Restoring Windows 7 Recovery Disk To External Hard Drive Or USB?
Jul 11, 2012
I have an Acer Iconia W500 that came preinstalled with Windows 7 32bit Home Premium. I made recovery discs from the tablet before installing Windows 8 on it, which runs great. What I would like to do, if possible, is to use those Windows 7 restore discs and restore them to an external hard drive and be able to boot from it and run the original Windows 7 that came preinstalled. The reason I am wanting to do this, as there were some programs, drivers, and other things that I cannot download from Acer or retrieve from the restore discs, and can only access from the OS if it is actually running.
to create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.
Just recently, my main 1TB internal hard drive crashed and is not bootable. I luckily backed up my hard drive about a month ago on an external 500Gig hard drive. Though, I am having trouble finding how to restore from my from my back up hard drive.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
My laptop does not read my new external hard disk drive using USB connection. The sign "Safely remove hardware and eject media" is there. But the icon of the hard drive doesn't appear in the "Computer".
I use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
I just bought a new ASUS computer with Windows 7. I have a Macbook Pro and would like to transfer my photos and music onto my new computer. I have 2 external hard drives that work perfectly fine on my mac as well as other PCs. When I plug either of my external hard drives in they are recognized in device manager and say they are working properly but are not recognized in disk manager or under my computer...
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I recently bought a netbook for use at University. My University recommended and supplied an antivirus software, which prevented my computer from accessing the internet. After phoning the anti virus support, they said it wasn't their problem and after phoning the university, they told me that they needed to restore the computer to factory setting (which I suspected all along)After booting the advanced boot menu on start up, I first tried starting in the last known good configuration, that didn't help, but then it told me to boot with the reset CD in the disk drive. I have the disk, however on my netbook, I don't have a disk drive!
My external hard disk up until a few weeks ago had been working perfectly. The next time I used it - windows 7 will not recognise it. I have tried different USB ports and computers. But it doesn't seem to work. It doesn't show up in device manager or disk manager. Its like nothing is plugged in. I tried switching hard disk cases and power supplies. But still nothing. The hard disk seems to try and run every so often, the light flashed red and it makes whirring noises as if it was connecting to the computer.
I dont know what else to do ? And it has almos 1500 GB of data.
My acer laptop using windows 7 will not startup. When I start laptop it start running. While window black screen is running a blur box window comes up stating hard disk security in this screen it state it is locked. The only way to get out of this screen is to hit esc the only thing working is the F2 I can use this change settings what ever. However, none of the F12 recovery will complete.
I'm using Dell studio 1558 laptop with Windows 7 and 8 in dual boot.I've 2 external hdd, WD my passport 0740 and Sony HD E1.well in windows7, these 2 ex-hdd or any one of them doesnt go to stand by,but in windows8, they go to stand by (stops spinning, indicator led goes off).In both, windows 7 & 8, same time duration for "turn off hardisk after" are selected, and all other power options are same, I've checked.Even i face the same issue with my windows 7 in desktop.What should i do to make them go to stand by in windows 7 ?
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I recently installed a program to allow my PC to read Mac formatted hard disks.However, it did not work and from then forward, my PC is unable to detect all other external hard disks, I've tried a few. The drives are not even showing on disk management. The lights on the hard disk do light up with I plug them in but nothing happens.
I have Windows 7 Professional 64Bit installed on a 250GB internal hard drive. I also have a 750 GB secondary drive installed in the system. When I connect an external hard drive to the computer and try to transfer some files (in this case a Windows 7 SDK DVD iso), the external hard drive self ejects and the transfer gets interrupted. The very next second the hard drive comes back on. I have made sure that it is not the external hard drive at fault as the same issue occurs with my flash drive and also my friend's external hard drive (with different files.) I usually did not care and retry it, but recently I have been loosing files when the hard drive ejects itself and it has started to get annoying. Sometimes the file just dose not transfer no matter how many times I try. All that happens is the hard drive gets disconnected and connected again till I just let it be.
