Recovery Disk Cannot See Image On Network Drive
Dec 19, 2012
my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.
Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..
I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.
View 9 Replies
ADVERTISEMENT
May 9, 2012
I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies
View Related
Sep 8, 2011
I periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.
View 7 Replies
View Related
Nov 24, 2012
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
View 8 Replies
View Related
Dec 10, 2011
I have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
View 14 Replies
View Related
Jan 11, 2013
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies
View Related
Sep 24, 2012
I have a compac (HP) laptop (CQ61-41us notebook), running WIN7 home premium, 64 bit. Aside from the normal file backup via the western digital software, I have several windows 7 generated iso images of my laptop stored on my external WD drive. Using windows repair disk, my computer does not recognize the external drive to access the disk images. It just asks to insert the last disk into optical drive. My images are on a folder on my external drive. There is no option to navigate to it! This is the first time I've needed to restore an image, and I can't access them! This should be an easy operation that could be started in a few minutes. I have been screwing around with this for more than 24 hours!
View 3 Replies
View Related
Aug 27, 2009
I installed 7 on my Dell laptop that has no CD-ROM drive. I created a partition (D and set it to Active, installed from that partition, doing a quick format over Vista (C.
All was fine and dandy, but I was getting some boot option, I'm assuming because the Active drive had the install files on it. No problem, I'll set the C: partition to Active.
Reboot, should go away right? Wrong. "Bootmgr is missing."
No problem, there has to be a way to fix this. I'll put the CD in and recover... Or not!
What I have is a 2 gig USB thumbdrive, is there anyway to fix this problem with that? If not, what are my options.
Using the factory Dell restore to get Vista back won't work, I bought the laptop secondhand and they screwed that up.
View 1 Replies
View Related
Oct 20, 2011
to create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.
View 2 Replies
View Related
Mar 29, 2012
I just got a new computer and this is my first experience with Windows7 and in Disk Fragmenter the recovery drive is fragmented 2% (it wasnt earlier) and if I click analyze or defrag the screen just flickers and ignores me
View 1 Replies
View Related
Apr 16, 2012
I have a HP Pavilion with Windows 7 Premium 64, and have my computer back up daily, with weekly system image back ups using the Windows back up utility. This backs up to a DLink DNS 323 network storage device. Last Friday my hard drive failed, and I didn't feel too bad becuase of my back ups. Yesterday after replacing the hard drive I tried using the System Repair Disc to restore the System Image, but couldn't locate anything on the network to restore. I checked with DLink support and they said this is a Windows issue. Hoping I can get some ideas how to proceed and get my data on the new hard drive. THe DLink site suggested that I try everything out before I need it to make sure it all works as planned. I would have no idea how to try out the System Repair Disc and restore the System Image without having a blank hard drive or jeopardizing the data on my current drive.
View 9 Replies
View Related
Jul 11, 2012
I have an Acer Iconia W500 that came preinstalled with Windows 7 32bit Home Premium. I made recovery discs from the tablet before installing Windows 8 on it, which runs great. What I would like to do, if possible, is to use those Windows 7 restore discs and restore them to an external hard drive and be able to boot from it and run the original Windows 7 that came preinstalled. The reason I am wanting to do this, as there were some programs, drivers, and other things that I cannot download from Acer or retrieve from the restore discs, and can only access from the OS if it is actually running.
View 3 Replies
View Related
Nov 22, 2012
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies
View Related
May 29, 2012
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies
View Related
Jan 15, 2013
I recently purchased a new Alienware m14x r2 which came with windows 8 single language, English pre installed. However I want to replace the hdd with a newer hybrid drive, can I create a recovery disk and reinstall the os on the new hdd? I have created 5 recovery DVDs.
View 4 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Mar 14, 2012
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
View 6 Replies
View Related
Apr 16, 2009
How to Do a System Image Recovery in Windows 7 ?
View 0 Replies
View Related
Apr 18, 2012
I have a Toshiba Satellite with a badly damaged windows installation. I want to do a complete re-install but cant start the recovery image from the Windows 7 repair my computer option. I can however access the recovery image from the partition and have copied it to an external USB hard drive. Can anyone tell me how I can start the re-install from the recovery image now on the USB external HD. Can I somehow create some re-install DVDs from this recovery image?
View 4 Replies
View Related
Feb 22, 2013
I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
View 4 Replies
View Related
Oct 15, 2011
I use a dual boot system win 7 ultimate and xp sp3.now win 7 does not boot but can log on to xp. I did not create a system recovery image of win 7 and turned off system restore. Ihave no installation disk. So my only option is to create a system recovery image from xp.
View 4 Replies
View Related
Oct 22, 2012
I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
View 3 Replies
View Related
Apr 9, 2011
my laptop (Compaq Presario CQ61) contracted a virus that did some heavy damage. So I go into the boot up menu and decide to restore the laptop back to the factory settings, just to be on the safe side so I can start afresh.Now it's on a screen that says 'Factory image recovery preperation' and it's currently copying files to restore the hard drive, but it's froze on 58%.
Last night I did the same thing and left it overnight while I went to bed, and when I woke up this morning it was still froze on 1%.
Edit: The loading bar is still there, but the place where '58%' was has gone. My mouse is moving but very slowly.
Edit: My laptop is very warm and I can't feel or hear the fan... it's going to overheat. I've had to turn it off.
View 7 Replies
View Related
Sep 4, 2012
In preparation for sending my laptop to HP for a hinge replacement, I decided to backup all my data (via System Image). My plan was to then perform a Minimized Image Recovery: so as to wipe off all my data, but still keep the computer running nicely.The attempt to wipe my data failed.Whenever I try to boot my computer now, I am presented with "Windows Boot Manager" [see attached image]I don't have an OS disk.
View 2 Replies
View Related
Jan 4, 2013
Replaced my HD and used my Win Image BU, but Win will not start. I get the Dell screen that says Windows is loading, but then it is a blank screen.I did a second restore with same outcome. I followed System Image Recovery exactly, but cannot get that last screen to restore files I have booted from USB and from the boot disc - same results.
View 1 Replies
View Related
Mar 4, 2011
I am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies
View Related
Nov 3, 2012
I was using recovery manager to reset my laptop (ACER 5470G) back to factory settings. The image failed to copy across. I then got Boot Mgr is Missing - I have tried, everything it states on the internet and even bought some software WIN RE to carry out the recovery but nothing works. I have tried to reinstall W7 ISO and W7 full installation software but it all has failed. The message i get with the full install disc and iso is that the system i have to select a drive PQ, F and C, the only option I have is C, but when I try it states it can't do it. I tried Ubuntu and it did work, so I presume the HDD is ok. I did have Zone Alarm Data-lock installed on it and I don't know if that is preventing the re-install. I tried to install XP, but that just dies out.
View 1 Replies
View Related
Sep 12, 2011
I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
View 9 Replies
View Related
Oct 2, 2011
Is there any way to take a disk image within Windows 7 or do I need to buy disk imaging software like Acronis?
View 9 Replies
View Related
Jul 20, 2009
I have been using build 7229, and it has been absolutly brilliant.
Now, apart from that, i have had general probs, one of which forced me to reinstall everything (Kaspersky 6.0 does not work properly with win 7, well i did'nt with me, had a BSOD when i rebooted, one of which explained a process that had been terminated, process that the CPU runs, anyway the HDD is formatted and i restarted again), this has now forced me to make a disk image incase something happens.
No what i wanna know is, can i use that disk image or a back-up and flash that onto an RTM version (when there released), so's i don't have to reinstall everything. i.e. the back-up or disk image does it all for me. Or is this not possible.
View 4 Replies
View Related
Jan 29, 2012
How to copy my laptop win7 hdd to a ssd which can later be used as boot device for this laptop
View 1 Replies
View Related
