Backstory: My computer decides to crash on me while browsing some site, and it failed to startup after that. After many tries of getting it to work through system restore/system repair, it still would not load up. I then see an advanced option of restoring to the system default, with an option of saving all personal data such as files and documents. After this successful reinstall, I have a huge folder (190 gigs!) worth of my old files sitting in a folder named 'Backup' in the C: drive, all on a fresh version of Windows 7 (ie: default programs and icons like internet explorer). I have tried running Windows' Backup and Restore application, but the aforementioned backup drive does not show up. Is it possible to transfer everything back?
tl;dr: restored old comp to system default, (with an option to save personal files/programs, all in a new folder C:/Backup) but can't figure out how to move/replace this system default back to my old setup.
The hard drive failed on my friend's Win 7 laptop. I replaced the hard drive, now I am in the process of recovering documents that he had backed up on an external hard drive. He was using Windows Backup.When I start the application in restore mode and direct it to the external hard drive, it shows a backup done on Jan 2. But when I browse through the backup folders using Windows Backup, it does not show any of his recent files. I went ahead and restored the folders, but the most recent files in the restored user folders are only from mid November
I'm trying to restore files from a Vista backup into 7, but, once they're restored I can't find them.
It only affects files that were in the various 'my documents', 'my downloads' etc folders on my Vista install - files from other partitions etc restore fine.
It seems as if the files are definitely being restored somewhere, because if I restore them again I get 'would you like to overwrite these files' dialogs. I've tried searching for the filenames after they're restored but they don't appear. I think maybe it's possible that 7 is restoring them under a different user (although my user name on 7 is the same as it was on Vista).
I'm trying to restore files from a Vista backup into 7, but, once they're restored I can't find them.
It only affects files that were in the various 'my documents', 'my downloads' etc folders on my Vista install - files from other partitions etc restore fine.
It seems as if the files are definitely being restored somewhere, because if I restore them again I get 'would you like to overwrite these files' dialogs. I've tried searching for the filenames after they're restored but they don't appear. I think maybe it's possible that 7 is restoring them under a different user (although my user name on 7 is the same as it was on Vista).
I backed up all of my data files over to a CD/ROM before restoring my Windows 7 PC due to a hard drive failure.
After successfully restoring the Windows 7 PC, I also restored my backed up files from the CD/ROM using HP RecoveryMgr, which was included as part of the backup process. Then I see all folders show "This folder is empty", even though the folder "Properties" show that the folder is not empty and contains files being backed up during the restore.
How can I make the files in the restored folders visible/accessible again?
I just backup files to an external HD and a second internal HD time to time. Then I get new pictures and designs and need to make up backups of those. Is there a good system that backs up only the new stuff? Many are corel files and some folders are pretty big to backing stuff up yet again takes a lot of time and space.
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my screen. I scaned my hdd for errors using my Bios/Advanced options and no errors came up. I decided to take out the hdd and put it into my External Hdd bay to hook up to my laptop to extract the data off it.When i hooked it up to my laptop it showed up empty. I went into folder options and clicked on show hidden files and folders. Everything came up but it was grey/transparent. I then copied the files to another hdd for backup.
Then i formatted the hdd and put on a fresh new OS. Id like to mention i have a second internal drive that i use for backups but it wasnt backed up recently when this issue happen so i had to take out the main drive and use it as an external to back up onto another external drive.so then when i click on my second internal drive after the reinstall of the new OS it shows empty i have to go in and show hidden files and folders.. now they show again transparent. also i plug in my external to get the recent back up and all those files are still transparent when i move them to my desktop that is freshly OS installed they are still grey/transparent and i have to keep the show hidden files and folders to view them.. so its all my music, pics, documents etc they are all greyed out..i tried to copy my backup IE favs into my new IE browser and they wont show up because they are hiden it shows it copied to the favs folder but in ie i cannot view them if that makes any sense.
how I can restore a backup I made in Linux? Before I installed mac os x on my pc, I made a backup of everything on my hard drive via Linux but I had one error of copying a file. When I successfully installed mac os x, I installed Windows 7 on my other partition also successful. But then I deleted everything on that partition and just pasted my backup there => now windows won't boot. Has anybody got a solution so I won't lose all my settings and programs?
Sandy did damage my computer, either the MB or the CPU (Intel i5-760) is fried. At this point, it is not known, if my drives bit the dust as well. There are backups on the external drive, both Windows and Macrium images.The system being built has different MB and Intel i5-3350P CPU. This is an "unplanned" system hardware update and no preparation had been made for the Windows 7 drive for the migration.
My laptop was stolen recently. However, I was lucky to have a back up (old, really old) that I can use to recover at least some of my data.I now have a new laptop and I restored the backup on it. However, I created a user name different from the two that are on the backup. If I now create the two users, will they automatically be linked to the files that were restored? Alternatively, is there a way to link all files to the new username?
I recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
I had my Vista computer's hard drive crash! Fortunately I have a full back up of my data. Purchases new computer with Windows 7 64 bit O/S. A couple of data transfer issues:
-How do I transfer my favourites from backup to the Explorer 9 favourites? -How do I transfer my old e-mail messages to a new e-mail programme.
i recently accidentally deleted a game (world of warcraft) instead of a toolbar through uninstall a program, i was going to try to system restore it, but the last system to restore is no where close to the day/time i removed the file. Is there any other way to retrieve the game folder ?
I have just gotten my computer back after a hard disk replacement. I've gone thru and reinstalled various programs and I've restored my user folder from my backup.I've done all this under an Administrator login.My question is what is the best way to recreate my user login and move/share all my restored data with this default folder? Is it as simple as just creating the user and then moving the individual folders from my restored folder (i.e., AppData, documents, favorites, etc.)Should I not move it but share it? Or should I simply move the documents, pictures and music and recreate everything that would normally be in AppData since this is a clean install?
Is it possible to extract a file, folder from a backup running Win 7? My friends computer crashed he I tried to use the backup image without any luck, so I reformatted losing personal info pics, music and docs. I'd like to restore mentioned files if possible.
Any simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
Ive done a clean install, and i previously backed up my Vaio. When i try to restore programs however, it wont let me do it. It says "your files have been restored" but also says " some program or system files were skipped because they cannot be restored to original location. To restore these files, try restoring the files again and select a different location." Which location do i chose so that the programs appear in my "all programs" tab?
I recently lost some files, so I did a system restore to a date that the files were intact to retrieve them. However, while the programs on the computer are now correctly set back to the system restore date, the files in question are still missing (at least partially). I'm curious is there exists a way to restore not the applications and system settings, but simply to restore old files, or if it's too late at this point. I suspect if I went to a professional they would be able to work some magic to restore the actual files, but it wouldn't be a standard procedure, and I don't have the funds right now to do so.
In more detail: I had XAMPP installed so I could do local testing before putting websites I was working on online. As such, the folder in which I kept all my local data for web development work was within XAMPP's 'htdocs' folder, which is where the local files needed to be stored so that apache and php could utilize them. However, since the install of XAMPP, i'd been having issues getting Apache to run - it worked occasionally, but would usually quit after a second of running each time I started it (that's a whole other issue though). In any case, because I couldn't figure out why Apache wasn't working in my XAMPP install, I decided, 'screw it, I'll give WampServer a try instead, and proceeded to uninstall XAMPP then restart the computer to get a clean slate before installing WAMP. Of course, I foolishly spaced the fact that all my local web development files were stored in the XAMPP files, and they were all deleted during the uninstall. So I proceeded to do a system restore to about 24 hours ago (the most recent system restore point). It seemed fine at first, until I tried to get my old web dev files back: I went to the htdocs folder in my now-restored XAMPP folder, but the old files were not intact! It seems that while XAMPP is back on my computer, all the files that were deleted during the initial uninstall were not restored. Specifically, and I can't for the life of me figure out why this would be, but the only parts that remained were the file structure (all the old folders where there, but not many of the files within them), Javascript files, and favicon image files. Everything else is still missing.
is there a way, within windows, to actually restore all those old files? Or due to the sequence in which the uninstall of XAMPP then the restore went, is it too late?
I have created a backup of files and folders and of system in Windows 7 using the built-in backup program. How can I restore only a few selected files without restoring all. I note they are zip files so i can't identify which files i want to restore.
While her son was using the computer, he deleted various productivity programs (Word, etc.), because he's using it only for gaming.My cousin was trying to get those programs back, and oops!, put in the wrong DVD...the Alienware Windows 7 Home Premium 64-bit reinstall disc.For whatever reason, she allowed the reinstall to go through, and now she has a new, blank desktop, and it's apparently missing video drivers (VGA display), networking drivers (no wireless networking) and who knows what else.Her old stuff is still on the computer in the Windows.old folder.I imagine her son's original setup is gone, but she'd at very least like to get back to regular video display (no drivers), working WiFi, and whatever programs she had before her son zapped them. (There is an Alienware "Resource Disc", would the factory programs be there?)She'd also like her stuff in Windows.old back in a place she can use.
We saw articles about restoring Windows.old, but the DVD drive isn't autobooting. We manually booted the DVD and started the process, but the "Repair" option is missing. We're worried another reinstall A) will take us back to where we were and B) if it'd wipe out Windows.old.
I have my extremely precious photos and videos in one folder of a secondary HD.
When I make changes to the folder on my 2nd HD I would like it to automatically sync up a copy of the folder on my 3rd HD. Can anyone recommend a solution?
I would like to avoid me having to manually make a copy of the folder and copy it to my 3rd HD or always have to make changes to both folders.
My computer(Win 7 home premium) crashed with "bootmgr is missing" error So I take out the harddrive and put it into a SATA-USB enclosure and connect to second computer Now I can see all the directory except "windows" folder, what can I do to get the files out?
I have a folder in the computer, in the folder there are many subfoldrers and many files in the subfolders. i wanted to the see details of the content of the folder and suddenly I see all the files in the folder, I don't see the subfolders any more, I see all the files of the subfolders also, its 15000 files that are not organized any more in subfolders, i can't find the way to bring it back to how it was, that i see the subfolders?
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
I have a notebook running Windows 7 Professional, and it's set to back up via network to an external drive which is connected to a desktop running Home Premium.
On the notebook, when I'm selecting the backup target, it lets me choose a specific folder on the external drive. However, when I'm backing up the desktop directly to the external drive, the only choice is the root of the external drive.
I'd like to specify a folder into which the desktop can back up instead. Can this be done, or am I going to have to pop for another Professional anytime upgrade?
I have my tower pc on constant all day- to record a streaming IP Camera from my work.Initially, I saved these files into my docutments- which they would save as .avi files, and after every several days I would delete them as they would take up ALOT of space on my pc.My pc is 250GB in size, and usually it would be about 80GB full before I had the IP Camera. Just recently, I noticed all of the IP Camera avi files seemed to have disappeared from my documents if I went directly to the folder... I could still see them in documents when I was choosing a location to save the recordings.Upon right-clicking the avi files in the latter, the files would be of no size and wouldn't play.Now my computer is 210GB full in the matter of a week.
