Unable To Use The Windows Backup Utility?
Jan 26, 2012
I had Acronis 2011 on my system but removed it. Since then it seems I am unable to use the windows backup utility in any way.. I click on it and nothing..I can do restore etc.My VSS is automatic and started?
View 5 Replies
ADVERTISEMENT
Aug 23, 2012
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
Apr 1, 2010
The Windows 7 Backup Utility is vastly improved compared to both the Windows Vista and Windows XP backup utilities. The tutorials below will show you how to use this great new version of the Windows Backup Utility.
View 0 Replies
View Related
Feb 16, 2012
I keep getting an error every time I run Windows Backup Utility: "Backup skipped backing up F:Recorded TV as it is on the backup target." What does this mean, and how can I get to stop skipping files?
View 5 Replies
View Related
Aug 18, 2009
I'm trying to be a good Windows 7 citizen and give the built in backup chance instead of installing Acronis or Macrium or the sort.
I'm running this on my Dell D830 laptop with a 500gb internal drive in it which only has about 130gb used. I'm trying to run the back to a 250gb internal drive in the drive bay.
It fails every time with the error that there is not enough disk space to back up.
I also tried backing this up to an external 750GB drive but I received the same error.
Any ideas?
View 1 Replies
View Related
Jan 4, 2013
I want to backup my PC's data files to an external HD using Windows 7 backup & restore utility. If I use the recommended default option that also includes a back mirror of Windows 7 will the PC automatically backup only New data since the backup at the scheduled option chosen? Will the backed up files on the backup drive appear as windows file folders (My Pictures, My Documents etc.) or be in an encoded file format?
View 1 Replies
View Related
Sep 24, 2011
After my last near disaster I need to get off my butt and backup this pc. I was using Acronis but the earlier version of it was a lot easier. I don't know if I need to backup sector by sector and that's what I didn't understand.Is there something that will work the same and would work on boot up, either starting with a separate disk or with the boot up option on the backup disk?
View 7 Replies
View Related
Jan 13, 2011
I'm currently reformatting my Toshiba M400-S5032 to install Windows 7. Problem is that due to the PC coming with a RAID utility, the installer is unable to detect the HDD. How to get rid of the RAID?
View 4 Replies
View Related
Nov 11, 2011
Is there anything that I have done wrong here? I am trying to use DVD-R+ Double-sided discs as backup media for Windows 7 Backup/Restore program. It worked once, but now I'm getting message that the disc can't be used for my 2nd backup??? I have a DL disc drive which works fine for everything else but the backup.
View 1 Replies
View Related
Jan 18, 2013
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
View 4 Replies
View Related
Sep 28, 2012
I recently had to reinstall windows 7 on my laptop as it randomly decided not to boot up. I had a backup of my files saved onto a partition on my laptop but it won't let me restore them for some reason.
I can access the partition from the computer tab and I see the backup there. When I click on it it asks me if I want to 'restore files from this backup', but when accept there are no backups listed.
I originally tried to repair my windows 7 when I had to reinstall it but it came up with a message saying that there were no backups to restore!
View 8 Replies
View Related
Jan 26, 2013
on my dell inspiron desktop cannot complete backup. recently had to replace hard drive. set up a 30gb partition for backup but message is that it is insufficient space. backup appears to only require 12gb. what am i doing wrong? running windows 7 64 bit home premium with a 500 gb hard drive.
View 1 Replies
View Related
Nov 23, 2012
I have a Win 7 64-bit and yesterday, I got the black screen of death on boot. Black screen, blinking cursor right after I boot. I can access the Samsung recovery menu. I figured I'd just backup my data and do system restore or clean reinstall. After hours of backup, I looked to see the details on a popup dialogue and apparently, nothing was backed up because it was unable to access the files on my C: drive and transfer onto an external hard drive. I also tried to backup an image, but that also fails.
View 9 Replies
View Related
Mar 7, 2010
When attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
View 9 Replies
View Related
Jan 14, 2012
I had just restored my laptop to a backup that I had created when I just bought it. But now after the Starting Windows screen it says " Setup is starting up services " and it just stops there. I waited for hours and nothing has happened. What should I do?
View 1 Replies
View Related
Jun 10, 2012
I have Win 7 Ultimate. I recently bought a usb turbotenna to catch wifi. It worked fine with the Ralink software. Ralink worked in conjunction with wzc as I set it up that way while installing the software. After a few days, I had what I thought was trouble so I uninstalled the Ralink software. I then plugged in the usb adapter and let windows load it's own drivers. Few days after that, I reinstalled the Ralink software and opted to "Use wzc as configuration utility" instead of using Ralink's. Ever since then, while I can still see and log on to networks using windows, the Ralink utility now shows NO networks. It now shows, "NIC or driver not ready". After several uninstall/reinstall, Windows will not relinquish it's primary control. I want to go back to Ralink showing networks and letting me connect through it's site survey.
Would uninstalling the Broadcom wireless connection be the solution? How do I get it to once again be secondary?
View 1 Replies
View Related
Apr 9, 2012
I am seeing a utility that will let me enter the command that I use in XP and then tell me what the corresponding comand or sequence of comands are in Windows 7. What I am finding is I am spending many hours locating the correct set of sequences to do something which is very straightforward in XP and do the same thing in Windows 7. I end up going onto the web and have to search for the command and the information necessary to accomplish a task. An example of this is creating an ODBC connection. In XP it exists as an option in the Control Panel/Administrative Tools/Data SOurces ODBC. In Windows 7 now its buried in Windows System32/odbcad32. I am not seeing any real advantage of using Windows 7 other than running in 64bit mode. It seems that the order of where things/commands are located and what commands are called is many times changed as well.
View 2 Replies
View Related
Feb 10, 2011
When I ran the Windows Installer Cleanup Utility, 2 items were there I didn't recognize.
1.(All Users) Shasta [7.01.0000.0001]
2. (All Users) SFR [7.01.0000.0003]
bTW I ran the utility to get rid of Macrovision and Cyberlink malware.
View 5 Replies
View Related
Aug 13, 2012
Pavilion dv5 utility drivers windows 7
View 1 Replies
View Related
Dec 18, 2012
Sound drivers for windows 7 utility?
View 2 Replies
View Related
Jun 30, 2011
Does anybody know of a utility program like Windirstat that runs in Windows 7 environment?
View 2 Replies
View Related
Jun 5, 2011
I bought a Toshiba Netbook NB500 with Windows 7 starter a week ago and this weekend when I turned it on it started to run the Startup Repair utility. This kept looping around and wouldn't repair. I tried fixing it using some suggestions on this site and other sites but for some reason (my computer illiteracy) I just couldn't get it to work. I let the startup repair run multiple times for about 6 hours. Finally got fed up and returned the computer to the store.
My main question is now that I have returned it and even though I had a log on password can someone get on the computer to access what I had on it? There is nothing too important just worried about passwords and such. Should I err on the side of caution and change all my passwords or is the computer toast and no one will be able to get on.
View 2 Replies
View Related
Jun 12, 2012
I have a 8GB Sandisk SD that I have used successfully for all sorts of things. Now I'm trying to prep it for an Install device for Windows 7 or 8 or whatever, and for some reason the Windows 7 Utility cannot write to it. I checked the physical lock, reformatted it to Fat 32 and retried, with same result. I'm guessing there is something on there that I cannot see that is trouble. within the tool menu I can access the device, find the .iso, run it, but it fails saying "cannot write to this device".
View 1 Replies
View Related
Aug 22, 2011
Where can i download Graphics: ATI Radeon* Xpress 200 Graphics Utility for windows 7.
View 4 Replies
View Related
Sep 8, 2012
license key for sound driver for windows 7 utility?
View 2 Replies
View Related
Jan 21, 2013
License key for sound driver for windows 7 utility.
View 5 Replies
View Related
Jan 11, 2012
If anyone can guide me to a utility or software that can burn or make a usb or cd multiboot having both xp and Win 7 windows on it
View 2 Replies
View Related
Dec 31, 2012
Hfree download sound driver for windows 7 utility
View 1 Replies
View Related
Jan 6, 2013
i want sound driver for window 7.My mother board is of intel(dual core) ASUS.
View 1 Replies
View Related
Feb 16, 2011
I Upgraded My Windows7 Starter To Ultimate Recently And Everything Was Going Fine, But I Wasn't Happy With The Disk Space Because I Had Ubuntu As Second OS And I Wanted More Space For Win7. ( Ubuntu Was In The same Partition As Win7 C: ). I Searched For Ways Of Increasing The Size Of The Partition But I Didn't Understood Them So I Deleted Ubuntu. The Space Wasn't Recovered (Unallocated Space) So I Still Searched For Ways Of Making The Partition Size Bigger And i Found a Way That Said If You Right Clicked The Gray Square Of Disk Utility And Click a Phrase That i Don't Remember You Can Show the "Resize" Option Of the Partition.i Did That and i Received a Notification Dialog That Said That Said That If i Do That All The Partitions (OS's, Files, And Drivers) Would Be Deleted And I Like A DUMB Clicked "Ok" At Next Restart There Was No Boot Manager, The Boot Just Loaded Again And Again. So I Installed Ubuntu Using a Bootable USB (Current OS) And There Was No "Install Alongside Other OS" Option. I Tried To Run Windows 7 Setup Again Using a Bootable USB, But I Get Stuck at The Part That You Must Select The Drivers Needed So Windows Could Read The Partitions. I Have The CD With The Drivers But i Have a Dell Inspiron Mini 1012 Netbook With No CD Drive So i Downloaded All The Drivers That the Factory Installs From Dell.com And Saved It on A USB But the Windows 7 Setup Doesn't Recognize The Drivers, It Only Recognize The USB But Not It Contents(Drivers).I Want To Keep Using Windows 7 And All Programs i Need Windows But It Seems Like Ubuntu Is My Only Option.
View 9 Replies
View Related