Restoring To Factory Settings Without A Disk Drive?
Sep 18, 2012
I recently bought a netbook for use at University. My University recommended and supplied an antivirus software, which prevented my computer from accessing the internet. After phoning the anti virus support, they said it wasn't their problem and after phoning the university, they told me that they needed to restore the computer to factory setting (which I suspected all along)After booting the advanced boot menu on start up, I first tried starting in the last known good configuration, that didn't help, but then it told me to boot with the reset CD in the disk drive. I have the disk, however on my netbook, I don't have a disk drive!
i have tried to do a factory reset on afriends hp mini 110. All seemed to be going to plan until i got the message "set up is preparing your account for the 1st time" The comp then goes to the welcome page before displaying the message " windows could not complete the installation.to install windows on this computer restart theinstallation"I have tried everything over the last couple of days but now think there may be a problem with the hard drive.
I am currently running an Asus Laptop with Windows 7 Home Premium 64bit and I want to know how to restore the computer to just factory settings. The computer got ridiculously slow, so I figured I'd take this route. I don't have an installation disc, nor do I have a recovery disc. I bought the laptop at Best Buy.
I want to restore my laptop to factory settings, but I don't have a Windows 7 installation CD. I was just wondering if, when I restore to factory settings (since I don't have another point to restore to), will my laptop be wiped completely? Since I don't have any installation CDs or anything, I don't want to restore it to factory settings if it'll wipe it completely.will it wipe my laptop blank or restore it to the point it was at when I started it following purchasing it (all the basic programs and such already installed)?
I bought a HP Laptop and am unsatisfied with the battery Life. Under the terms of the retailer, I will not be able to return the laptop if it has been 'used'. The only thing I have done is turn the machine on and set up the user account for first use e.g "Mary" and browse a few websites. Is it possible to restore the laptop to the factory settings as I received it, meaning that if the retailer turns on the laptop he/she will be asked to set up a Windows 7 user account for the laptop and also things such as HP user/laptop registration will be prompted again etc? (So that they get the impression that the laptop has not even been used? The retailers are a major PC and Laptop selling company, would they be able to know if the laptop had been set up and used?
There exists a partition in the hard drive solely for recovery purposes. Providing that the retailer will think that the laptop has never been used, and will be asked to set up a new windows account and asked welcome to your new windows laptop (or whatever that comes up) and the bloatware that comes with the HP laptop is all there, how would I go about restoring it to that 'new laptop' setting?
so i turn off my laptop for the night. I come home from school the next day i turn it on.My laptop freezes, after a while a blue screen flashes and the computer turns off. Then i turn on my laptop again it does the same thing.So i decided to i have to restore my laptop.I press f8 and it brings me to the menu i click on repair your computer then it brings me to the artistic blue screen background but nothing pops up. I know there's supposed to be a box that pops out that gives you some sort of option but it doesn't. All that shows is the mouse cursor (i'm able to move it) and the blue background screen.
I'm certain that this has been answered before but I am aware that for certain computers it can be quite different.My question is how do I restore my computer to factory settings? I have a Gigabyte GA-Z77-D3H, I've looked all over the manual and still can not figure out exactly how. I always try to access my BIOS but there seems to be no recovery management on it. I have my Win7 reinstallation disc and Gigabyte Drivers installation disc if that helps.I'll reinstall windows if I have to, but only if it'll reset everything. I have a 60GB Boot Drive and a 1TB hard drive.
I just did a factory restore on my computer. Now it's asking for a user name as well as a password. I used what I'm sure was my user name and password, but it isn't working. I can't find my password reset disk.
I got the occasional blue screen of death before, so I reset to factory settings. It didn't help, and may have made the issue even worse, though I haven't used the computer much since I just got a laptop. I have windows 7 64 bit. I had gotten the haplii virus (which redirects my google searches to a different site, it later changed to link to a different site instead) and failed to remove that completely, so I am not sure if that could be causing it or no.
I am trying to recover my ASUS K52D Notebook PC to factory settings. I am currently running Windows 7 operating system. I do have the Driver & Utility Ver.1.0 disk, but I have lost the System recovery disk that was made by the store where I purchased my laptop from. I have tried recurring it using the partition file thing that's on my computer, but I received an error message. I am wondering, is there a way to recover my Notebook to factory settings without using the partition or the recovery DVD?
I have an Acer Iconia W500 that came preinstalled with Windows 7 32bit Home Premium. I made recovery discs from the tablet before installing Windows 8 on it, which runs great. What I would like to do, if possible, is to use those Windows 7 restore discs and restore them to an external hard drive and be able to boot from it and run the original Windows 7 that came preinstalled. The reason I am wanting to do this, as there were some programs, drivers, and other things that I cannot download from Acer or retrieve from the restore discs, and can only access from the OS if it is actually running.
When pressing alt f10 it's taking me to partition 3 instead of 1 and saying no execute optin mint and then taking me right to windows. I have I have a nasty Trojan svchost . I unhid the recovery petition but I cannot mark it as active. How do I factory retore it manually?
I am attempting to restore my 3 year old HP desktop back to factory condition. My question is my computer shipped with vista and I later upgraded to windows 7. Will recovering the computer to original factory condition roll me back to vista and delete windows 7?
My computer (details below) is new and after using it for two weeks a message appeared on the screen last night asking me if I would like to create a set of DVD discs that could be used to restore it to factory state if needed. It cautioned that this set could only be made once. Since I was busy at the time I closed the message.
I have got Dell Studio 1558 Laptop. When I received my laptop, the full 480 GB was in a single drive and using device manager i splitted into 3 drives. Now, if I use Dell Restore to factory image option should it have some effect as the original c drive when shipped is currently less. Just want to know this as I will be using this feature.
My computer has had sporatic blue screens at the end of windows 7 bootup. The diagnostic tools will not run. Gateway recovery management will run, but when I select the option for a restoration, it says my hard drive is not in the factory default. I'd like to just restore the computer- how to reset the hard drive factory default or to get around this error?
I have an Inspiron N4010, and one night, it worked perfectly, and the next morning it wouldn't start. So I had to restore my PC to the factory image. Now, many programs on my computer crash only minutes, or even seconds, after executing them. I do not understand why. I have not deleted any files, I have not messed with anything, and I have kept my PC up to date, as well as protected. There is no reason for why my computer runs the way it does.
Ive owned a dell studio 1558 laptop for almost 2 years now and have recently been experiencing some overheating issues, among my many solutions "new thermal paste, cleaning the inside" and a virus scan using Avast, which discovered a four digit number of corrupted files followed by their deletion and subsequent problems due to now missing some .dll files making me unable to run anything or access the internet. Ive decided I should restore the laptop to its factory settings which I believe I have done before. The problem now is that once I reach the Advance boot menu using F8, I press enter on the "repair your computer" option which is followed by a bar saying windows is loading files, lasting one second, and then windows loads up and nothing changed.
Dell is not helping me at all, this is the 3rd time this has happened on the same laptop and idk what to do I cant repair it, it says
Problem Event Name: StartupRepairOffline Problem Signature 01: o.o.o.o Problem Signature 02: o.o.o.o Problem Signature 03: unknown Problem Signature 04: o Problem Signature 05: unknown Problem Signature 06: 1 Problem Signature 07: unknown OS Version: 6.1.7600.2.0.0.256.1 Locale ID:1033
I'm fixing my sisters computer, It froze on her, when she tried to start it up again it went into some sort of system repair mode and after about 20hrs of this (no joke) it gave me the option to restore the computer to factory settings, it also gave me the option to install some sort of backup on the hard drive, however i tried this and it said there was no room on the hard drive (if i didn't know any better I'd say the problem was with the hard drive) i went ahead with the system recovery as it seemed to be the only way to fix the computer (i know i sound like an oaf) now the computer is showing me a screen which states that i need to insert my windows installation disc, however the laptop has no disc drive!
Additional information
HP Pavilion dm1-4004sa AMD Dual-Core E-450 processor 4GB memory 320GB Hard Drive
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.
I recently had a virus/malware attack on my system, removed it, but the system is damaged (Security center & updates cant be started etc) . I want to restore the comp using the acer feature "restore to factory settings". But I wonder, must I have a Win7-installation CD after the restore?? Because the computer came with preinstalled Windows 7 when I bought it. Keep in mind that it's a factory settings restore not a complete format c (i think) I've done a backup on hardrive "D" of my current system in case of anything going wrong. If a Cd is required, could you tell me another way to format the comp without buying the CD? My security center is damaged, so restore to point doesnt work either. If you got any solutions to how to start security center except setting it to "automatic" in services.msc (Since this doesnt work), please post 'em.
I have a dell Inspiron n7010 and im trying to reformat my computer. I backed up all my personal files into an external hdd. However when I try to restore my laptop to its factory settings, I get stuck. Upon booting up my computer I press f8 to get into the advanced boot menu. From there I select system repair but after selecting that, it always gets stuck at windows is loading files. It doesn't look my computer is loading anything either and it doesn't make sounds as of it were.
For a variety of reasons, I want to do a clean install on my laptop, which is a Dell Studio XPS with Windows 7. I don't have any Windows disks (it's 2 years old and I'm fairly sure I wasn't provided any), so I'm trying to do it through advanced boot options. When I hit F8 during startup and select repair, I am shown the screen "Windows is loading files..." and then the system starts as usual, rather than giving me options for a fresh install, which the description (and every set of instructions I've seen) would suggest.
So im looking to restore my PC to its factory settings so i saw from a video that says all i have to do is go to, Control panel->System and security->Backup And Restore->Recover system settings or your computer->Advanced recovery methods->Reinstall Windows (requires Winodows installation disc) so yeah, will this work? im pretty sure the disc i have that came with my comp is the right disc, on the disc it says"microsoft windows 7 Reinstallation DVD", Windows 7 Home Premium 64-bit.
let me know if this is the right disc and if this is the right way to reset to factory settings that would be super awesome!!!!
