My computer(Win 7 home premium) crashed with "bootmgr is missing" error So I take out the harddrive and put it into a SATA-USB enclosure and connect to second computer
Now I can see all the directory except "windows" folder, what can I do to get the files out?
I have my extremely precious photos and videos in one folder of a secondary HD.
When I make changes to the folder on my 2nd HD I would like it to automatically sync up a copy of the folder on my 3rd HD. Can anyone recommend a solution?
I would like to avoid me having to manually make a copy of the folder and copy it to my 3rd HD or always have to make changes to both folders.
I just backup files to an external HD and a second internal HD time to time. Then I get new pictures and designs and need to make up backups of those. Is there a good system that backs up only the new stuff? Many are corel files and some folders are pretty big to backing stuff up yet again takes a lot of time and space.
Backstory: My computer decides to crash on me while browsing some site, and it failed to startup after that. After many tries of getting it to work through system restore/system repair, it still would not load up. I then see an advanced option of restoring to the system default, with an option of saving all personal data such as files and documents. After this successful reinstall, I have a huge folder (190 gigs!) worth of my old files sitting in a folder named 'Backup' in the C: drive, all on a fresh version of Windows 7 (ie: default programs and icons like internet explorer). I have tried running Windows' Backup and Restore application, but the aforementioned backup drive does not show up. Is it possible to transfer everything back?
tl;dr: restored old comp to system default, (with an option to save personal files/programs, all in a new folder C:/Backup) but can't figure out how to move/replace this system default back to my old setup.
I don't know if this has been asked already and sorry if it has.
Is there a way to save both Vista and Windows 7 complete system image on the same partition? If possible rename the folders at least (I tried this but didn't work)?
I have a limited space in my hard drive and allocated only one partition for system backups. I'm quite happy with Windows 7 and I would like to have both Vista and Windows 7 backups just in case. I'm also trying to avoid multiple DVDs as backup media as much as possible so that restoring the image would be easier for my kid when i'm not around.
I have a notebook running Windows 7 Professional, and it's set to back up via network to an external drive which is connected to a desktop running Home Premium.
On the notebook, when I'm selecting the backup target, it lets me choose a specific folder on the external drive. However, when I'm backing up the desktop directly to the external drive, the only choice is the root of the external drive.
I'd like to specify a folder into which the desktop can back up instead. Can this be done, or am I going to have to pop for another Professional anytime upgrade?
Dell Studio 1747 with I7, 4 core processor, 8GB ram, Win 7 Pro. When I try to back up my user folder, I get the msg-You must have administrator rights to change this folder (CardSpace). I can't find this folder, even by search. I have gone into the properties of my user folder (William) and made sure I have all rights, and changed the ownership (security tab, owner tab). All I want to do is be able to backup my data.
I have a folder that I'd like to periodically mirror to an external hard disk. How can I easily copy the source to the target, deleting files now deleted in the source, updating files that have been changed in the source, and adding new files to the destination. Would an XCOPY with the appropriate set of switches do the trick - maybe something like
I have a question about System Image Backups. (Win 7 Ultimate, 64-bit).
I have setup System Image Backups to my external 1TB eSATA drive.
I have chosen to allow Windows to manage the space used for backup history, Windows says it will use up to 279GB (which is fine).
The properties on the actual "Windows Image Backup" folder on the external drive shows the size as 32.6GB. However The Windows backup menu "Manage Windows Backup disk space" shows "System Image: 68.90 GB."
Primary Question:
Is Windows Backup storing my system images somewhere else in addition to this folder, or is the menu just plain wrong?
Additional Question: Is the Windows Backup utility capable of doing differential backups for the system image, or is each backup a full backup? The GUI menus are not giving me enough information. Based on what I see, it looks like System Image backups are always full, and data files are incremental or differential.
When I backup to an external USB drive, Explorer shows the 2 folders created (WindowsImageBackup and MYNAME-PC) as having 0 bytes, 0 files and 0 folders when right clicking those folders and looking at Properties.
Yet, if I right click the drive icon, Properties shows the drive with 15GB of used space.
Is this normal? I'm not using third party software for the backup.
Last week I've reinstalled my Windows 7 because my notebook was slow and I wanted to went back to the factory setting. I've picked my Seagate external HD (2TB) and moved everything I had into a folder called "[Acer]".
Well, I had some problems with external hard drives this year, I've lost many information from an external HD, and I found out that it was because I've connected this HD in a Macintosh. I really DON'T KNOW WHY, but every folder that I had opened in my Macintosh went CORRUPTED in Windows 7, with no chances to repair the files.
Since then, I haven't plugged my external hard drives into my Macintosh.
I don't know if it's a Windows 7 problem or a problem with my Seagate HD, but the quantity of issues that I had with this external HD since then was crazy. Every time I disconnected this HD and then connected again, Windows asked me to repair and scan the files. And the amount of time to scan everything was, like, one and a half hour... so it was bugging me a lot. But the real problem is: yesterday I've plugged my external HD and my backup folder (called "[Acer]" simply disappeared from the drive. I've tried to run "chkdsk E: /F", with no success.
Now I'm running a "chkdsk E: /R", and it will take me a lot of time, and I'm really not positive to recover my backup folder.
All the old folders are there, everything is fine, but this folder disappeared, only this folder (and everything that were inside of it) disappeared.
I've also tried Recuva (Recuva - Download) to recover my folder, but it haven't found it.
I have a Dell Inspiron 545s Desktop - Intel Duo Core 2.93, 6gb RAM, 720gb HD, 64bit Windows 7
I get the message: (every time I try and open a folder on my c/drive - Can't access Windows Explorer folder on the taskbar and any other folder or file by double clicking it. I can open them by right clicking, then open) "this file does not have a program associated with it for performing this action. Please install a progra or, if one is already installed, create an assocation in the Default Programs control Panel".
I can open applications. But, I can not open the folder for them lets say in c:/program files -- the only way to open them is by rightclicking, then open. If I double click, I get the above error message. (same issue with "my documents", "My pictures", etc).
Included with the above problems: I now, can not access User Accounts. When I go into Control Panel, click User Accounts.. I can not manage existing ones, nor can I "Add or remove user accounts". I click the link and nothing happens.
I have someething built into the computer called "Dell DataSafe Backup". Its a recovery partition/part of the HDD that saves all my files for a recovery. However, I can NOT access it. I click the "Dell DataSafe" in my taskbar and nothing happens..
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
I backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
Currently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
Any simple backup program that is capable of backing up large files incrementally by splitting the file and backing up only changed parts of the file? The files I'm talking about are files that get altered by appending stuff at the end of the file, e.g. log files or mailbox files, so it's generally possible to split a new version of the file at the exact point where the old version stopped, purely by file size.
Specifically, I want to back up Thunderbird and SeaMonkey mailboxes without having to create additional subfolders within those programs. I understand that if something had changed near the beginning of the file, then the whole file will have to be backed up, unless the backup program is capable of some very clever searching, but mostly the files will change only by having data appended to it.
I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my screen. I scaned my hdd for errors using my Bios/Advanced options and no errors came up. I decided to take out the hdd and put it into my External Hdd bay to hook up to my laptop to extract the data off it.When i hooked it up to my laptop it showed up empty. I went into folder options and clicked on show hidden files and folders. Everything came up but it was grey/transparent. I then copied the files to another hdd for backup.
Then i formatted the hdd and put on a fresh new OS. Id like to mention i have a second internal drive that i use for backups but it wasnt backed up recently when this issue happen so i had to take out the main drive and use it as an external to back up onto another external drive.so then when i click on my second internal drive after the reinstall of the new OS it shows empty i have to go in and show hidden files and folders.. now they show again transparent. also i plug in my external to get the recent back up and all those files are still transparent when i move them to my desktop that is freshly OS installed they are still grey/transparent and i have to keep the show hidden files and folders to view them.. so its all my music, pics, documents etc they are all greyed out..i tried to copy my backup IE favs into my new IE browser and they wont show up because they are hiden it shows it copied to the favs folder but in ie i cannot view them if that makes any sense.
Which backup software to backup Pictures/Documents/Videos so that when you do a fresh install you don't loose anything.apart from your programs of course, just the documents backed up what do you use?
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
Is there way I can change the location of the backup files location using the Win7 Backup Manager? Right now it just shows me the location for a USB port. I would like to use a Home Group Location.
I have a Win7 64-bit system and have been successfully using Windows backup on an approximately monthly basis. I ran it before going to bed last night and woke up to a "The backup failed." when I tried to create a system image of both of my hard discs. The error is "Incorrect function. (0x80070001)". I found a workaround solution at Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and looked up and found a number of "junction points", most rooted at c:UsersDilipAppData - but the problem is that there is no such folder.