Is there anything that I have done wrong here? I am trying to use DVD-R+ Double-sided discs as backup media for Windows 7 Backup/Restore program. It worked once, but now I'm getting message that the disc can't be used for my 2nd backup??? I have a DL disc drive which works fine for everything else but the backup.
View 1 Replies
I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
View 9 Replies View RelatedI had Acronis 2011 on my system but removed it. Since then it seems I am unable to use the windows backup utility in any way.. I click on it and nothing..I can do restore etc.My VSS is automatic and started?
View 5 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A4-3300 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3575 Mb
Graphics Card: AMD Radeon HD 6410D, 512 Mb
Hard Drives: C: Total - 466936 MB, Free - 259482 MB; D: Total - 305242 MB, Free - 137596 MB;
Motherboard: Foxconn, A75M
Antivirus: Kaspersky Internet Security, Updated and Enabled
I recently did a Clean install of WIN 7 from scratch (after reloading the manufacturers settings), download Microsoft Updates and Kaspersky 2013. However I am unable to restore from my backup Drive (D), Win accepts the command and identifies the File/s to be restored, yet on completion the files do not appear to have been restored after a restart.
I recently had to reinstall windows 7 on my laptop as it randomly decided not to boot up. I had a backup of my files saved onto a partition on my laptop but it won't let me restore them for some reason.
I can access the partition from the computer tab and I see the backup there. When I click on it it asks me if I want to 'restore files from this backup', but when accept there are no backups listed.
I originally tried to repair my windows 7 when I had to reinstall it but it came up with a message saying that there were no backups to restore!
on my dell inspiron desktop cannot complete backup. recently had to replace hard drive. set up a 30gb partition for backup but message is that it is insufficient space. backup appears to only require 12gb. what am i doing wrong? running windows 7 64 bit home premium with a 500 gb hard drive.
View 1 Replies View RelatedI have a Win 7 64-bit and yesterday, I got the black screen of death on boot. Black screen, blinking cursor right after I boot. I can access the Samsung recovery menu. I figured I'd just backup my data and do system restore or clean reinstall. After hours of backup, I looked to see the details on a popup dialogue and apparently, nothing was backed up because it was unable to access the files on my C: drive and transfer onto an external hard drive. I also tried to backup an image, but that also fails.
View 9 Replies View RelatedWhen attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
I had just restored my laptop to a backup that I had created when I just bought it. But now after the Starting Windows screen it says " Setup is starting up services " and it just stops there. I waited for hours and nothing has happened. What should I do?
View 1 Replies View RelatedI have an Asus Essentio desktop and it didnt come with any Win7 discs. Is there anyway to extract Win7 and burn to a disc? I only ask because I want to rebuild my PC and wanted a fresh install without all the other software that came on my PC.
View 9 Replies View RelatedI have been researching the topic and am at a loss after around an hour of fruitless research. I recently upgraded from xp 32 bit to windows 7 32 bit. I want to upgrade to 64 bit so theres more RAM available and cannot find any information on doing it without discs that doesnt use USB or something. Got an external hard drive what the hell do I do? I downloaded the files but then couldn't open of course bc they were 64 bit files or whatnot.
(my cpu is capable of running it)
So it has come to the point where I can FINALLY get an SSD (and I look forward to it very much), however I've come across what could be a little problem.I want to fresh install everything on the SSD (my computer is so long overdue a reformat it's disgraceful), however I can't find/never had the discs for windows 7.When I bought the computer it came with windows vista Home Premium, with an eligibility for free upgrade to W7 home premium. I duly upgraded to windows 7 of course and all has been dandy since (maybe 2 years now, that's how long I've not reformatted for!).But now, I can't find a disc for windows 7 anywhere, I have the Vista Home Premium disc, which has the W7 upgrade slip inside with a serial number on, but no W7 disc is to be found. I'm pretty OCD about keeping my software discs and general 'important stuff' together, so I'm beginning to think it may have been a digital download?Either way, whether I have lost it or never had it, how can I go about reinstalling windows7, preferably without buying it again... I'm guessing downloading an .ISO and creating a bootable disc, provided I can find my cd-key?
View 3 Replies View RelatedI'm helping a friend with her windows 7 emachine (64 bit) and when its all back in working order, I'd like to make her a set of recovery discs but I have a few questions before proceeding. I read that you only get the option of doing it once - so it better be right the first time.I've found instructions for making a repair disc, also instructions for creating recovery discs - would those be the same? The computer did not come with any os disc at all, so I'm wondering if making repair/recovery disc is possible without an os disc?
View 14 Replies View RelatedI bought a refurbished dell laptop with windows 7 on it the other day but I'm normally a linux user. I am trying to make a disc image but it is behaving a bit weirdly. I follow the steps but after it made the first disc, it tells me to insert another disc and also label it newuser pc with the date and the number 1. Not long ago, I made back up discs for a friends windows 7 desktop and it did not behave this way, it instructed to use 2, 3, etc for the next discs. I'm not sure if this thing is making any progress or not.
View 5 Replies View RelatedI have now installed win 7 three times, 64 bit and now 32 bit and have the same problem. I have read many similar problems on various forums and microsoft have been remotely on my PC for the last 2 days, and cannot resolve the I have 2 DVD RW drives, and both of them can read all types of media with no problems. When blank discs are inserted, all programs trying to access the drives just lock up. The "not responding" message will clear as soon as the disc is ejected and everything is then back to normal. If I leave the disc in the drive it will eventually recognise it after about 1.5 hours, but I can then do nothing with it.Microsoft have stated to me today that it is not an issue with Windows 7 and I should contact the manufacturers of the drives for help or updated drivers. All my drivers are showing as being up to date, and I cannot find any other drivers on the OEM websites.
Prior to purchasing, the upgrade advisor stated that I would have no issues moving from XP to WIN 7. Microsoft have informed me today that the upgrade advisor will not guarantee any piece of hardware will work correctly after win 7 install, it only indicates if any hardware will cause instability problems !!!I have an internal LITE-ON SHM-165P6S, and a USB Lightscribe drive built into my HP C8180 printer. These are 2 completely different drives that are exhibiting the same problem (only win 7 is the common theme)
Is this even possible. I thought I had made discs when I got my laptop but I cannot find them anywhere. I have tried the f8 thing but only get a windows didn't close properly message. I have tried the start +0 button and it goes to the same message. I have a repair disc and have done a full back up and removed all my files I don't want to lose. Previous dramas with HDDRECOVERY partition seems to have caused further problems I think.
View 6 Replies View RelatedMy Dell PC came with Vista installed on it and physical discs to re-install. I then got Windows 7 for free due to the timing of when I bought the PC. I presume the discs were the upgrade variety, but I don't have them in front of me. I know when I totally reformatted my harddrive recently for a problem, I had to install Vista first and then 7... leading me to believe now that the Windows 7 install discs were the upgrade and not full.I just got the "full" version of Windows 8 Pro from Microsoft DreamSpark and plan on dualbooting to a separate partition alongside Windows 7... to give it a test run.Eventually, I will probably wipe the Windows 7 partition and extend it so that I have my Windows 8 partition and a 2nd partition for files and whatnot.can I take the Vista install disc and then the Windows 7 disc and install them on another PC? I am pretty sure I am doing a full install of Windows 8 (with its own key) and therefore wouldn't be using the Vista key or the Windows 7 key that is tied to the Vista key?
View 4 Replies View RelatedHalf of the time when I try to use a RW disc more than once. In other words erase the disc to burn something new to it. Windows explorer (not responding error) is in a malfunction loop. Also during this occurrence the dvd is rendered useless for future use. These discs are new and clean with no scratches. I bought two dvd multi drives. They are identical and installed drive D: & E:. Purchased at newegg, they are sold as Liteon brand. Software identifies them as ATAPI iHAS124 B. I have thought about downloading new drivers however I have had some trouble identifying this model on Liteon's website. The other half of the time I attempt to use my DVD-RW's the event is successful.
View 6 Replies View RelatedDid a fix there recently on a HP pavilion. it suffered a hard drive failure and there was no recovery discs in situ. I purchased a replacement hd and purchased recovery discs from hp. So the build went fine and everything installed ok. Then it asked me for the product key. Now I have several Windows 7 discs but the only reason I had purchased the recovery discs is because the key sticker had faded and was illegible. So after spending 38 bucks on these discs I cant get past the activation issue. I was able to read an xp key before in the OS but when i googled this procedure for Windows 7 I ran into all kinds of key finding tools etc. I tried 4 but none of them worked, they gave me keys but activation rejected them as default keys.
View 4 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedThe hard disk of my Gateway NV78 notebook pre-installed with Windows 7 HP has crashed. I have made the recovery discs in 3 DVDs . I will be buying a new hard disk. I would like to know whether it is possible to install Windows 7 HP on the new hard disc from the recovery discs or I have to go in for a new installation disc.
View 4 Replies View RelatedI created a live CD of Ubuntu in order to install it alongside Windows 7. I began the installation, and suddenly the diagram (the one showing how much space each OS takes) stopped showing Windows. Almost immediately after, the installation kicked me back to the live CD, saying the installation failed. Still using the live CD, I saw that Ubuntu had not finished, but the little it did install was simply lingering on my drive. For some reason - probably sheer shock coupled with sleep deprivation - I didn't check to see if anything remained of Windows 7 before I shut down the computer. I then removed the live CD and booted the computer up.
After POST, I'm greeted by a screen that looks like the command prompt, but I am unable to input any commands. I first tried to access the recovery partition by pressing F9 at startup (which used to work), but it simply cuts to the aforementioned black screen. I also tried using various emergency boot discs, but none of them worked; some weren't recognized/loaded, and others partially loaded before displaying an error message. Since then, I have yet to get it to boot to a disc without an error occurring. I am going to contact ASUS and have (a) recovery disc(s) sent, but I doubt they'll do any good; I can't get the computer to load discs, and that's not even mentioning my likely-gone recovery partition. I'm also concerned that my HDD is irreparably damaged.
Does Win7's built-in defragger operate on external discs or just on the C drive?
View 6 Replies View RelatedSo I made a mistake while taking on a friend's problematic sony vaio laptop. They were wanting to install a newly purchased Kaspersky av, but after uninstalling the old version of Kaspersky there was a problem with an unresponsive usb mouse & mouse pad. I wasn't able to resolve the issue through various repair programs and manually reinstalling the driver, which was giving off the error code of not being properly installed or functioning. With owners consent, I decided to let Vaio Care to bring the computer back to factory condition. (I wish the owner had the owners manual to this thing.)I made sure to backup all of the files that the owner needed saved, but failed to make any sort of backup recovery disk for the computer. Not sure if it's too late to do so, but the computer will not boot to windows any longer. I get a white blinking cursor on a black background immediately after Vaio disappears from the screen upon bootup, but cannot do anything with it. I made a windows 7 home premium iso dvd, and when booting from it I reinstalled windows onto one of the 3 partitions on the hd (the largest of the 3 which was labeled "Primary" type). Of the other two partitions, one was labeled "Primary" and was named "System Reserved" but only 101MB, and the other was labeled "System" and was named "Recovery" and is 7.7GB. When installing, the computer does a restart but then boots up from the disk again starting the entire process over again. So I changed it to boot from the HDD, but still get the same problem of a blank cursor and windows not booting up.When attempting the System Recovery Options on the Windows 7 dvd I'm given 3 different partitions (2 of which are 400+GB, labled windows 7 operating system, and located on (D: ) Local Disk). I'm guessing this might stand for the old windows 7 from the factory, and the one I installed. The other partition is 7.7GB and labeled Start VAIO Recovery Center located on (Unknown) Recovery.System Restore, System Image Recovery, and windows Memory Diagnostic aren't doing any good. Startup Repair only gives me an issue for one of the 3 Partitions, the (Recovery Partition), and states that Startup Repair cannot repair this computer automatically, saying that the "Problem Event Name: StartupRepairOffline".
When going through command prompt I see that old data & drivers are still on the disc, but was wondering if it was too late to make some sort of a recovery disc for it? My concerns are that when I do a wipe of the drive and a clean install of Windows 7, I'm going to have many issues without having sony's factoryware installed. Am I able to make my own disk to reinstall Sony's factoryware? What's the best way of getting this computer back to fully functioning?I have access to the drivers on Sony's support site: Sony eSupport - VGN-FW510F - Support
Currently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies View RelatedWindows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View Related
