Restoring Gateway Desktop To Factory Specs
Nov 4, 2012
My computer has had sporatic blue screens at the end of windows 7 bootup. The diagnostic tools will not run. Gateway recovery management will run, but when I select the option for a restoration, it says my hard drive is not in the factory default. I'd like to just restore the computer- how to reset the hard drive factory default or to get around this error?
View 6 Replies
ADVERTISEMENT
Nov 4, 2012
I have a Gateway Windows 7 desktop that is having sporatic blue screen of death during bootup. The diagnostic tools do not work. When i used the Gateway recovery management, I got the menu, but it wouldn't let me; it says that the hard drive is not in the factory default.
View 4 Replies
View Related
Dec 9, 2011
My daughters ASUS K52F needed to be rebuilt to factoy specs. (I have done this before on an ACER and a GATEWAY without issues.)I started the restore and loaded each of the 4 disks when requested and it made it to 100% and I pressed on finish when requested and the computer restarted itself but then did not do anything but load the black screen with the ASUS logo.I must have missed a step but I do not know what that is.Has anyone else had this issue or know what I need to do now to get windows to boot/load?
View 4 Replies
View Related
Jul 22, 2011
i have tried to do a factory reset on afriends hp mini 110. All seemed to be going to plan until i got the message "set up is preparing your account for the 1st time" The comp then goes to the welcome page before displaying the message " windows could not complete the installation.to install windows on this computer restart theinstallation"I have tried everything over the last couple of days but now think there may be a problem with the hard drive.
View 5 Replies
View Related
Mar 13, 2011
I am currently running an Asus Laptop with Windows 7 Home Premium 64bit and I want to know how to restore the computer to just factory settings. The computer got ridiculously slow, so I figured I'd take this route. I don't have an installation disc, nor do I have a recovery disc. I bought the laptop at Best Buy.
View 3 Replies
View Related
Jul 6, 2012
I want to restore my laptop to factory settings, but I don't have a Windows 7 installation CD. I was just wondering if, when I restore to factory settings (since I don't have another point to restore to), will my laptop be wiped completely? Since I don't have any installation CDs or anything, I don't want to restore it to factory settings if it'll wipe it completely.will it wipe my laptop blank or restore it to the point it was at when I started it following purchasing it (all the basic programs and such already installed)?
View 5 Replies
View Related
Jul 13, 2012
how do i restore to factory settings. I dont want to have to reinstall all the drivers
View 9 Replies
View Related
Feb 27, 2011
I bought a HP Laptop and am unsatisfied with the battery Life. Under the terms of the retailer, I will not be able to return the laptop if it has been 'used'. The only thing I have done is turn the machine on and set up the user account for first use e.g "Mary" and browse a few websites. Is it possible to restore the laptop to the factory settings as I received it, meaning that if the retailer turns on the laptop he/she will be asked to set up a Windows 7 user account for the laptop and also things such as HP user/laptop registration will be prompted again etc? (So that they get the impression that the laptop has not even been used? The retailers are a major PC and Laptop selling company, would they be able to know if the laptop had been set up and used?
There exists a partition in the hard drive solely for recovery purposes. Providing that the retailer will think that the laptop has never been used, and will be asked to set up a new windows account and asked welcome to your new windows laptop (or whatever that comes up) and the bloatware that comes with the HP laptop is all there, how would I go about restoring it to that 'new laptop' setting?
View 11 Replies
View Related
Feb 1, 2012
so i turn off my laptop for the night. I come home from school the next day i turn it on.My laptop freezes, after a while a blue screen flashes and the computer turns off. Then i turn on my laptop again it does the same thing.So i decided to i have to restore my laptop.I press f8 and it brings me to the menu i click on repair your computer then it brings me to the artistic blue screen background but nothing pops up. I know there's supposed to be a box that pops out that gives you some sort of option but it doesn't. All that shows is the mouse cursor (i'm able to move it) and the blue background screen.
View 2 Replies
View Related
Feb 21, 2012
When pressing alt f10 it's taking me to partition 3 instead of 1 and saying no execute optin mint and then taking me right to windows. I have I have a nasty Trojan svchost . I unhid the recovery petition but I cannot mark it as active. How do I factory retore it manually?
View 1 Replies
View Related
Apr 15, 2012
my emanchine was shut off when i was restoreing it back to factory and now it said i need a recovering disk for it and i don`t have one
View 5 Replies
View Related
Jun 21, 2012
I am attempting to restore my 3 year old HP desktop back to factory condition. My question is my computer shipped with vista and I later upgraded to windows 7. Will recovering the computer to original factory condition roll me back to vista and delete windows 7?
View 20 Replies
View Related
Nov 1, 2012
I'm certain that this has been answered before but I am aware that for certain computers it can be quite different.My question is how do I restore my computer to factory settings? I have a Gigabyte GA-Z77-D3H, I've looked all over the manual and still can not figure out exactly how. I always try to access my BIOS but there seems to be no recovery management on it. I have my Win7 reinstallation disc and Gigabyte Drivers installation disc if that helps.I'll reinstall windows if I have to, but only if it'll reset everything. I have a 60GB Boot Drive and a 1TB hard drive.
View 4 Replies
View Related
Feb 14, 2011
My computer (details below) is new and after using it for two weeks a message appeared on the screen last night asking me if I would like to create a set of DVD discs that could be used to restore it to factory state if needed. It cautioned that this set could only be made once. Since I was busy at the time I closed the message.
View 8 Replies
View Related
Jan 14, 2011
I have got Dell Studio 1558 Laptop. When I received my laptop, the full 480 GB was in a single drive and using device manager i splitted into 3 drives. Now, if I use Dell Restore to factory image option should it have some effect as the original c drive when shipped is currently less. Just want to know this as I will be using this feature.
View 4 Replies
View Related
Sep 18, 2012
I recently bought a netbook for use at University. My University recommended and supplied an antivirus software, which prevented my computer from accessing the internet. After phoning the anti virus support, they said it wasn't their problem and after phoning the university, they told me that they needed to restore the computer to factory setting (which I suspected all along)After booting the advanced boot menu on start up, I first tried starting in the last known good configuration, that didn't help, but then it told me to boot with the reset CD in the disk drive. I have the disk, however on my netbook, I don't have a disk drive!
View 9 Replies
View Related
Oct 22, 2012
i have my restore data on my laptop but i dont have data restore software so
View 2 Replies
View Related
Dec 19, 2011
I have an Inspiron N4010, and one night, it worked perfectly, and the next morning it wouldn't start. So I had to restore my PC to the factory image. Now, many programs on my computer crash only minutes, or even seconds, after executing them. I do not understand why. I have not deleted any files, I have not messed with anything, and I have kept my PC up to date, as well as protected. There is no reason for why my computer runs the way it does.
View 1 Replies
View Related
Jun 20, 2012
Ive owned a dell studio 1558 laptop for almost 2 years now and have recently been experiencing some overheating issues, among my many solutions "new thermal paste, cleaning the inside" and a virus scan using Avast, which discovered a four digit number of corrupted files followed by their deletion and subsequent problems due to now missing some .dll files making me unable to run anything or access the internet. Ive decided I should restore the laptop to its factory settings which I believe I have done before. The problem now is that once I reach the Advance boot menu using F8, I press enter on the "repair your computer" option which is followed by a bar saying windows is loading files, lasting one second, and then windows loads up and nothing changed.
View 3 Replies
View Related
Feb 23, 2012
Dell is not helping me at all, this is the 3rd time this has happened on the same laptop and idk what to do I cant repair it, it says
Problem Event Name: StartupRepairOffline
Problem Signature 01: o.o.o.o
Problem Signature 02: o.o.o.o
Problem Signature 03: unknown
Problem Signature 04: o
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unknown
OS Version: 6.1.7600.2.0.0.256.1
Locale ID:1033
View 5 Replies
View Related
Mar 30, 2012
I just did a factory restore on my computer. Now it's asking for a user name as well as a password. I used what I'm sure was my user name and password, but it isn't working. I can't find my password reset disk.
View 4 Replies
View Related
Jan 15, 2013
My lenovo laptop crashed and I need to restore it how do I do this in plain
View 4 Replies
View Related
Aug 18, 2012
I got the occasional blue screen of death before, so I reset to factory settings. It didn't help, and may have made the issue even worse, though I haven't used the computer much since I just got a laptop. I have windows 7 64 bit. I had gotten the haplii virus (which redirects my google searches to a different site, it later changed to link to a different site instead) and failed to remove that completely, so I am not sure if that could be causing it or no.
View 1 Replies
View Related
Jun 14, 2012
Is there anything like this Vista Forums - View Single Post - Solved stop icons from moving after bootup ? for Windows 7? If not, can someone point me to another registry tweak or program that accomplishes the same thing? I've searched both the Win 7 forum and the internet and couldn't find anything remotely close.
View 5 Replies
View Related
Dec 19, 2011
I have two identical computer monitors running in 1080p each using a NVIDIA GTX460SE video card. I have all the icons on the left monitor (as in, the main one), but had them arranged specially and on all parts of the screen, not just the leftmost area.
When moving home from college for holiday break, I plugged the monitors in backwards (as in, monitor 1 to monitor 2's jack and vice versa) - so I unplugged both and corrected it. At some point, Windows freaked out and alphabetized all of my icons and shoved them over to the left. Now, my ordinary routine for fixing the broken alignment is a simple System Restore, as it does keep the desktop icon locations. However, on each of the 5 restore points I have, it keeps giving me these errors that a certain file couldn't be found in each (not the same one each time).
I'm curious if there's a way to manually grab the desktop icon location out of the system restore backups if that's ALL I need and not the entire restore image. I know the backups are in C:/System Volume Information, but I have NO idea where desktop icon locations are stored... I would have assumed it was in desktop.ini but nope!
I can't system restore at all... and installing the third-party solutions don't help as the icons are already screwed up. If it's just a registry key or file somewhere, in theory I could extract it from one of those backups and use it?
View 3 Replies
View Related
Jul 27, 2012
have a Gateway desktop pc which freezes when I leave it idle, usually within 5-10 minutes it'll freeze.My hijackthis report can be seen at . can any let me know what's wrong?Mod Edit: Removed link to HJT log, not used/allowed in this forum - Hamluis.I've checked the cpu temp as well as ran spyware/antivirus to no avail.
View 2 Replies
View Related
Feb 18, 2013
I did a restore to factory default then it says it's missing something. Then I restarted it now it says missing operating system. The I have a gateway desktop.
View 5 Replies
View Related
Apr 22, 2012
So I just got a new gateway dx4860-ub32p tower. The problem I am having is that when trying to use a second monitor for extended desktop the hdmi is not recognized. When I start the computer both monitors have the boot screen and starting windows screen. Past that only my monitor plugged in by vga cable is recognized. When I go to graphics options there is only one screen option shown. I am using windows seven the second monitor is a flat screen tv.
View 1 Replies
View Related
Sep 30, 2011
I have a gateway desktop with the windows 7 it is stuck on Saying setup is starting services, I do not have my origional windows 7 setup disk.What do I need to do to get my computer up and running again.
View 1 Replies
View Related
Dec 10, 2011
how i restore to factory settings on windows 7 desktop
View 2 Replies
View Related
Feb 17, 2011
I know that windows xp gives better performance in gaming but i really like windows 7 for its media center and for all the eye candy stuff.Act im not sure if my specs are good enough for comfortable gaming in windows 7 since it needs more specs than xp. My specs are: Processor:32bit Intel Core 2 Duo 2.93ghz Motherboard:Intel DG41RQ series Ram:4gb(2gbX2) ddr 2 GPU:NVIDIA Geforce 9500GT. So is it enough for gaming in windows 7. or i should go for xp. I play games like Mass effect,Assassins creed etc...
View 2 Replies
View Related