Windows backup is set up to not allow backups onto the C drive (or whatever drive windows is installed on), which generally makes sense. But I have a C drive with a lot of empty space, and an external hard drive that I need to back up. So... is there any way to get around the default behavior so I can back up FROM the external drive TO the C drive?
View 1 RepliesI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View Relatedcannot backup d: drive or external drive f: both come up with the same message have tried chkdsk c: /f and chkdsk /x a no goer
View 1 Replies View RelatedI'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.
The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.
My external backup drive is a SimpleTech StorageSync unit used with an XP OS. I recently purchased a Dell 64 bit desktop. Can I just connect the backup drive to the new PC or should I make other adjustments?
View 4 Replies View RelatedI have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
View 1 Replies View RelatedI'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies View RelatedI am running "windows backup and restore" on one of my external hard drives and WDsmartware (western digital software that came with my other external drive). WDsmartware eats up WAY to much resources. Would I be better off just using "windows backup and restore" for both drives? are there any free programs out there that are "better' than windows 7 "backup and restore"?
View 5 Replies View RelatedI'd like to automatically backup certain folders to an external hard drive every time it's plugged in. I've tried Windows 7 Backup tool but it creates an icon and I would like the folder to be able to be navigatable (for the reason that I need to know what has been backed up and what hasn't, also I don't want to restore an entire folder at times, sometimes I just want to restore a couple of files).
How can I make this happen? Using either Windows 7 backup or another tool
I am acquiring a 1.5TB external drive. I will be basically have a single 1.5TB file on this drive. It will be a Truecrypt encrypted archive.
Given that the entire hard disk will be occuppied with one huge file, what is the best way to format it? Is NTFS still the way to go? Does it make sense to increase the cluster size above the 4KB default?
I am concerned about both performance and not wasting space, but the performance is the lesser concern.
I'm looking for an external hard drive to backup all of my documents that can do the following:Say I have the hard drive already. I have all of my documents on my laptop and a copy of each of them in the hard drive. When I finished writing a new document and plug in the external hard drive, the hard drive will automatically detect that I have a new document and will make a copy of that document in the external. The hard drive will also automatically copy and replace any new version of the existed older documents.
View 6 Replies View Relatedhow do i move my backup files from my external hard drive called a network to my pc
View 1 Replies View RelatedI have a networked shared USB connected HD on PC 1 that works fine on PC 1. However when I tried to setup MS Backup for the first time on PC 2, it does not list the external HD called Drive "L". When I open COMPUTER on PC 2, the external drive is shown. Drive "L" is also set for ALL USERS, and shared label is indicated on PC 1. So the million dollar question is, why doesn't it show on the list of available drives to select for backup on PC 2? Also, there isn't any way in the backup setup screen to browse or search for any drives.
View 1 Replies View RelatedI bought 2 new 3Tb Seagate Expansion drives model STAY3000300.I tried to "Create a system image" and both 3Tb drives were presented as possible destination discs. I selected one of them and after a couple of messages about preparing and starting the following message was displayed. (same message on the other 3Tb drive as well)The backup failedBIG RED BAROne of the backup files could not be created.(0x8078002A)Additional Information:The request could not be performed because of an I/O device error, (0x8007045D)The system is Windows 7 64bit and bang up to date with Windows update. The system disc is a OCZ Agility 3 120Gb SSD.Another strange thing is I have been doing backups to another external disc for many months - a 1Tb Iomega portable external.The MAIN BU file is about 26Gb and, yes, all my discs are formated as NTFS so it is not a file size issue.
View 7 Replies View RelatedCan you backup installed applications to an external hard drive, then restore them to another Computer without Reinstalling them? For example, My computer Windows 7 Home Premium has many softwares, applications, programs, utilities, etc. That I purchased and don't want to Reinstall them on new computer. Is it possible for them to work without Re-entry keys?
View 9 Replies View RelatedI am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View RelatedLast week I've reinstalled my Windows 7 because my notebook was slow and I wanted to went back to the factory setting. I've picked my Seagate external HD (2TB) and moved everything I had into a folder called "[Acer]".
Well, I had some problems with external hard drives this year, I've lost many information from an external HD, and I found out that it was because I've connected this HD in a Macintosh. I really DON'T KNOW WHY, but every folder that I had opened in my Macintosh went CORRUPTED in Windows 7, with no chances to repair the files.
Since then, I haven't plugged my external hard drives into my Macintosh.
I don't know if it's a Windows 7 problem or a problem with my Seagate HD, but the quantity of issues that I had with this external HD since then was crazy. Every time I disconnected this HD and then connected again, Windows asked me to repair and scan the files. And the amount of time to scan everything was, like, one and a half hour... so it was bugging me a lot. But the real problem is: yesterday I've plugged my external HD and my backup folder (called "[Acer]" simply disappeared from the drive. I've tried to run "chkdsk E: /F", with no success.
Now I'm running a "chkdsk E: /R", and it will take me a lot of time, and I'm really not positive to recover my backup folder.
All the old folders are there, everything is fine, but this folder disappeared, only this folder (and everything that were inside of it) disappeared.
I've also tried Recuva (Recuva - Download) to recover my folder, but it haven't found it.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI am asking this question since this is my first compter with an SSD primary drive. I have a 120gb ssd primary and a 3TB mechanical split into 2 partitions 1 500gb for apps and the rest is storage. I want to reformat my Windows installtion drive. But what i'm curious about is how is this going to effect the apps i have installed on the mechanical drive. Will this cause issues with windows references not running the apps properly.
View 5 Replies View RelatedMy SSD main drive is running low on space .My motherboard supports 2, SATA3 connections.My current drives are SATA2 SSD main drive and a SATA3 1TB media drive.If I were to add 2 SATA3 SSD's in RAID, does that use up both the SATA3 ports on the motherboard? or do they just combine and use 1?
View 1 Replies View RelatedMy former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
View 10 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedWhy do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
View 6 Replies View RelatedWhy do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
View 3 Replies View RelatedI am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies View Relatedi got a new processor, the o.c software and teh bios filed to set on auto, so i had to do it manually..over and over and over and over again. around 8 am i started to tweak the setting on the o.c software and in my slep deprived state i did something very stupid..i set the o.c software to load the last setting on startup.afterward i hit a setting the crashed the computer, so now i can't boot it, cuase the o.c software is loading those com crashing setting on startup. so i when to use a back up harddrive which was empty, so i am now using teh computer with a fresh hdd. the other hardrive is as it was when i screwed up royal.all ihave to do is load internal harddrive on my external hdd dock, in a virtualized environment which i looked for help threw google, which lead me to virtual box..which was 3 hours of wasted time, then i ran another search which lead me here eventaully, which referred me VMware, so i went to VMware only to find a god awful amount of crap i don't need and getting support from them was a joke, put in a ticket and await..wait..wait..wait, two hours later , i come back here. i had no idea what api from VMware to go and get most of it seems like its meant for servers, and im not running a server.i have a hdd thats good, in a external dock, i can load its internal working threw my computer, but i need it virtaulized in order to uncheck that box in the o.c software so it doesn't load on startup, thats it >.<
View 1 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedI have a Windows 7 Professional 32 bit operating system, which is joined to a domain at my workplace. If i open Eindows Explorer and open a network drive ( I: ), then the Windows Explorer open's it, but after a few seconds later, it jumps back to the main page. It is very annoying. I have 11 network drives, but only on two networks drives occurs this problem.
View 4 Replies View RelatedI don't have Windows 7 yet, but I'm just about to install it, but I figure it may be safe to do a back up first. I'm about to do an upgrade from Vista 64-bit to Windows 7 64-bit. I did find these recommendations:"An image backup of your hard drive offers an easy, dependable way to do just that, since it restores everything on the hard drive: Windows, applications, data, and even the Master Boot Record. To create one, you'll need an external hard drive, and an image backup program.
View 1 Replies View RelatedI have an external western digital HD which is 2x 500gb sata drives that mount to 1tb, I assume there bridged to make the 1 TB possible my question is that ive decided to put these in my pc case(couldnt do it before) as media drives etc, I put both in, but my pc only sees the one 500gb drive is there anything I can do for me to see both.
EDIT also ive just noticved I can actualy see the non working drive in BIOS.