Backup External Drive Seen By My Computer, But Not Backup & Restore
May 25, 2012
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies
ADVERTISEMENT
Oct 21, 2011
I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.
View 4 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
Aug 23, 2012
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
View Related
Aug 8, 2009
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies
View Related
Oct 1, 2012
I'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.
The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.
View 3 Replies
View Related
May 15, 2012
My external backup drive is a SimpleTech StorageSync unit used with an XP OS. I recently purchased a Dell 64 bit desktop. Can I just connect the backup drive to the new PC or should I make other adjustments?
View 4 Replies
View Related
Oct 10, 2012
I have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
View 1 Replies
View Related
Feb 25, 2011
i meet a problem, some of my hardware are old and needs upgrading, but i don't want to reinstall the system and my applications, My system is windows 7.
View 1 Replies
View Related
Jan 19, 2012
I am running "windows backup and restore" on one of my external hard drives and WDsmartware (western digital software that came with my other external drive). WDsmartware eats up WAY to much resources. Would I be better off just using "windows backup and restore" for both drives? are there any free programs out there that are "better' than windows 7 "backup and restore"?
View 5 Replies
View Related
Dec 21, 2012
I'd like to automatically backup certain folders to an external hard drive every time it's plugged in. I've tried Windows 7 Backup tool but it creates an icon and I would like the folder to be able to be navigatable (for the reason that I need to know what has been backed up and what hasn't, also I don't want to restore an entire folder at times, sometimes I just want to restore a couple of files).
How can I make this happen? Using either Windows 7 backup or another tool
View 2 Replies
View Related
Nov 8, 2009
I am acquiring a 1.5TB external drive. I will be basically have a single 1.5TB file on this drive. It will be a Truecrypt encrypted archive.
Given that the entire hard disk will be occuppied with one huge file, what is the best way to format it? Is NTFS still the way to go? Does it make sense to increase the cluster size above the 4KB default?
I am concerned about both performance and not wasting space, but the performance is the lesser concern.
View 8 Replies
View Related
Apr 17, 2011
I'm looking for an external hard drive to backup all of my documents that can do the following:Say I have the hard drive already. I have all of my documents on my laptop and a copy of each of them in the hard drive. When I finished writing a new document and plug in the external hard drive, the hard drive will automatically detect that I have a new document and will make a copy of that document in the external. The hard drive will also automatically copy and replace any new version of the existed older documents.
View 6 Replies
View Related
Feb 3, 2012
how do i move my backup files from my external hard drive called a network to my pc
View 1 Replies
View Related
Apr 17, 2011
I have a networked shared USB connected HD on PC 1 that works fine on PC 1. However when I tried to setup MS Backup for the first time on PC 2, it does not list the external HD called Drive "L". When I open COMPUTER on PC 2, the external drive is shown. Drive "L" is also set for ALL USERS, and shared label is indicated on PC 1. So the million dollar question is, why doesn't it show on the list of available drives to select for backup on PC 2? Also, there isn't any way in the backup setup screen to browse or search for any drives.
View 1 Replies
View Related
Mar 17, 2012
I bought 2 new 3Tb Seagate Expansion drives model STAY3000300.I tried to "Create a system image" and both 3Tb drives were presented as possible destination discs. I selected one of them and after a couple of messages about preparing and starting the following message was displayed. (same message on the other 3Tb drive as well)The backup failedBIG RED BAROne of the backup files could not be created.(0x8078002A)Additional Information:The request could not be performed because of an I/O device error, (0x8007045D)The system is Windows 7 64bit and bang up to date with Windows update. The system disc is a OCZ Agility 3 120Gb SSD.Another strange thing is I have been doing backups to another external disc for many months - a 1Tb Iomega portable external.The MAIN BU file is about 26Gb and, yes, all my discs are formated as NTFS so it is not a file size issue.
View 7 Replies
View Related
Dec 10, 2012
Can you backup installed applications to an external hard drive, then restore them to another Computer without Reinstalling them? For example, My computer Windows 7 Home Premium has many softwares, applications, programs, utilities, etc. That I purchased and don't want to Reinstall them on new computer. Is it possible for them to work without Re-entry keys?
View 9 Replies
View Related
Jan 4, 2013
I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies
View Related
Nov 22, 2008
How to Create a System Image Backup in Windows 7 ?
View 0 Replies
View Related
Feb 2, 2011
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?
View 8 Replies
View Related
Feb 2, 2011
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.
View 3 Replies
View Related
Jul 24, 2012
I was wondering if this would work as a poor man's backup system for Windows 7.
1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).
2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.
Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??
View 2 Replies
View Related
Jan 17, 2012
I was running windows seven and my HD started failing so I bought a new one and had it shipped in. After recieving it today I backed up my old HD on to a My Passport I had lying around created my repair disk and set out to restore my new blank HD. When I got to the startup and repair menu I clicked restore from image and my computer scanned and could not find an image to restore from. The external is plugged in and I can see the backup files when it gives me the option to look for drivers but it wont recognize the external to let me load the files from it.
View 2 Replies
View Related
Nov 16, 2011
Last week I've reinstalled my Windows 7 because my notebook was slow and I wanted to went back to the factory setting. I've picked my Seagate external HD (2TB) and moved everything I had into a folder called "[Acer]".
Well, I had some problems with external hard drives this year, I've lost many information from an external HD, and I found out that it was because I've connected this HD in a Macintosh. I really DON'T KNOW WHY, but every folder that I had opened in my Macintosh went CORRUPTED in Windows 7, with no chances to repair the files.
Since then, I haven't plugged my external hard drives into my Macintosh.
I don't know if it's a Windows 7 problem or a problem with my Seagate HD, but the quantity of issues that I had with this external HD since then was crazy. Every time I disconnected this HD and then connected again, Windows asked me to repair and scan the files. And the amount of time to scan everything was, like, one and a half hour... so it was bugging me a lot. But the real problem is: yesterday I've plugged my external HD and my backup folder (called "[Acer]" simply disappeared from the drive. I've tried to run "chkdsk E: /F", with no success.
Now I'm running a "chkdsk E: /R", and it will take me a lot of time, and I'm really not positive to recover my backup folder.
All the old folders are there, everything is fine, but this folder disappeared, only this folder (and everything that were inside of it) disappeared.
I've also tried Recuva (Recuva - Download) to recover my folder, but it haven't found it.
View 5 Replies
View Related
Nov 1, 2010
Is there a way to use Windows Backup to backup to a network drive?
View 6 Replies
View Related
Jan 5, 2012
Windows backup is set up to not allow backups onto the C drive (or whatever drive windows is installed on), which generally makes sense. But I have a C drive with a lot of empty space, and an external hard drive that I need to back up. So... is there any way to get around the default behavior so I can back up FROM the external drive TO the C drive?
View 1 Replies
View Related
Jul 1, 2012
cannot backup d: drive or external drive f: both come up with the same message have tried chkdsk c: /f and chkdsk /x a no goer
View 1 Replies
View Related
Jul 4, 2012
I am wondering if there is a way for me to set up my computer in the following manner:
C: <- Main Boot Drive (60GB SSD)
D: <- Copy of Boot Drive (60GB SSD)
E: <- Program Drive (1TB HDD)
F: <- Storage Drive (2TB HDD)
G: <- Download Drive (500GB)
I have done the separate program and storage drive before, but I was wondering if perhaps a way to back up my boot drive without necessarily raid. It was brought to my attention that if something were to go wrong with the data then raid would automatically copy it (which makes sense), or am I worrying to much?
View 2 Replies
View Related
Nov 7, 2012
I would like to come up with a way to provide a full backup computer to my customers (offline, process control application). Currently doing this with WinXP and a hot-swap RAID-1 enclosure. If anything in computer1 dies, can quickly move the cables and the drive over to computer2, boot up and keep running. Now moving to Windows 7, more strict activation issues. Getting a separate windows license for each computer is not a problem, but how to either change the license key easily after the swap, or avoid activation altogether? Typical system is offline, possibly abroad and would like to make the failover as easy as possibly for customers.
View 9 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Aug 26, 2012
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies
View Related