During multiple file coping(file transferring) from one folders to other folders while minimizing all the folder at the time, check the status in taskbar, it showing all folder as file coping folder. is it expected in aero themas or its issue.
I have my extremely precious photos and videos in one folder of a secondary HD.
When I make changes to the folder on my 2nd HD I would like it to automatically sync up a copy of the folder on my 3rd HD. Can anyone recommend a solution?
I would like to avoid me having to manually make a copy of the folder and copy it to my 3rd HD or always have to make changes to both folders.
I just backup files to an external HD and a second internal HD time to time. Then I get new pictures and designs and need to make up backups of those. Is there a good system that backs up only the new stuff? Many are corel files and some folders are pretty big to backing stuff up yet again takes a lot of time and space.
My computer(Win 7 home premium) crashed with "bootmgr is missing" error So I take out the harddrive and put it into a SATA-USB enclosure and connect to second computer Now I can see all the directory except "windows" folder, what can I do to get the files out?
Backstory: My computer decides to crash on me while browsing some site, and it failed to startup after that. After many tries of getting it to work through system restore/system repair, it still would not load up. I then see an advanced option of restoring to the system default, with an option of saving all personal data such as files and documents. After this successful reinstall, I have a huge folder (190 gigs!) worth of my old files sitting in a folder named 'Backup' in the C: drive, all on a fresh version of Windows 7 (ie: default programs and icons like internet explorer). I have tried running Windows' Backup and Restore application, but the aforementioned backup drive does not show up. Is it possible to transfer everything back?
tl;dr: restored old comp to system default, (with an option to save personal files/programs, all in a new folder C:/Backup) but can't figure out how to move/replace this system default back to my old setup.
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
I have a notebook running Windows 7 Professional, and it's set to back up via network to an external drive which is connected to a desktop running Home Premium.
On the notebook, when I'm selecting the backup target, it lets me choose a specific folder on the external drive. However, when I'm backing up the desktop directly to the external drive, the only choice is the root of the external drive.
I'd like to specify a folder into which the desktop can back up instead. Can this be done, or am I going to have to pop for another Professional anytime upgrade?
Dell Studio 1747 with I7, 4 core processor, 8GB ram, Win 7 Pro. When I try to back up my user folder, I get the msg-You must have administrator rights to change this folder (CardSpace). I can't find this folder, even by search. I have gone into the properties of my user folder (William) and made sure I have all rights, and changed the ownership (security tab, owner tab). All I want to do is be able to backup my data.
I have a folder that I'd like to periodically mirror to an external hard disk. How can I easily copy the source to the target, deleting files now deleted in the source, updating files that have been changed in the source, and adding new files to the destination. Would an XCOPY with the appropriate set of switches do the trick - maybe something like
I have a question about System Image Backups. (Win 7 Ultimate, 64-bit).
I have setup System Image Backups to my external 1TB eSATA drive.
I have chosen to allow Windows to manage the space used for backup history, Windows says it will use up to 279GB (which is fine).
The properties on the actual "Windows Image Backup" folder on the external drive shows the size as 32.6GB. However The Windows backup menu "Manage Windows Backup disk space" shows "System Image: 68.90 GB."
Primary Question:
Is Windows Backup storing my system images somewhere else in addition to this folder, or is the menu just plain wrong?
Additional Question: Is the Windows Backup utility capable of doing differential backups for the system image, or is each backup a full backup? The GUI menus are not giving me enough information. Based on what I see, it looks like System Image backups are always full, and data files are incremental or differential.
When I backup to an external USB drive, Explorer shows the 2 folders created (WindowsImageBackup and MYNAME-PC) as having 0 bytes, 0 files and 0 folders when right clicking those folders and looking at Properties.
Yet, if I right click the drive icon, Properties shows the drive with 15GB of used space.
Is this normal? I'm not using third party software for the backup.
Last week I've reinstalled my Windows 7 because my notebook was slow and I wanted to went back to the factory setting. I've picked my Seagate external HD (2TB) and moved everything I had into a folder called "[Acer]".
Well, I had some problems with external hard drives this year, I've lost many information from an external HD, and I found out that it was because I've connected this HD in a Macintosh. I really DON'T KNOW WHY, but every folder that I had opened in my Macintosh went CORRUPTED in Windows 7, with no chances to repair the files.
Since then, I haven't plugged my external hard drives into my Macintosh.
I don't know if it's a Windows 7 problem or a problem with my Seagate HD, but the quantity of issues that I had with this external HD since then was crazy. Every time I disconnected this HD and then connected again, Windows asked me to repair and scan the files. And the amount of time to scan everything was, like, one and a half hour... so it was bugging me a lot. But the real problem is: yesterday I've plugged my external HD and my backup folder (called "[Acer]" simply disappeared from the drive. I've tried to run "chkdsk E: /F", with no success.
Now I'm running a "chkdsk E: /R", and it will take me a lot of time, and I'm really not positive to recover my backup folder.
All the old folders are there, everything is fine, but this folder disappeared, only this folder (and everything that were inside of it) disappeared.
I've also tried Recuva (Recuva - Download) to recover my folder, but it haven't found it.
W7 x64 ult OS. Something went wrong.My system will no longer boot - the error message lists registry corrupt. I am 99% sure it is not a virus.I have another drive with a W7 system on it in the same box and I can boot from that.It is just a basic clean install test system, but I can access all the drives.Is there a backup registry file I can use to replace the corrupt one........and which files are the registry?Is there anything else to do to recover othere than a clean install?I can't do a repair install because it has to boot to the system first.Unless. Can I do a repair install on the bad drive from a boot to the good drive?
i have an xp backup bkf i need to get some files from but im on a win 7 home premium latop (x64) and when i downloaded the restore utility from MS it wont allow to install it due to no "turn on removable storage" option in the programs . i need help because MS leads me in circles and these files are really important!
getting a .bat file to run when a file is added to a folder.. E.G When a file is downloaded to the downloads folder the .bat file runs and is moved to a separate location.
Just wondering if it's possible to make Windows backup do it in another place besides the root of another drive.It's really annoying seeing those files all the time,so I move them to a folder anyways.. which ocfourse windows fails to see then, but since I dont have a schedueled backup it's ok for now... Just need the one master backup for now, and if i add something or change something I move the files back to root to do that.
I have big file (133Gb) backup file on my hard drive and I wanted to move this to external hard drive (Seagate FreeAgent GoFlex Drive). When I tried it to move or copy to the external I've got message: Error 0x8007045D: The request could not be performed because of an I/O device error. I was looking online for some help and I found some advice that I have to make chkdsk in cmd mode but when I tried I've got message: "Chkdsk" is not recognized as a internal or external command, operable program or batch file. I don't know how to solve this problem. Can someone help me? My OS is win 7 Enterprise x86.
I am trying to determine what the use of the backup section of the Back up and Restore screen is for. Is it just for doing file backup or is it intended to be used also for Full System Image backups also?
I make use of the Windows 7 Backup and Restore programs.
Automatically everyday a backup is scheduled. This backup is configured to contain all user files and a system image.
Now I have tried to find the system image, but I don't know what file extension the image backup should have.
In my backup folder, below, only two .VHD files are present, and a bunch of XML Documents. X:\WindowsImageBackup\XXXX\Backup 2009-11-04 160010
Can someone explain me in which files the backup and restore programs save the backups? Also I like to know where I should look for, to know for sure my backup is done successfully.
Can I use easy file transfer from a hard drive back up image of XP? I can mount the image on my win 7 computer. Can easy file transfer pull the user profiles, data, pics, music,doc, etc from a mounted image in the same computer?The image is no longer restorable to any computer.
One of my drives in raid0 crashed and fortunately I had windows 7 x64 backup activated and running daily. After recreating the array with the remaining drives, I tried to restore from the external usb drive but it didn't work. Apparently the problem is that I had been running "file backup" and not "image backup". Probably because when I configured backup for the first time, it asked to back up all my drives which was not possible and not needed so didn't check the image backup button.
Now the backup set is visible only from within windows (I set Windows 7 again up) but NOT from the restore part of Windows 7 setup / recovery disk. Files inside the backup set are not .vhd but zipfiles. All my c: drive files actually ARE inside the backup set, but running restore will restore all the crap folders (like c: vidia) except from the system folders like c:windows, c:program files (and x86), c:programdata etc.
Any way to restore these? I am thinking of the possibility of somehow restoring all the files and running windows repair on top of this to actually make c:drive bootable again. My users folder is not affected as I had moved it to d: but this presents the additional challenge of being able to actually make the system see the users folder....
So I am trying to create a batch file that will copy certain folders from the My Documents and Program Files 86 folders. Of course these are protected. I can make a batch file and use robocopy to copy other files just fine. How can I set admin privileges? Or whatever it is I need to do to make it work? I am using group policy editor to run the bat file on shutdown.
Example:
Robocopy C:Folder D:Folder
that works fine...but when I try copying files out of Program Files x86 or My Documents the batch fails
I have a Win 7 64-bit and yesterday, I got the black screen of death on boot. Black screen, blinking cursor right after I boot. I can access the Samsung recovery menu. I figured I'd just backup my data and do system restore or clean reinstall. After hours of backup, I looked to see the details on a popup dialogue and apparently, nothing was backed up because it was unable to access the files on my C: drive and transfer onto an external hard drive. I also tried to backup an image, but that also fails.
I have just created a batch file to backup a few things on my machine, the thing is the batch file has a menu in it and i was wondering if i was to set the batch file to run under task scheduler say once a week is there a way i can get it to excute through the menu of the batch file? if not when the task scheduler runs it, it will just stay a point waiting for me to press enter.
Is there a way I can create a batch file so de-fragment my hard drive, once that has finished, backup to an external hard drive, and then one that has finished shut down the PC?
I backup my files using windows backup to an external hard disk. But the backup size is smaller than the selected files. The files that are selected to be backed up are 30-40 GB, and the size of the backup shows it is only 3.7 GB. Why is this. It says its 3.7 both in the control panel for windows backup, and when looking at properties on the backup folder.
