Recovery To Factory Specs / Windows 7 Will Now Not Boot?

Dec 9, 2011

My daughters ASUS K52F needed to be rebuilt to factoy specs. (I have done this before on an ACER and a GATEWAY without issues.)I started the restore and loaded each of the 4 disks when requested and it made it to 100% and I pressed on finish when requested and the computer restarted itself but then did not do anything but load the black screen with the ASUS logo.I must have missed a step but I do not know what that is.Has anyone else had this issue or know what I need to do now to get windows to boot/load?

View 4 Replies


ADVERTISEMENT

Restore Gateway To Factory Specs

Nov 4, 2012

I have a Gateway Windows 7 desktop that is having sporatic blue screen of death during bootup. The diagnostic tools do not work. When i used the Gateway recovery management, I got the menu, but it wouldn't let me; it says that the hard drive is not in the factory default.

View 4 Replies View Related

Restoring Gateway Desktop To Factory Specs

Nov 4, 2012

My computer has had sporatic blue screens at the end of windows 7 bootup. The diagnostic tools will not run. Gateway recovery management will run, but when I select the option for a restoration, it says my hard drive is not in the factory default. I'd like to just restore the computer- how to reset the hard drive factory default or to get around this error?

View 6 Replies View Related

Dell Inspiron 1545 Continuously Boot Loops After Factory Recovery?

Dec 3, 2011

She asked me to restore her computer to factory settings. She is not at all tech savvy, so I know for a fact she did not do anything to mess it up. It was running fine, but she just wanted to clean it out and bring it back to like new. She pretty much only uses her computer for school papers and email. I have done factory recovery on many computers at this point and I have never had any problems at all until now.

First thing I did was hook up my external hard drive and saved all of her documents and pictures. I then restarted the computer and pressed F8 and then clicked on repair my computer. It took me to datasafe backup and restore. I went as far as to restore the factory image. I chose not to save any files and to restore it to new again. It completed as normal and I clicked restart.When it restarts, a list of files pops up and then it says "Setup is preparing your computer for first use." It also shows another list of files that seem to be loading as well as it tells me that it is booting in safemode. Next thing it says is that "Setup will continue after restarting your computer". It then continues to restart and perform this boot loop until I turn it off.

I tried to repair the computer and it would fail saying it was offline. So, I plugged the hard drive into an adapter to hook it to my other computer. I opened the disk manager. I saw that the recovery partition was not active like it is on my other hard drives. I also see that for some reason it has a tiny partition that is labeled fat. On my other hard drives it is labeled oem partition. Not sure if this makes a difference or not, but thought it was worth mentioning. Also, when I choose to explore the recovery partition, it says the recovery folder is empty, however the properties say it is nearly full with many files. On my other hard drives I can not access that folder at all. I also am not sure if this matters or not, but didn't want to let anything I am doing go unnoticed.

View 4 Replies View Related

Installing Windows 7 After Factory Recovery Option

Nov 14, 2011

I've just used the windows 7 utility on my hp station pc which is called "restore to factory" and this seems like went smoothly, but when I try to reboot the pc, and after the "preparing pc for first use" there's a text box popping up witch says "could not complete installation of windows, to install windows on this computer, restart the installation" and then the system reboots again, and it all starts over. I dont know how to restart the installation, and I don't have any cd/dvd or usb, tried to download the windows 7 usb/dvd download tool, but as a first step it is requested a .iso file which I don't have, and don't know where to find..

View 9 Replies View Related

Recovering Windows 7 To Factory Settings Without Recovery Disk?

Mar 8, 2012

I am trying to recover my ASUS K52D Notebook PC to factory settings. I am currently running Windows 7 operating system. I do have the Driver & Utility Ver.1.0 disk, but I have lost the System recovery disk that was made by the store where I purchased my laptop from. I have tried recurring it using the partition file thing that's on my computer, but I received an error message. I am wondering, is there a way to recover my Notebook to factory settings without using the partition or the recovery DVD?

View 1 Replies View Related

Cannot Use Recovery Partition For Factory Settings

Mar 25, 2011

I thought I had a virus on my Pc, so I wanted to return back to factory settings. I put my recovery disk in the Pc and followed the prompts. When the Pc restarted, It had the error message--BOOTMGR MISSING. I did the above operation several times and still received the same error message. The odd thing is I can view the recovery partition in the MY COMPUTER folder. How do I get the recovery partition to work again. I have restored the OS with the disk Dell gave me, but I would like to use the option to recovery the factory setting.

View 5 Replies View Related

Way To Factory Restore An Acer Without Using Recovery?

Sep 7, 2011

everytime i try to factory reset my pc with erecovery managment, it never finishes once it gets to the end, it will say installing sysprep - factory mode, 52/52 and never finishes after that. is there any third party software that can factory restore my system? i noticed windows boots just fine even tho i didn't finish the whole software installation process.

View 4 Replies View Related

Recovery Computer Back To Factory?

Jun 18, 2012

i need a recovery disk to recover my computer back to factoryit is a toshiba

View 1 Replies View Related

Recovery Of Laptop To Its Factory Setting?

Feb 17, 2013

i want to recover my laptop to its factory setting but i lost all recovery data from my laptop?

View 2 Replies View Related

Factory Image Recovery - Screen Freeze?

Apr 9, 2011

my laptop (Compaq Presario CQ61) contracted a virus that did some heavy damage. So I go into the boot up menu and decide to restore the laptop back to the factory settings, just to be on the safe side so I can start afresh.Now it's on a screen that says 'Factory image recovery preperation' and it's currently copying files to restore the hard drive, but it's froze on 58%.

Last night I did the same thing and left it overnight while I went to bed, and when I woke up this morning it was still froze on 1%.

Edit: The loading bar is still there, but the place where '58%' was has gone. My mouse is moving but very slowly.

Edit: My laptop is very warm and I can't feel or hear the fan... it's going to overheat. I've had to turn it off.

View 7 Replies View Related

Acer E Recovery Complete Factory Restore

Apr 13, 2011

when i press alt+F10 to go to the acer eRecovery management program to do so, i cannot select any options except for the exit option ,One option says "Completely restore system to factory defaults and the other says "Restore Operating system and retain user data".

View 4 Replies View Related

HP Factory Restore - F11 Recovery Manager Not Working

Jan 17, 2012

1. I have no OS installed, but BIOS shows that there is a WIN 7 OS, which I know isn't there.
2. I have four partitions; C,D,E,F.
3. The C: is the HP_RECOVERY partition.
4. The C:HP_RECOVERY partition is set to ACTIVE.
5. I have rebuilt the BCD from scratch.
6. There is a BOOT (X partition which shows on the CMD. Someone said its the RAM virtual partition.
7. Upon booting the system gives WINDOWSsystem32winload.exe error.
8. The f11 or recovery manager ain't working.

What I Want
1. I want to do a factory restore.

View 2 Replies View Related

Factory Recovery (F11) Not Working In HP Envy 4-1025 TX?

Oct 5, 2012

I recently purchased HP Envy 4-1025 TX which came preinstalled with Windows Home Basic X64bit. Since it was having a single partition of 500 GB, i decided to do partition and for that i used bootable USB Drive to make 2 partitions, one of 50 GB and other of remaining space. After partitioning i abort the process in middle and then pressed F11 for system recovery but that didn't worked and finally i used that bootable USB Drive only to clean install Windows Home Basic. My problem is that i want to restore system to factory image using recovery partition since activation would be a issue. Now i tried many steps to use recovery partition like I made recovery partition as active and then boot but it is not working and rather windows opens up. I also did try to change letter of recovery partition to D: but that also didn't help. I also tried HP UEFI Update but that is also not working and giving error that your drive already has 4 partitions. The remaining disk space of about 395 GB is also unallocated, i can't allocate it since when i try to allocate it, it gives error that there is no space for new partition as MBR is full.

View 1 Replies View Related

Startup Repair Loop--after Recovery To Factory Defaults?

Oct 13, 2011

EDIT: This is added by moderator. The problem system has been "restored" to factory defaults, so you can skip to post # 11 and be missing only some history. I have also at this time moved the thread from Networking to Windows 7.Okay, this is my boyfriend's laptop. He's left it with me to see if I can fix it. I'm at work right now, and it is at home, so I can't try anything until I get home tonight.Here'e the situation, as best I can tell:He has 2 laptops...one is old, and connects fine, the other is probably 6 months old - a Dell - Windows 7, and this is the one that is having problems. The other laptop has no problem with its connection - it is just the Dell laptop. He brought it over to my house last night, and it is doing the same thing. It finds and connects to my network, but it states that it is a "limited access" connection, which essentially means you have no internet connection (apparently).

So here is what I have found out. For one, his laptop came with few months subscription to McAfee...and apparently that is now expired. He's never renewed it. I did put MalwareBytes on there for him, when he got the thing, but I don't think he runs it unless he thinks there is a problem. I've told him to keep it updated, but I guess he thinks I can fix it if there is a problem. Again... (Once we get this fixed, he WILL keep this stuff current..darn it.) Anyway...he said he kept getting some popups - the ones that ask if you want to "allow a program to make a change to your computer"...and he always said no. I think he got several of those in one night. He ran the MalwareBytes, and it found and quarantined some malware (I don't know what sort of things - I was not there when he ran it) and then when he tried to access his network again, he got the "limited access" thing. So...something has happened, just on that laptop. I messed around with it a little last night, but I couldn't get anything working.

View 14 Replies View Related

Replacing Hard Drive - Factory Image Recovery?

Dec 10, 2011

I have a Gateway computer that came preloaded with Windows 7.

I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?

View 14 Replies View Related

Restore To Factory Default Recovery Crashes Before Completing?

Dec 23, 2011

I have an HP dx7 laptop, which was experiencing repeated blue screens with many different error codes as well as periodically restarting seemingly at random. Occasionally it would also have the screen go black (looked like it entered sleep mode), which was unrecoverable.I tried to track down the various drivers and problems suggested by the error codes in the BSOD, but didn't have any success in preventing the blue screens/restarts. Eventually I decided to take the system recovery DVD's from HP, and reformat and reset to factory defaults. I figured at factory default settings if the system was still unstable, it'd point towards a hardware problem as opposed to drivers or other software.While performing the system recovery, it proceeds all the way to where it says "Setup is preparing your computer for first use" and gets to the step of installing drivers, at which point the system restarts. After booting up it then tells me that the installation has failed, and to reinstall. I've done this 3 times now, and get the same issue each time. I cant provide logs or dump files of the blue screens or other errors, since the HDD has been formatted as part of the system recovery.

View 9 Replies View Related

Unable To Load The Factory Setting From The Recovery Disks?

Apr 10, 2012

i am using acer 5745g, when i tried to use the recovery disks created earlier, it is unable to load even i tried everything from the boot menu..

View 1 Replies View Related

Are Specs Enough For Gaming In Windows 7

Feb 17, 2011

I know that windows xp gives better performance in gaming but i really like windows 7 for its media center and for all the eye candy stuff.Act im not sure if my specs are good enough for comfortable gaming in windows 7 since it needs more specs than xp. My specs are: Processor:32bit Intel Core 2 Duo 2.93ghz Motherboard:Intel DG41RQ series Ram:4gb(2gbX2) ddr 2 GPU:NVIDIA Geforce 9500GT. So is it enough for gaming in windows 7. or i should go for xp. I play games like Mass effect,Assassins creed etc...

View 2 Replies View Related

Recovery Partition - Restore To Factory Settings To Speed Up Performance

Apr 15, 2011

I would like to reformat my computer to speed it up again. Does reformatting slow down a computer after already being done? I want to keep some of my files, but I will not be using the windows reformat, I plan to use the "restore to factory settings" option. How would I do this? I have a "recovery" drive and I was wondering if I could store the files I want to keep onto that and when I reformat I could just transfer them over. How should I go about reformatting? I know there is a windows option for "restoring to factory settings." And I know that the last time I reformatted I used an hp tool to restore to factory settings.

View 7 Replies View Related

Deleting Program Files (x86) To Install Recovery-DVD To Factory Setting?

Nov 4, 2012

I was trying to restore the computer the FIRST TIME I got it, but I've found out that the Recovery copy won't make any changes because I have two(2) Program Files for Internet Explorer, one is for 64bit OS, and the other is 32bit (x86).I've tried to enter in the command prompt: takeown /f "C:Program Files (x86)" /r /d n and it displays ERROR: The current logged on user does not have ownership privileges on the file (or folder) "C:Program Files (x86)". But I am the administrator and the owner of this Hitachi Laptop Windows 7 Home Premium, 64-bit OS.I could not play any movies via internet, and I don't know what plug-ins are missing, so I want to restore the computer to its Factory setting.

View 6 Replies View Related

Factory Image Recovery With System Backup Discs Freeze At Disc?

Sep 12, 2011

I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.

View 9 Replies View Related

Minimum Specs For Windows Server 2003?

Sep 1, 2011

tell me the recommended or minimum specs for Windows Server 2003? This is for a Virtual PC by the way

View 2 Replies View Related

Disc ASUS Recovery Error 1029, Cannot Boot Into That Recovery Partition

Jun 23, 2012

I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.

View 4 Replies View Related

Where To Find Computer Specs

Mar 2, 2012

Afer looking at System Information, Device Manager, reading my invoice and User's manual I still don't know some things about my notebook. Where should I look to find out about: CPU Cooling, Idel temp, and Load tempSystem memory clockingPower Supply?

View 9 Replies View Related

V2 Premier Computer Specs

Apr 1, 2012

i'm looking for a recovery disk for my old computer. It's a v2 premier laptop with window xp model : #6365.

View 3 Replies View Related

Windows 7 - Factory Reinstall Completed-still Unable To Boot?

Aug 1, 2011

Upon turning on the computer, the recovery console loads - because windows will not boot.

Performed system dianogtic check - everything looks good.
Performed a system recovery successful but computer will not boot.
Performed a reset to factory settings successfully, but computer will not boot.
performed a command prompt reset - as was listed in another topic.

[code].....

View 14 Replies View Related

Windows 7 Boot Error - Image Factory Restore

Sep 5, 2012

I have an HP Pavilion laptop and used recovery manager to do an image factory restore. Upon reboot it brings up the following message:

Please wait:
updrvltr:unknown
x:windowssystem32

It wants me to enter something at the command prompt. What I need to do?

View 29 Replies View Related

Windows 7 Boot In Boot Recovery Mode?

Nov 2, 2012

Every time I boot my computer, it come up loading files, the open the boot recovery mode. If I leave it, it says that it fix one error, then it restarts and does the same again. The error was that it the boot.ini was missing. So I booted it up with ubuntu, and created an empty boot.ini file, then booted the minitool partition wizard (Partition Wizard Bootable CD allows user to manage partition directly with partition manager bootable CD.) and configured the boot.ini. But still no luck. It's booting into recovery mode because that is the first partition.

View 1 Replies View Related

Acer Factory Recovery Disc Won't Work On Acer Aspire 5532

May 5, 2011

When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.

View 3 Replies View Related

Acer Factory Recovery Disc Won't Work On Acer Aspire 7740

Jul 23, 2012

When I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved