The hard drive failed on my friend's Win 7 laptop. I replaced the hard drive, now I am in the process of recovering documents that he had backed up on an external hard drive. He was using Windows Backup.When I start the application in restore mode and direct it to the external hard drive, it shows a backup done on Jan 2. But when I browse through the backup folders using Windows Backup, it does not show any of his recent files. I went ahead and restored the folders, but the most recent files in the restored user folders are only from mid November
I'm trying to restore files from a Vista backup into 7, but, once they're restored I can't find them.
It only affects files that were in the various 'my documents', 'my downloads' etc folders on my Vista install - files from other partitions etc restore fine.
It seems as if the files are definitely being restored somewhere, because if I restore them again I get 'would you like to overwrite these files' dialogs. I've tried searching for the filenames after they're restored but they don't appear. I think maybe it's possible that 7 is restoring them under a different user (although my user name on 7 is the same as it was on Vista).
Backstory: My computer decides to crash on me while browsing some site, and it failed to startup after that. After many tries of getting it to work through system restore/system repair, it still would not load up. I then see an advanced option of restoring to the system default, with an option of saving all personal data such as files and documents. After this successful reinstall, I have a huge folder (190 gigs!) worth of my old files sitting in a folder named 'Backup' in the C: drive, all on a fresh version of Windows 7 (ie: default programs and icons like internet explorer). I have tried running Windows' Backup and Restore application, but the aforementioned backup drive does not show up. Is it possible to transfer everything back?
tl;dr: restored old comp to system default, (with an option to save personal files/programs, all in a new folder C:/Backup) but can't figure out how to move/replace this system default back to my old setup.
I'm trying to restore files from a Vista backup into 7, but, once they're restored I can't find them.
It only affects files that were in the various 'my documents', 'my downloads' etc folders on my Vista install - files from other partitions etc restore fine.
It seems as if the files are definitely being restored somewhere, because if I restore them again I get 'would you like to overwrite these files' dialogs. I've tried searching for the filenames after they're restored but they don't appear. I think maybe it's possible that 7 is restoring them under a different user (although my user name on 7 is the same as it was on Vista).
I backed up all of my data files over to a CD/ROM before restoring my Windows 7 PC due to a hard drive failure.
After successfully restoring the Windows 7 PC, I also restored my backed up files from the CD/ROM using HP RecoveryMgr, which was included as part of the backup process. Then I see all folders show "This folder is empty", even though the folder "Properties" show that the folder is not empty and contains files being backed up during the restore.
How can I make the files in the restored folders visible/accessible again?
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
I recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
how I can restore a backup I made in Linux? Before I installed mac os x on my pc, I made a backup of everything on my hard drive via Linux but I had one error of copying a file. When I successfully installed mac os x, I installed Windows 7 on my other partition also successful. But then I deleted everything on that partition and just pasted my backup there => now windows won't boot. Has anybody got a solution so I won't lose all my settings and programs?
Sandy did damage my computer, either the MB or the CPU (Intel i5-760) is fried. At this point, it is not known, if my drives bit the dust as well. There are backups on the external drive, both Windows and Macrium images.The system being built has different MB and Intel i5-3350P CPU. This is an "unplanned" system hardware update and no preparation had been made for the Windows 7 drive for the migration.
My laptop was stolen recently. However, I was lucky to have a back up (old, really old) that I can use to recover at least some of my data.I now have a new laptop and I restored the backup on it. However, I created a user name different from the two that are on the backup. If I now create the two users, will they automatically be linked to the files that were restored? Alternatively, is there a way to link all files to the new username?
I had my Vista computer's hard drive crash! Fortunately I have a full back up of my data. Purchases new computer with Windows 7 64 bit O/S. A couple of data transfer issues:
-How do I transfer my favourites from backup to the Explorer 9 favourites? -How do I transfer my old e-mail messages to a new e-mail programme.
Any simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Ive done a clean install, and i previously backed up my Vaio. When i try to restore programs however, it wont let me do it. It says "your files have been restored" but also says " some program or system files were skipped because they cannot be restored to original location. To restore these files, try restoring the files again and select a different location." Which location do i chose so that the programs appear in my "all programs" tab?
I recently lost some files, so I did a system restore to a date that the files were intact to retrieve them. However, while the programs on the computer are now correctly set back to the system restore date, the files in question are still missing (at least partially). I'm curious is there exists a way to restore not the applications and system settings, but simply to restore old files, or if it's too late at this point. I suspect if I went to a professional they would be able to work some magic to restore the actual files, but it wouldn't be a standard procedure, and I don't have the funds right now to do so.
In more detail: I had XAMPP installed so I could do local testing before putting websites I was working on online. As such, the folder in which I kept all my local data for web development work was within XAMPP's 'htdocs' folder, which is where the local files needed to be stored so that apache and php could utilize them. However, since the install of XAMPP, i'd been having issues getting Apache to run - it worked occasionally, but would usually quit after a second of running each time I started it (that's a whole other issue though). In any case, because I couldn't figure out why Apache wasn't working in my XAMPP install, I decided, 'screw it, I'll give WampServer a try instead, and proceeded to uninstall XAMPP then restart the computer to get a clean slate before installing WAMP. Of course, I foolishly spaced the fact that all my local web development files were stored in the XAMPP files, and they were all deleted during the uninstall. So I proceeded to do a system restore to about 24 hours ago (the most recent system restore point). It seemed fine at first, until I tried to get my old web dev files back: I went to the htdocs folder in my now-restored XAMPP folder, but the old files were not intact! It seems that while XAMPP is back on my computer, all the files that were deleted during the initial uninstall were not restored. Specifically, and I can't for the life of me figure out why this would be, but the only parts that remained were the file structure (all the old folders where there, but not many of the files within them), Javascript files, and favicon image files. Everything else is still missing.
is there a way, within windows, to actually restore all those old files? Or due to the sequence in which the uninstall of XAMPP then the restore went, is it too late?
I have created a backup of files and folders and of system in Windows 7 using the built-in backup program. How can I restore only a few selected files without restoring all. I note they are zip files so i can't identify which files i want to restore.
what files Windows Backup backs-up except that it backs up your data files. Are Outlook .pst files included in that? If so, can i presume it will restore those files too?
I had a Windows 7 HP system that the motherboard was going out, so I sent it back. I did a reinstall of Windows 7 at first and it had me to back up my files to a drive, so I did. I sent it back and now I have my XP system. Can I retrieve those files from that external HD and have them on my XP system?
I had windows 7 keep giving me a blue screen more often than not. I decided to reinstall windows. All went well and I don't get any blue screens. Now most of my 500g drive is 2 files (windows.old and windows.old.000). Now I don't have any room to backup my computer. These 2 files take up about 300g. I went to my local computer store and they this is normal for windows 7 and the files just keep getting bigger as time goes on. They advised me that I should have at least 2T drive to keep running windows 7. So my question is, can I delete the old backup files because I'm only using less than 200g on an ongoing bases. My operating system tells me that I don't have backup setup and I don't have room to set it up. I would have just over 300g free if I could delete these 2 files.
For a few years my wife has resisted using any kind of backup solution � even the built-in Windows backup. She has simply made her own backups on the root of an external drive. She simply copies all the files she wants to backup into a folder with the same name as her computer. G:/COMPUTER_NAME/.
Well, yesterday, she decided to start using Windows backup to simplify her life.
I've used Windows backup for years, but when we set up her machine, I was unaware that she had this folder called "COMPUTER_NAME". Well, perhaps you've guessed, Windows backup created it's backup on the root of the drive, calling it "COMPUTER_NAME".
She cried for hours, fearing that 10 years of family photos she's taken are gone forever (they were saved in the folder "G:/Computer_name", but they were not part of her local computer files, and therefore, not saved in the "computer_name" backup file created by Windows).
My first thought was to use some Photo/File recovery program. But after sleeping on the problem, it occurs to me that perhaps the files aren't really gone, since the folder had the same name, perhaps Windows did not overwrite the directory's structure and files, though because the name of the directory and the name of the backup file are the same, the directory is simply not accessible.
best way to try and restore the directory (before trying photo/file restoration programs).
I purchased a larger external hdd for my Win 7 Backup. I would like to move or copy the existing Win 7 Backup/Restore files to the new external hdd to freeup the old external drive for other data. Do you just copy the Backup folders on the old hdd to the new drive? Strangely, the Win 7 Backup folders' properties show zero bytes. I have restored files / folders from the Backup files, so I know they are not empty.
i used windows back up last night and came down in the morning to see that a file on my computer, which was labeled the same as the back up, is missing, although should i use the search function, i can still run them, such as SC2 which was on there as well as alot of other important stuff?
I have Win 7 Home Premium SP1. For the past year and a half, I've been using the Win 7 backup about once a month without any problems. My hard drive is partitioned into drives C and D, and I back up onto an external hard disk, which appears as Drive I when connected. (The external hard disk is partitioned into drives G, H, I, but there is plenty of space on drive I).
In addition, more often, I back up my important data folders (using MS Synctoy) on a USB flash memory which appears as Drive F. Yesterday, I backed up to the flash memory. Then I did the Win 7 backup to my external hard disc, but I forgot to remove the flash memory from the USB port, which I always do. When the Win 7 backup finished, I got an error message from Windows Backup: "Windows Backup did not complete successfully. The backup completed but some files were skipped."
When I looked at "View Skipped Files", it said "Windows Backup skipped F:Music because it cannot be found on drive F:." (There is no "Music folder on drive F). So I took out the USB flash memory and tried Win 7 Backup again (twice). Same result. Then I shut down the PC for the night. This morning I turned it on again. Everything else seemed to be working. So I did Win 7 Backup with the same result.
I looked at "Restore all users' files" in the Backup Window, and there I see that I have only a folder called "Users" backed up from the C Drive, and only a folder called "Music" backed up from the D Drive. I have many other folders in these drives, and even these folders only show a small portion of the files in those folders on my PC. It also shows that there is an empty F:Music folder backed up. Just to remind you - there is no F Drive once I remove my USB flash memory.
Looking at "Manage Windows Backup Space" I see that on Drive I (the backup drive) I use 26.6 GB for Data File Backup, 95 GB for System Image, with 64 GB of free space on the drive. Since my C and D drives have a total of 74 GB used space, and I assume Win 7 Backup compresses files, these numbers look reasonable to me. Are my files backed up or not? Why the silly error message? My external hard disk seems fine, as best as I can tell.
I keep getting an error every time I run Windows Backup Utility: "Backup skipped backing up F:Recorded TV as it is on the backup target." What does this mean, and how can I get to stop skipping files?
As my Vista machine was failing I did a full system backup. I did not do a simple file backup. That machine is now dead. Now I need to move the files within the system backup to my new Windows 7 Home Premium 64 bit machine but I'm not finding any way to accomplish this.
My work laptop was being changed from a Dell to a Lenovo and I was using Windows Backup & Restore to backup my important documents and emails. I took a final backup to my external hard drive before handing my old laptop to IT. Once I restored all my files I noticed the following:
1. Some files were not the latest versions, i.e. they were a month old. 2. Some subfolders simply weren't there. I had two subfolder in one of my folders and only one was restored and not the other. I made sure that I restored from the latest backup file.
I keep getting an error when running a windows 7 backup. it backs up to a linux server on the network. network sharing is correct. At the very end of the backup it says some files were skipped. when i check on the linux server the hard drive is full of files so it has access so I don't think it is a network problem.
I had a look at the log files in "C:WindowsLogsWindowsBackup" at the file "Backup Files 2010-02-07 190008_error.txt". It says "Backup encountered a problem while backing up file C:WindowsSystem32configsystemprofileWebsites. Error: The system cannot find the file specified. (0x80070002)".
I have made a Library in my Library folder called websites containing website files.
I made a backup disk of different files and now certain Word documents on the disk and when loaded back onto the laptop show with the file extention .LNK and have a type as Shortcut. The laptop had to be wiped clean hence the need to use the backup.
I was reading yesterday that if I want to restore a file, I need to go to the file and right click and select restore. If the file does not exist anymore then one would go to the directory where the file originally was and select restore (or something to that effect). I have two disks and I want to save some important files from one disk to the other. I have always used Windows 7 Backup but now I am not sure I am doing the right thing. What would happen if my main disk crashed and there was absolutely no hope of salvaging it? Could I still restore from the back up made by Windows 7 Backup? I won't know the file names or directory structure if one disk goes down completely.
Every time I open a program it comes up windows explorer stop working. And how do I make a recovery from my back up files. System restore does not go back as far as three months, why?
We are a small office, 5 or 6 computers. Only 3 are every day computers, other 3 are "server", admin and extra computer. The three in use every day are new win7pro x64 machines. Our server is xp pro (32bit) with a shared drive as our "server" drive. We access this for all our job related materials, etc. There is no network setup, just shared folders among our workgroup. we just got the new win7pro machines setup and are using Windows Backup function to create system images to the "server" computer in a shared folder. We've got the images created on 2 computers, and can see the .vhd files and associated folder structure. When testing to see if we could restore from these images, we got the error "Cannot locate backup sets on machine, etc."I moved the backup folder to the root of the drive, and made sure it was WindowsImageBackup or whatever the default is, but still could not find it.
