When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI want to backup my PC's data files to an external HD using Windows 7 backup & restore utility. If I use the recommended default option that also includes a back mirror of Windows 7 will the PC automatically backup only New data since the backup at the scheduled option chosen? Will the backed up files on the backup drive appear as windows file folders (My Pictures, My Documents etc.) or be in an encoded file format?
View 1 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies View RelatedThe Windows 7 Backup Utility is vastly improved compared to both the Windows Vista and Windows XP backup utilities. The tutorials below will show you how to use this great new version of the Windows Backup Utility.
View 0 Replies View RelatedI had Acronis 2011 on my system but removed it. Since then it seems I am unable to use the windows backup utility in any way.. I click on it and nothing..I can do restore etc.My VSS is automatic and started?
View 5 Replies View RelatedI keep getting an error every time I run Windows Backup Utility: "Backup skipped backing up F:Recorded TV as it is on the backup target." What does this mean, and how can I get to stop skipping files?
View 5 Replies View RelatedI'm trying to be a good Windows 7 citizen and give the built in backup chance instead of installing Acronis or Macrium or the sort.
I'm running this on my Dell D830 laptop with a 500gb internal drive in it which only has about 130gb used. I'm trying to run the back to a 250gb internal drive in the drive bay.
It fails every time with the error that there is not enough disk space to back up.
I also tried backing this up to an external 750GB drive but I received the same error.
Any ideas?
After my last near disaster I need to get off my butt and backup this pc. I was using Acronis but the earlier version of it was a lot easier. I don't know if I need to backup sector by sector and that's what I didn't understand.Is there something that will work the same and would work on boot up, either starting with a separate disk or with the boot up option on the backup disk?
View 7 Replies View RelatedI have an old HD that I used to use for backups in a different PC setup, and though I deleted those backups when I moved on to a different HD, the backups were recoverable using Pandora and I believe intact since I never used the drive in question after that time. So specifically, I now have a folder called "Backup Set 2011-02-13 190024" that contains a 84 zipped folders worth 13.1GB that comprise that backup, and I want to restore them in some automatic fashion to see what's actually worth salvaging. (I assume this doesn't have to be done one-folder-at-a-time, drilling down through five layers of branches in the folder-tree, and almost immediately forgetting where I am...) But when I look at "Backup and Restore," I can't bring up this or any target folders - the link "Select another backup to restore files from" produces a blank set of choices, and there doesn't appear to be any way to 'load' a particular folder to restore, as I would have expected.
View 4 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI had windows 7 home premium free upgraded from Vista home premium.
1. The setup stored in D partition is whether win 7 or Vista. how can i confirm?
2. Recently i was creating system image but due to unavailable more blank dvd i could not completed and i had to interrupt after a single dvd disk. and again next day when i am trying to make system image, i could not getting any option at Backup and Restore folder in control panel. Pls advice.
My system info:
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P7550 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4063 Mb
Graphics Card: NVIDIA GeForce GT 130M, 1024 Mb
Hard Drives: C: Total - 466843 MB, Free - 317496 MB; D: Total - 10091 MB, Free - 1408 MB;
Motherboard: Quanta, 361B
Antivirus: Microsoft Security Essentials, Updated and Enabled
I'm not exactly sure how the Backup and Restore feature in Windows 7 work. Does it backup only your operating system and important processes and certain programs, or does it also backup the data on your harddrive such as music, movies etc? Is this feature essentially the same as creating a recovery partition/disk ?
View 2 Replies View RelatedBefore buying a new Windows 7 computer I was using XP. Using the installed Retrospect 6.5 program I backedup all my files to an external hard drive.I can access the hard drive and I can see the backup file but cannot open it to restore my documents and settings.("no program associated with this file extension")The software that came with the Accomdata hard drive will not load in Windows 7.I searched the web for .rbc file" openers" but these all seem to be "commercial" programs (ie, cost money).
View 2 Replies View RelatedUsing the Windows 7 Backup and Restore feature I made a back up of my Documents folder and my Desktop (the only two things on my computer I care about). I did not check off the option "Include a system image of Drives: ---". After the backup completed I clicked on the JOSH-PC (backup file) the window saying "Choose an option below for the selected backup" came up. If I click "Restore my files from this backup" will it automatically overwrite my current Desktop and Documents folder with what is in the back up or will I have a choice as to where on my computer these files are restored to?
View 3 Replies View RelatedWindows 7 SP1 NTFS..I'm trying to create an image as I did with Norton's Ghost in XP and later when I used Norton's Save & Restore in Vista where the entire contents on my C: drive was backed up.In Windows7 Backup & Restore it's a little ambiguous where it saves in steps. I've viewed all options which are: I selected " Create an Image" on the left side of the first dialog box. This gives me these selections which are pre-selected and can not be changed: I don't want to do incremental backups where data is added automatically later. All I want is a one time only backup which creates an image of my entire C: with... Program Files, Registry, System Files, Boot sector, Partition table, etc..
View 5 Replies View RelatedI cannot seem to start the Backup program provided with Windows 7.I go to Control Panel and click on "Backup up your Computer" and nothing happens. What do I have to do to start the Windows 7 Backup program?
View 9 Replies View RelatedHas anyone tried to burn a System Image (with Windows Backup and Restore) onto a BD-R disk?I have 52.5 GB used on my C drive (Windows 7 x64). I have a clean install, with windows updates, and it would be phenomenal if I could use my WH12LS30 (LG) internal blu-ray burner for the System Image creation, since I only have 1 harddrive.When I try a BD-R (and this is my 1st try at System Image burn) , I see "The media needs to be formatted before it can be used...". Just didn't sound right to procede.
View 2 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
Is it possible to successfully backup and restore Windows 7 pro with the XP virtual disc installed with Acronis or similar programs? If so, are any special precautions required?
View 1 Replies View RelatedI cannot open the Win 7 Backup & Restore program, though it has worked OK in the past.I recently installed Spotmau Data Backup Kit and, thinking this might have affected the Windows program, I uninstalled it.
View 2 Replies View RelatedI am running Windows 7 [64 bit]. I have been using Windows backup, but it has stopped working and I am unable to open the programme from the Control Panel.
View 1 Replies View RelatedMy work laptop was being changed from a Dell to a Lenovo and I was using Windows Backup & Restore to backup my important documents and emails. I took a final backup to my external hard drive before handing my old laptop to IT. Once I restored all my files I noticed the following:
1. Some files were not the latest versions, i.e. they were a month old.
2. Some subfolders simply weren't there. I had two subfolder in one of my folders and only one was restored and not the other. I made sure that I restored from the latest backup file.
When I upgraded to Win 8 from Win 7 I imaged to my 2T usb drive with both of these programs.Is having two dissimilar programs going to cause any troubles?I always depended on Acronis but it seemed to be hard to install this time. They both check out ok with the discs.If 2 backups were a dependable move and did not cause a conflict, I would keep it as is.Should I keep the two or just one?
View 3 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI am trying to do my weekly back-up with the windows 7 system backup and restore, as I always use, and for some reason it is not longer responding, nor can I open the program to make any changes to the process.
View 7 Replies View RelatedHad a HDD failure - just replaced it and a clean install of W7 32 bit. I had been carrying out regular backups using Backup wizard and a have a recent backup set. How do I restore form that. Alternatively I have a separate backup of my documents etc. As a straight save. Would I be better to just drag them back onto new build and not bother with restore.
View 3 Replies View RelatedI was contemplating using a Raid 0 array as my primary C: drive with OS. I understand all the issues with that and do regular daily backups. I used to use Acronis which had no trouble with a raid array. But on this new build I was wondering if the built in backup tools would be able to image and more importantly restore my data to the array. My back up drive is not part of the array. I would guess that it would see it just fine from the OS and have no trouble creating the backup image, I am more concerned that if I had to use the rescue disk and reload the image whether or not the array would be visible to the restore disk.
View 8 Replies View RelatedI was wondering if this would work as a poor man's backup system for Windows 7.
1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).
2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.
Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??
I have an Acer Aspire AS5251 laptop. I was in "Backup & Restore", running Backup. I went to bed after inserting the sixth backup disk. I woke up this morning and I had to login. So, after that, I noticed a popup window with a message saying that my windows update had occured overnight and my computer had restarted.There was also a Windows Backup Error Window indicating that my backup did not complete successfully.Question is, how do I get the backup to continue and not have to start from scratch
View 6 Replies View Related
