the error message each time I am attempting to create this new system image..
View 9 Replies
View Related
Nov 7, 2011
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
View 1 Replies
View Related
Jan 8, 2013
My former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
View 10 Replies
View Related
Jun 16, 2012
I have raid 5 setup, on a ASUS P5K WS motherboard using matrix storage manager. Just copied everything on to it, now a hard drive has failed. I got new hard drive but its seen as none Raid and raid showing as failure ?
View 3 Replies
View Related
Jan 27, 2012
It's time to format my hard drive. It hasn't been formatted since 2008 when it was bought and it's having some major issues.I made a system image. when i was installing it, I couldn't check the option to "get rid of the partitions and format the hd". It requested the drivers, asked me to insert the disc, but I don't have any disc with the drivers
View 12 Replies
View Related
Dec 10, 2011
I have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
View 14 Replies
View Related
Jul 28, 2012
Would like opinions on preferred easy full image back-up apps.
View 2 Replies
View Related
Nov 10, 2011
I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.
View 1 Replies
View Related
Apr 24, 2012
I've backed up Windows through the official Windows Backup tool (in the Control Panel) to a hard drive (actually, a second partition). It takes about 8-12 GB (don't remember correctly). Then, right after that, I chose to make a backup also on a DVD, and, surprisingly, one DVD was enough! First of all, it's weird that it could fit into one DVD while if I tried to burn the files form the backup on the hard drive, I would need at least two. And then the second thing: the files on the DVD all take about 3.4 GB. I tried making an image of it though Alcohol 120, and the MDF file takes about 3.4 GB. ImgBurn couldn't make an image, because it's a multiple session DVD. So why is there such a difference in size between system images backed up to the hard drive and a DVD? Can I trust a DVD?
By the way, I tried creating backup with Arconis True Image (I don't remember true name) and Norton Ghost 15 to a hard drive, and their images take about 3 GB. So if the real size of my system image is about 3 GB, then why did Windows backup on HDD take so much place?
It's Windows 7 Ultimate 32 bit, by the way.
View 4 Replies
View Related
Jul 19, 2012
Not exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
View 9 Replies
View Related
Jan 11, 2013
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies
View Related
Jun 25, 2011
I can see my external hard drive in device manager, but not in my comp
View 3 Replies
View Related