I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
View 1 Replies View RelatedMy laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional
I am trying to create a system image ready for installing a larger HDD (WD20EARX), but when using the Windows 7 wizard, the drive, Buffalo 500 USB External HDD, is not in the drop down selection box. The drive is there OK and can use it OK for normal work and there is over 450GB available. My original HDD is 160GB.
View 3 Replies View RelatedI've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
View 4 Replies View RelatedOn hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies View RelatedMy problem is if I restart with HDD on,it freezes when windows logo pops up during startup. I have a bunch of saved stuff on the external besides the backup img.Its a 500gb.It still froze when I only had 10gb saved on it. Will it delete everything I have saved on my external if I boot the img? I have a extra 20gb laying around,it is large enough to hold my saved backup.
View 2 Replies View RelatedI recently installed an SSD in my laptop and moved the HDD to the secondary drive (I have room for two). I did a few of the prescribed steps for optimal SSD usage (moved user profiles to HDD, moved temp directory and page file, etc). Initially I was able to image only my C drive (about 30GB required). This was when I could still dual boot to my original partition on the HDD.
I've since removed the old Windows 7 install from the HDD and made it a single partition. However, now when I try to make a drive image I'm unable to deselect my HDD when creating an image. I'm given no option except to create an image for both drives with a resulting size of 209GB. I'm already backing up my user data already and don't want to include it in the image.
When I view the disk manager my HDD (drive E) is Disk 0 and my SSD (drive C) is Disk 1. I've run bcdboot c:windows /s c: to ensure I have the boot files on my SSD. I'm able to boot my machine on the SSD if I disconnect my HDD but it doesn' like that my profile isn't available. I've also tried to change the disk order in my laptop BIOS but I don't have the option of changing the order of the individual disks.
What I want to do is be able to do is image only my SSD and not the entire system. I also want to do it on a regular basis and avoid having to open up my laptop and disconnect the HDD.
Is this related to the order of my disks in the disk manager or is that just a red herring? How do I make it so I can only select the SSD when creating a disk image?
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
how can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedI have an external enclosure. Could anyone point to me where to go and read in point blank detail step by step how to:
1. Make a mirror image backup copy of the pc hard drive including partitions and the OS..
2. How to set it in such a way that I could save the eventual changes produced in that backed up copy by doing in future just an incremental back up each time (of only what has changed since the previous backup).I am running Windows 7 Home 64-bit.
I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.
Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?
I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.
So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.
This backup would be very helpful, I just never looked into it until now.
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
View 4 Replies View RelatedI have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?
View 3 Replies View RelatedI have a 1TB external hard drive that I will use to make a Backup Image. I'm going to Use Symantec Ghost to make a backup Image.Should I partition the External hard drive first? I would also like to use it to store other files and folders. If so, how big should the partition with the backup Images be?How large is a typical Image backup file? I also plan on backing up 2 other linux machines.
View 7 Replies View RelatedI'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies View RelatedI'm trying to find the best way to
1) create a disk image for disaster recovery
2) synchronize folders and files to protect against accidental deletion, erroneous save-overs, transferring to another computer, etc.
I have a 1 Tb external hard drive which is plenty of space for me to use for both.Can be either one program that performs both functions, or two separate programs. I don't want automatic backups, since I plan to store my external drive in a fireproof safe soon. I need the sync'd files to be browse-able (not contained in a single image file)...just like a flash drive basically. I would like something that only backs up new files or ones that have been changed (to cut back on backup time...but maybe this is standard for syncing and mirroring programs. ??) Needs to be able to handle long file names A nice GUI Cost - free to low (I'd pay up to $30ish...but free would be great) I was thinking of using Windows 7 Backup & Restore for the disk imaging, and then SyncToy for the file/folder syncing...but is this the best option?
Would like opinions on preferred easy full image back-up apps.
View 2 Replies View RelatedI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
SSD boot drive failed after just 5 weeks. It takes me an entire weekend(at least) to reinstall and reset everything. Not to mention lost saved passwords and some other important data that I did not get backed up which leads me to my question. Can I use my Last Windows Image backup to install on the new boot drive and if so how?
View 2 Replies View RelatedI have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies View RelatedI Image my C drive on the 2nd partition of the same drive. I then copied the image to an external drive. If I lose my drive that my C drive is on and then replace it with a new drive can I Image from my external drive to the new Hard drive and it will be the same size and make? The reason for this question is my image will be coming from a different drive than it was image to.
View 2 Replies View RelatedI have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
I have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
I'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.
The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.
My external backup drive is a SimpleTech StorageSync unit used with an XP OS. I recently purchased a Dell 64 bit desktop. Can I just connect the backup drive to the new PC or should I make other adjustments?
View 4 Replies View RelatedI have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
View 1 Replies View RelatedWindows backup is set up to not allow backups onto the C drive (or whatever drive windows is installed on), which generally makes sense. But I have a C drive with a lot of empty space, and an external hard drive that I need to back up. So... is there any way to get around the default behavior so I can back up FROM the external drive TO the C drive?
View 1 Replies View RelatedI am running "windows backup and restore" on one of my external hard drives and WDsmartware (western digital software that came with my other external drive). WDsmartware eats up WAY to much resources. Would I be better off just using "windows backup and restore" for both drives? are there any free programs out there that are "better' than windows 7 "backup and restore"?
View 5 Replies View Related
