I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
View 9 Replies
my laptop (Compaq Presario CQ61) contracted a virus that did some heavy damage. So I go into the boot up menu and decide to restore the laptop back to the factory settings, just to be on the safe side so I can start afresh.Now it's on a screen that says 'Factory image recovery preperation' and it's currently copying files to restore the hard drive, but it's froze on 58%.
Last night I did the same thing and left it overnight while I went to bed, and when I woke up this morning it was still froze on 1%.
Edit: The loading bar is still there, but the place where '58%' was has gone. My mouse is moving but very slowly.
Edit: My laptop is very warm and I can't feel or hear the fan... it's going to overheat. I've had to turn it off.
The hard disk of my Gateway NV78 notebook pre-installed with Windows 7 HP has crashed. I have made the recovery discs in 3 DVDs . I will be buying a new hard disk. I would like to know whether it is possible to install Windows 7 HP on the new hard disc from the recovery discs or I have to go in for a new installation disc.
View 4 Replies View RelatedI have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
Just picked up my first Win7 computer, and it came with no discs. No surprise there, but I'd like to make some recovery discs, but not the kind that Windows says you can make. I don't want access to tools for recovery, I want access to a physical install of the OS and the drivers.
Like the discs enterprise people get when they buy their machines. I must be googling wrong, because all I'm finding are results that teach me how to create a recovery tools disc, which isn't quite what I'm looking for.
When do you burn your System Recovering Discs (SRD)?The manufacturers of PCs all seem to recommend you burn your own recovery media shortly after you perform the initial Win 7 chores, thus providing one more return path to heaven when catastrophe strikes, e.g.total loss of your primary drive and the hidden recovery partition (HRP), or some incredible error on the part of the sys-admin who one day flunks his IQ test and tries something bold and exciting. The preferred or required medium for these discs is either DVD-R or DVD+R type, something hard and physical and large enough not to get lost but also readable under most circumstances. Note that Windows 7 only lets you perform ONE SRD burn. So far all is simple. Burn a DVD. Well, not so fast. I�m getting two HP systems, one laptop (LT) and one desktop (DT). The LT will have a Blu-Ray/ DVD reader but not a burner. The DT will have a full burner. Both systems will be on a LAN so on some versions of Windows 7-64 I will be able to burn the LT SRD on the DT burner. On some other versions of Windows 7 that may not be possible.
Now here is the tricky part. Since I�m getting in two new systems I opted to get the multi-system license for Office 2010. The multi-system license gives you three installs and is much more economical than buying several separate Office vendor installs. HP does not install that pre-ship so if I make the SRD immediately after Windows 7 install it will not reflect the later Office install. Notice that with the multi-system Office license each install eats one of the allowed installs hence you don�t want to do a repeat during system recovery. So it would seem that a possible strategy might be to postpone the SRD burn, which you only get one chance to do, until after the core applications are installed. The SRD burn is like old marriage; until system death do you not part. The above questions and strategy raises the more fundamental questions: What exactly is contained on the SRD and HRP the when the SRD is burned? Does the SRD contain and recover any changes made as a result of pre-burn installs and other system activity? Should you install all your critical and trusted applications that have limited licenses before you burn the SRD thus allowing an almost pain free restore from backups?
Note: Some context. In this configuration the intent is that the LT be an almost mirror of the DT, just on a smaller scale. When both systems are linked directly on the LAN, or via a VPN link, then resources will be shared. Else work can proceed on the either with all facilities possible. Both LT and DT will have Windows 7-64 Pro. Exactly how data synchronization will occur is still an open issue.
Note: Some retailers discourage buyers who ask about recovery media. They of course want to sell a plan where they do the recovery and will do so forever � promise, cross their heart and hope to die -- or until the U.S. Bankruptcy Court settles their affairs. HP on their Web sites strongly recommends you make the SRDs but also offers to provide them in the event of need with the caveat that they may not have the SRD for your model at some future date. Consider � your system dies Monday, you decide by Tuesday morning you have no choice but to recover from scratch. You order SRD�s FedEx next-day and by Wednesday or Thursday they arrive.
When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.
View 3 Replies View RelatedWhen I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.
View 1 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
Did a fresh install of Windows 7 64-bit and all my apps, deleted Windows.old, defrag'ed and activated. Then created a SYSTEM IMAGE using Win 7 BACKUP and RESTORE, so far so good.
Win 7 and my apps take up 43.9 GB on the hard drive but the SYSTEM IMAGE it created on my external drive is only 23.7 GB. Tried it on my laptop with similar results ISO was about half the HDD. Does that sound right? Just seems the ISO should have matched the HDD GB-wise unless it compresses or something.
I perform an incremental back-up every day using the built-in backup program.
How often would you do a whole system image? I was thinking of only doing that every few months or less. Each image would be 80GB.
How can I do a system recovery without a disc ?In my drive D , there is something called " recovery " I guess it is a partition .But when I open up recovery manager , It asked me to insert a disc .
View 5 Replies View RelatedHow to Do a System Image Recovery in Windows 7 ?
View 0 Replies View RelatedI have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies View RelatedI am going to upgrade to Windows 8 Consumer Preview, so before doing so I backed up Windows 7 as a system image to my external hard drive. In doing so, I forgot that a system image includes all the files on the drive, which means it backed up about 700 GB worth of data. That's OK except I already had those files backed up individually, so now my external drive is basically out of space for future use. Instead, what I'd like to do, is do a system image of factory state without having to lose the files already on my drive. Is that possible? I could always go back to factory condition, and save the system image, but then I'd have to re-add all my programs and files after I get the Windows 8 upgrade completed. I'd rather not have to do that unless it's an emergency.
View 5 Replies View Relatedi just ran the Windows 7 systems image bu first time. completed and created recovery disk. message said completed.when i look at my external hard drive, the created file contains 0 bytes; this doesn't seem right to me based on previous imaging software I have used.
View 4 Replies View RelatedWhen I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?
If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.
I have run the "create system image" successfully until today. I have an external HD for that image file. It appears to run, goes through the steps and says it has created the image. But when I go to the external HD and click on the Image file that was created there is nothing there. It shows 0. What could I have done to do this. I even looked for that image file on my C: drive, just in case, but it is not there either.
View 4 Replies View RelatedI'm trying to make a system image and configure backups but I'm unable to select the internal drive that has the space I need.
I have a 1Tb drive portioned into C: [Windows 7] and D: [Data]
and a 750Gb drive [H:] that used to have XP on it that I want to put my backups on.
I used to dual boot XP and Windows 7.
Computer Management > Disk Management shows
C: Healthy (Boot, Page File, Active, Crash Dumo, Primary Partition)
D: Healthy (Primary Partition)
H: Healthy (System, Active, Primary Partition)
System Imaging/Backup help says you can't backup to the system (startup) drive (not sure why?)
Is there any way to change which drive is designated as the system drive?
I've removed the dual boot and used bcdedit on C: to only reference itself
What's else do I need to do to make C: the system drive?
I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
View 4 Replies View RelatedI recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies View Relatedi have a dell laptop with Windows 7 Ultimate installed on my C:/ which is 160Gigs. I also have a 2T ext Hard drive Partitioned into, 3 Partitions,F,(500G)G(500G),H(1T),Back in 10/23/11 i had made a backup of my C:/ to my F:/ with a system image. i attempted to make a End of year backup and system image to the F:/, and the backup said i could not back up to the F:/ or G:/ ( both drives has Data on them but they also have enough free space for the backups),so i decided to use the H:/ to do the backup, the backup is including the F;/ in the backup which i do not want backed up,( because it already has a system image and a backup there already) so i manually told the backup to do the C:/ and it still wants to include the F:/ in the backup, I even reset the Windows backup to the default and tried to do a first time ( let me choose what to back up) and still it wants to include the F:/ in the backup and system image,all i would like to do is a simple backup of my C;/, why does Windows insist on including the F:/ in the backup when i explicitly tell it not to, and how would i go about doing a backup of JUST my C;/ ?,Would i have to remove the initial backup an system image from the F:/?
View 3 Replies View RelatedI been backup my system to second internal hard drive E. But the system image file take almost 160 gb that take up too much space. So I want to change to backup my system to an external hard drive. Now even I did delete all backup files in E: drive. But looks like that 160 gb system image still in my E: drive. Because when I check my E: drive properties I still missing 160 gb space so I think that system image still in there somewhere. How can I completely delete that system image to free up that 160 gb space on my hard drive.
View 3 Replies View RelatedI recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
View 8 Replies View RelatedOn the Backup and Restore page, it lists the two Thread title options?-
I read that you can't restore individual files from system image, but I'm wondering if I need to create both in order to do an emergency system restore using boot disc/or... (D: drive)?
I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.
View 5 Replies View RelatedMy Windows 7 32 bit laptop has crashed. I do not have a instalation disc and like a dumb fool I never made a recovery disc. Can I make a recovery disc on a 64 bit Windows 7 that a relative of mine has. Can I just download it from a link and burn it onto a blankd dvd?
View 2 Replies View RelatedCan i still use the CD that came with the motherboard to install Windows 7 if i change my ssd and CPU?
View 6 Replies View RelatedReplaced my HD and used my Win Image BU, but Win will not start. I get the Dell screen that says Windows is loading, but then it is a blank screen.I did a second restore with same outcome. I followed System Image Recovery exactly, but cannot get that last screen to restore files I have booted from USB and from the boot disc - same results.
View 1 Replies View Relatedwhen I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies View RelatedI have 3 drives in my system,
- 64gb boot Health System Active
- 640g Apps Health Primary 376gfree
- 500g storage Healthy Primary 496gfree
I'm trying to a backup with a system image, It says for the storage drive when selected that it will not do a system image. But when I select the 640, it doesn't say it won't, but will not let me choose any files from that drive. Not sure what is going on.
