I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 RepliesWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedI created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedThe hard drive failed on my friend's Win 7 laptop. I replaced the hard drive, now I am in the process of recovering documents that he had backed up on an external hard drive. He was using Windows Backup.When I start the application in restore mode and direct it to the external hard drive, it shows a backup done on Jan 2. But when I browse through the backup folders using Windows Backup, it does not show any of his recent files. I went ahead and restored the folders, but the most recent files in the restored user folders are only from mid November
View 9 Replies View RelatedI recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies View RelatedI'm trying to restore files from a Vista backup into 7, but, once they're restored I can't find them.
It only affects files that were in the various 'my documents', 'my downloads' etc folders on my Vista install - files from other partitions etc restore fine.
It seems as if the files are definitely being restored somewhere, because if I restore them again I get 'would you like to overwrite these files' dialogs. I've tried searching for the filenames after they're restored but they don't appear. I think maybe it's possible that 7 is restoring them under a different user (although my user name on 7 is the same as it was on Vista).
how I can restore a backup I made in Linux? Before I installed mac os x on my pc, I made a backup of everything on my hard drive via Linux but I had one error of copying a file. When I successfully installed mac os x, I installed Windows 7 on my other partition also successful. But then I deleted everything on that partition and just pasted my backup there => now windows won't boot. Has anybody got a solution so I won't lose all my settings and programs?
View 1 Replies View RelatedBackstory: My computer decides to crash on me while browsing some site, and it failed to startup after that. After many tries of getting it to work through system restore/system repair, it still would not load up. I then see an advanced option of restoring to the system default, with an option of saving all personal data such as files and documents. After this successful reinstall, I have a huge folder (190 gigs!) worth of my old files sitting in a folder named 'Backup' in the C: drive, all on a fresh version of Windows 7 (ie: default programs and icons like internet explorer). I have tried running Windows' Backup and Restore application, but the aforementioned backup drive does not show up. Is it possible to transfer everything back?
tl;dr: restored old comp to system default, (with an option to save personal files/programs, all in a new folder C:/Backup) but can't figure out how to move/replace this system default back to my old setup.
Sandy did damage my computer, either the MB or the CPU (Intel i5-760) is fried. At this point, it is not known, if my drives bit the dust as well. There are backups on the external drive, both Windows and Macrium images.The system being built has different MB and Intel i5-3350P CPU. This is an "unplanned" system hardware update and no preparation had been made for the Windows 7 drive for the migration.
View 9 Replies View RelatedI'm trying to restore files from a Vista backup into 7, but, once they're restored I can't find them.
It only affects files that were in the various 'my documents', 'my downloads' etc folders on my Vista install - files from other partitions etc restore fine.
It seems as if the files are definitely being restored somewhere, because if I restore them again I get 'would you like to overwrite these files' dialogs. I've tried searching for the filenames after they're restored but they don't appear. I think maybe it's possible that 7 is restoring them under a different user (although my user name on 7 is the same as it was on Vista).
Is there any way I can view these files?
My laptop was stolen recently. However, I was lucky to have a back up (old, really old) that I can use to recover at least some of my data.I now have a new laptop and I restored the backup on it. However, I created a user name different from the two that are on the backup. If I now create the two users, will they automatically be linked to the files that were restored? Alternatively, is there a way to link all files to the new username?
View 4 Replies View RelatedI had my Vista computer's hard drive crash! Fortunately I have a full back up of my data. Purchases new computer with Windows 7 64 bit O/S. A couple of data transfer issues:
-How do I transfer my favourites from backup to the Explorer 9 favourites?
-How do I transfer my old e-mail messages to a new e-mail programme.
I backed up all of my data files over to a CD/ROM before restoring my Windows 7 PC due to a hard drive failure.
After successfully restoring the Windows 7 PC, I also restored my backed up files from the CD/ROM using HP RecoveryMgr, which was included as part of the backup process. Then I see all folders show "This folder is empty", even though the folder "Properties" show that the folder is not empty and contains files being backed up during the restore.
How can I make the files in the restored folders visible/accessible again?
I have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI had windows 7 home premium free upgraded from Vista home premium.
1. The setup stored in D partition is whether win 7 or Vista. how can i confirm?
2. Recently i was creating system image but due to unavailable more blank dvd i could not completed and i had to interrupt after a single dvd disk. and again next day when i am trying to make system image, i could not getting any option at Backup and Restore folder in control panel. Pls advice.
My system info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4063 Mb
Graphics Card: NVIDIA GeForce GT 130M, 1024 Mb
Hard Drives: C: Total - 466843 MB, Free - 317496 MB; D: Total - 10091 MB, Free - 1408 MB;
Motherboard: Quanta, 361B
Antivirus: Microsoft Security Essentials, Updated and Enabled
I'm not exactly sure how the Backup and Restore feature in Windows 7 work. Does it backup only your operating system and important processes and certain programs, or does it also backup the data on your harddrive such as music, movies etc? Is this feature essentially the same as creating a recovery partition/disk ?
View 2 Replies View RelatedBefore buying a new Windows 7 computer I was using XP. Using the installed Retrospect 6.5 program I backedup all my files to an external hard drive.I can access the hard drive and I can see the backup file but cannot open it to restore my documents and settings.("no program associated with this file extension")The software that came with the Accomdata hard drive will not load in Windows 7.I searched the web for .rbc file" openers" but these all seem to be "commercial" programs (ie, cost money).
View 2 Replies View RelatedUsing the Windows 7 Backup and Restore feature I made a back up of my Documents folder and my Desktop (the only two things on my computer I care about). I did not check off the option "Include a system image of Drives: ---". After the backup completed I clicked on the JOSH-PC (backup file) the window saying "Choose an option below for the selected backup" came up. If I click "Restore my files from this backup" will it automatically overwrite my current Desktop and Documents folder with what is in the back up or will I have a choice as to where on my computer these files are restored to?
View 3 Replies View RelatedWindows 7 SP1 NTFS..I'm trying to create an image as I did with Norton's Ghost in XP and later when I used Norton's Save & Restore in Vista where the entire contents on my C: drive was backed up.In Windows7 Backup & Restore it's a little ambiguous where it saves in steps. I've viewed all options which are: I selected " Create an Image" on the left side of the first dialog box. This gives me these selections which are pre-selected and can not be changed: I don't want to do incremental backups where data is added automatically later. All I want is a one time only backup which creates an image of my entire C: with... Program Files, Registry, System Files, Boot sector, Partition table, etc..
View 5 Replies View RelatedI cannot seem to start the Backup program provided with Windows 7.I go to Control Panel and click on "Backup up your Computer" and nothing happens. What do I have to do to start the Windows 7 Backup program?
View 9 Replies View RelatedHas anyone tried to burn a System Image (with Windows Backup and Restore) onto a BD-R disk?I have 52.5 GB used on my C drive (Windows 7 x64). I have a clean install, with windows updates, and it would be phenomenal if I could use my WH12LS30 (LG) internal blu-ray burner for the System Image creation, since I only have 1 harddrive.When I try a BD-R (and this is my 1st try at System Image burn) , I see "The media needs to be formatted before it can be used...". Just didn't sound right to procede.
View 2 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
Is it possible to successfully backup and restore Windows 7 pro with the XP virtual disc installed with Acronis or similar programs? If so, are any special precautions required?
View 1 Replies View RelatedI cannot open the Win 7 Backup & Restore program, though it has worked OK in the past.I recently installed Spotmau Data Backup Kit and, thinking this might have affected the Windows program, I uninstalled it.
View 2 Replies View RelatedI am running Windows 7 [64 bit]. I have been using Windows backup, but it has stopped working and I am unable to open the programme from the Control Panel.
View 1 Replies View RelatedMy work laptop was being changed from a Dell to a Lenovo and I was using Windows Backup & Restore to backup my important documents and emails. I took a final backup to my external hard drive before handing my old laptop to IT. Once I restored all my files I noticed the following:
1. Some files were not the latest versions, i.e. they were a month old.
2. Some subfolders simply weren't there. I had two subfolder in one of my folders and only one was restored and not the other. I made sure that I restored from the latest backup file.
When I upgraded to Win 8 from Win 7 I imaged to my 2T usb drive with both of these programs.Is having two dissimilar programs going to cause any troubles?I always depended on Acronis but it seemed to be hard to install this time. They both check out ok with the discs.If 2 backups were a dependable move and did not cause a conflict, I would keep it as is.Should I keep the two or just one?
View 3 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI am trying to do my weekly back-up with the windows 7 system backup and restore, as I always use, and for some reason it is not longer responding, nor can I open the program to make any changes to the process.
View 7 Replies View Related