System Image Recovery
Apr 16, 2009How to Do a System Image Recovery in Windows 7 ?
View 0 Replies
ADVERTISEMENT
How To Do System Image Recovery In Windows 7
Feb 22, 2013I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
View 4 Replies View RelatedSystem Image Recovery Disk On New SSD?
May 9, 2012I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies View RelatedWindows 7 Not Starting After System Image Recovery?
Jan 4, 2013Replaced my HD and used my Win Image BU, but Win will not start. I get the Dell screen that says Windows is loading, but then it is a blank screen.I did a second restore with same outcome. I followed System Image Recovery exactly, but cannot get that last screen to restore files I have booted from USB and from the boot disc - same results.
View 1 Replies View RelatedSystem Image File Error - No Disk For Recovery Can Be Found
Nov 24, 2012I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
Factory Image Recovery With System Backup Discs Freeze At Disc?
Sep 12, 2011I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
View 9 Replies View RelatedSystem Image On External Hard Drive Is Not Accessible While Restoring PC From Image
Sep 4, 2011OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
Windows 7 Re-install From Recovery Image?
Apr 18, 2012I have a Toshiba Satellite with a badly damaged windows installation. I want to do a complete re-install but cant start the recovery image from the Windows 7 repair my computer option. I can however access the recovery image from the partition and have copied it to an external USB hard drive. Can anyone tell me how I can start the re-install from the recovery image now on the USB external HD. Can I somehow create some re-install DVDs from this recovery image?
View 4 Replies View RelatedMake Windows 7 Recovery Image From Xp?
Oct 15, 2011I use a dual boot system win 7 ultimate and xp sp3.now win 7 does not boot but can log on to xp. I did not create a system recovery image of win 7 and turned off system restore. Ihave no installation disk. So my only option is to create a system recovery image from xp.
View 4 Replies View RelatedRestoring From Recovery Image File
Oct 22, 2012I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
Factory Image Recovery - Screen Freeze?
Apr 9, 2011 my laptop (Compaq Presario CQ61) contracted a virus that did some heavy damage. So I go into the boot up menu and decide to restore the laptop back to the factory settings, just to be on the safe side so I can start afresh.Now it's on a screen that says 'Factory image recovery preperation' and it's currently copying files to restore the hard drive, but it's froze on 58%.
Last night I did the same thing and left it overnight while I went to bed, and when I woke up this morning it was still froze on 1%.
Edit: The loading bar is still there, but the place where '58%' was has gone. My mouse is moving but very slowly.
Edit: My laptop is very warm and I can't feel or hear the fan... it's going to overheat. I've had to turn it off.
Attempted Minimized Image Recovery Failed
Sep 4, 2012In preparation for sending my laptop to HP for a hinge replacement, I decided to backup all my data (via System Image). My plan was to then perform a Minimized Image Recovery: so as to wipe off all my data, but still keep the computer running nicely.The attempt to wipe my data failed.Whenever I try to boot my computer now, I am presented with "Windows Boot Manager" [see attached image]I don't have an OS disk.
View 2 Replies View RelatedRecovery Disk Cannot See Image On Network Drive
Dec 19, 2012my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.
Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..
I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.
Replacing Hard Drive - Factory Image Recovery?
Dec 10, 2011I have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
Recovery Using Disk Image - Only Windows 7 Volume Restored
Sep 8, 2011I periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.
View 7 Replies View RelatedDual Boot Hard Drive And Image Recovery?
Jan 11, 2013I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies View RelatedSystem Image On System Restore Disk Not Reading After Crash?
Oct 2, 2012Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedUsing Recovery Manager To Reset Laptop - Image Failed To Copy Across
Nov 3, 2012I was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies View RelatedHow To Make A System Image For A Dual Boot System
May 8, 2012I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedCannot Create A System Restore Disc(s) (Cannot Do A System Recovery)
Mar 21, 2011I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
Is A System Backup The Same As A System Image
Aug 30, 2012is a system backup the same as a system image?
View 4 Replies View RelatedDone A "system Recovery" But Saw One Of It Has A "mini System Recovery" Option?
Jul 7, 2012I decided to do a system recovery for my laptop. I've already done a couple of experiments before and from what I remember the first time I done a system recovery, the partition where my personal files where saved did not get deleted.The only thing that was "system recovered" was the partition where the OS was located. Yesterday, I again decided to do a recovery but this time, the partition where I have my files got deleted and the space it had "returned" to the OS partition. Orignally, I shrunk the OS partition so that I can have space for my partition for my personal files.If it helps, I've done a "system recovery" but saw one of it has a "mini system recovery" option. What is the difference?
View 1 Replies View RelatedSystem Image Of Ext HDD?
Nov 30, 2012Is it possible to make a system image of "only" my external drive without inlcuding my internal drive? Windows 7
View 1 Replies View RelatedCreating A System Image
May 8, 2011When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
View 2 Replies View RelatedCreate System Image?
May 2, 2012I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
View 6 Replies View RelatedRecovering System Image?
Sep 11, 2011I made a system image backup from my ssd,then I bought another ssd to put the system image on,I tried when the 2nd ssd was completely empty; it saysthere is no disk to recover to ( or something like that )then I installed clean version of windows on the 2nd ssdafter that I tried restoring via the system repair disc but it kept telling me the same message
View 6 Replies View RelatedCreate A System Image?
Nov 10, 2011i am trying to back up and create a system image but evert time i do i get this error THE SYSTEM CANNOT FIND THE FILE SPECIFIED OX87007002, i have window 7 64 bit professional i think the problem is with this system reserved partition
View 6 Replies View RelatedUsing System Image On A New Ssd Drive And More Ram?
Sep 3, 2012I recently brought a new ssd disk because the old one was running out of space. Since I have created a system image I was of just restoring this to the new ssd disk but I have also brought some new ram as well and will install this too. Will this cause problems with using system image.
View 9 Replies View RelatedCreating System Image?
Oct 16, 2012After my problems reported elsewhere, I decided to make a system image after I got things working. This was recommended by inference by one of the gurus who responded to my questions.So I got the system up again and I needed to learn about system images. So I hit F1 and read about creating a system image. Clicked here, clicked there, specified by external hard drive and told it to only include my system drive C:. Whir, whir, whir . . .. system image created.Now, I've cleaned the system of any possible Malware, so I want to create a new image of my system drive. So, I click here, click there and specify my external hard drive but NOW it won't let me include only drive C:, it wants to include my data drive, E:. The check box for E: is greyed out so I can't uncheck it.
View 8 Replies View RelatedRed X Cannot Perform System Image
Feb 9, 2013I know how to perform a System Image, but now can't do so. I am using a Seagate Expansion External hard drive. Somewhere along the line there was a glitch and a red X (disconned) appeared on the drive icon in back up. I tried the same drive in an identical Windows 7 computer. Now I have red X's on both computers. The drive is fine, wiped and formatted, and the computer recognizes it. Still the red X on both computers. I can't get it off. The "start back up" tab is grayed out.
View 2 Replies View RelatedRed X And Non Working System Image?
Feb 16, 2013I am using 2 identical Dell Studio XPS 8000 desktop computers (wit Microsoft USB Natural Keyboards), 1TB hard drives, Windows 7, 64 bit platform) and I had no problem in the past making System Images. I have 2 separate external hard drives (1 is a 1TB Seagate Expansion External Hard Drive, the other is a 160GB hard drive.)It seems the System Image is approximately 149.GB, so will fit.I thought you had to erase the previous system image to put a new one on the same hard drive, but both computers said the drive was disconnected, and put a big red X on the drive location. Turns out I had to reformat the empty drives. I did, and the computers recognize both dries when they are connected, but the red X remains, and attempts to make a new system image fail. I am offered the "start backup" box, I can click on it, and all seems to be going well until the fill bar (green) stops about 1/6th of the way across, it stops there and j ust spins, not filling anymore, and if left long enough, it turns completely red and says the process failed.
View 4 Replies View Related
