Recovery Using Disk Image - Only Windows 7 Volume Restored

Sep 8, 2011

I periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.

View 7 Replies


ADVERTISEMENT

System Image Recovery Disk On New SSD?

May 9, 2012

I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.

View 2 Replies View Related

Recovery Disk Cannot See Image On Network Drive

Dec 19, 2012

my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.

Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..

I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.

View 9 Replies View Related

System Image File Error - No Disk For Recovery Can Be Found

Nov 24, 2012

I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".

So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?

View 8 Replies View Related

[CRASH] Windows 7 No Longer Boots After Restored From Clonezilla Image?

Aug 30, 2011

After restoring an image made with Clonezilla that used to work, Windows 7 is unable to start. When prompted, I used the DVD, but it still fails with "Startup Repair could not detect a problem".When rebooting, it says "Windows Error Recovery: Launch Startup Repair (recommended) and Start Windows Normally": Launch Startup Repair fails with "Windows Boot Manager: 0xc000000e The Boot selection failed because a required device is inaccessible".FWIW, to investigate, I deleted both partitions (#1 to hold the OS, #2 to hold images) and re-created them with enough space to hold (#1 was made a bit bigger because I didn't know how to specify infos in cfdisk accurately), and Clonezilla happily restored the image.

View 6 Replies View Related

Restored Windows 7 HP 64bit System Image - Won't Boot In AHCI Mode

Jun 29, 2011

I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?

View 5 Replies View Related

[INSTALL] Booting From Restored System Image Fails?

Jan 22, 2011

My Win7 HP x64 PC has two hard drives, each partitioned into two volumes:

My C: and E: drives are each half of a 200GB drive, both NTFS.
My D: and F: drives are each half of a newer, 1TB drive, both NTFS.
My F: drive has around 400GB of 'stuff' that I want to preserve.

I've been trying to migrate the win7 installation from C: to the first partition of the 1TB drive with two different tools (Norton Ghost and the built-in Windows backup utility) and both fail identically.The backup procedure itself appears to work in both cases.Restoring the backup to the first partition of the 1TB drive "works" in so much as I don't get any errors either way.Creating the requisite boot structures also work, as the O/S appears to be bootable.However, when the restored O/S makes it to the login screen, two flaws are evident:

1. The keyboard absolutely does not work.

2. If I log in on an account that doesn't need a keyboard (no password), I see "Loading desktop", then a few seconds "Logging out" and I'm back at the login screen.

If I look at the event viewer logs (booting up with the O/S on the smaller drive), I see numerous events like this:"The AVGIDSAgent service failed to start due to the following error: The system cannot find the file specified.""The Windows Live ID Sign-in Assistant service failed to start due to the following error: The system cannot find the file specified."

[code]....

View 1 Replies View Related

Installed A New Hard Drive But Can't Get System Image Restored?

Nov 10, 2011

I just installed a new hard drive after my previous one failed to start up. I have a backup image stored on an external WD Passport. The install went well. I turn on my tower with the Windows 7 recovery disc in, start up System Image Restore and plug in my Passport. The system restore recognizes my Passport and when I go through the wizard to reformat and partition the disk to match the layout of the recovery image, I get an error message saying "The system image restore failed. No disk that can be used for recovering the system disk can be found. *hyperlink* Details."Details states, "No disck that can be used for recovering the system disk can be found. Try the following: 1) A probable system disk may have been excluded by mistake. a. Review the list of disks that you have excluded from the recovery for a likely disk. b. Type LIST DISK command in the DISKPART command interpreter. The probable system disk is usually the first disk listed. c. If possible,, remove the disk from the exclusion list and then retry the recovery.Tried that, my disk is not listed as an exclusion.2) A USB disk may have been assigned as a system disk. a. Detach all USB disks from the computer. b. Reboot into Windows Recovery Environment then reattach USB disks and retry the recovery.

View 1 Replies View Related

Windows 7 Will Not Boot - Backup Failed To Read From Recovery Volume

Sep 14, 2012

So it all started last night. My computer was unresponsive, and after clicking "shut down" a few times to no avail, I decided to do a hard reset. I didn't think anything would happen, but afterwards it just wouldn't boot back up. It goes to the windows logo and stays there. I don't get any errors, it just hangs there. I have tried many things, so far nothing has worked.

I have tried booting into safe mode. This does not work, it gets stuck at classpnp.sys and stays there. I have tried booting from the windows 7 disc. This does not work, after it loads the disc it will hang at a black screen. I have tried switching from IDE to AHCI. This has worked, but not fixed the problem. When booting into safe mode it will crash instead of hanging.

When booting from the windows 7 disc I can almost reinstall windows, however I get the error "Windows could not format a partition on disk 1. The error occurred while preparing the partition selected for installation. Error code 0x80070057." When attempting to restore windows to a restore point I get the error "The system image restore failed. Error details: Windows backup failed to read from the recovery volume. (0x8078002F)"

I have tried connecting the SSD to a different windows 7 computer in a attempt to reformat it, however just plugging it in would give the same problem to that computer. So, is my SSD toast? Did I mess it up beyond repair? Now system repair will not hang on IDE, but still gives me the same errors. Also, now it says missing operating system. Not sure how that happened.

View 6 Replies View Related

Windows 7 Re-install From Recovery Image?

Apr 18, 2012

I have a Toshiba Satellite with a badly damaged windows installation. I want to do a complete re-install but cant start the recovery image from the Windows 7 repair my computer option. I can however access the recovery image from the partition and have copied it to an external USB hard drive. Can anyone tell me how I can start the re-install from the recovery image now on the USB external HD. Can I somehow create some re-install DVDs from this recovery image?

View 4 Replies View Related

How To Do System Image Recovery In Windows 7

Feb 22, 2013

I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.

View 4 Replies View Related

Make Windows 7 Recovery Image From Xp?

Oct 15, 2011

I use a dual boot system win 7 ultimate and xp sp3.now win 7 does not boot but can log on to xp. I did not create a system recovery image of win 7 and turned off system restore. Ihave no installation disk. So my only option is to create a system recovery image from xp.

View 4 Replies View Related

Windows 7 Not Starting After System Image Recovery?

Jan 4, 2013

Replaced my HD and used my Win Image BU, but Win will not start. I get the Dell screen that says Windows is loading, but then it is a blank screen.I did a second restore with same outcome. I followed System Image Recovery exactly, but cannot get that last screen to restore files I have booted from USB and from the boot disc - same results.

View 1 Replies View Related

Windows Cannot Format System Volume On Disk

Jan 21, 2012

i recently bought a new hard drive to put my os on, and i stupidly changed my old hard drive type from basic to dymainic, and its not letting me reformat it or convert it back to basic. When i try it says "Windows cannot format the system volume on this disk."

View 4 Replies View Related

Disk Volume Error In Windows 7 Ultimate?

Apr 27, 2011

My computer shows Disk Volume Error every time I run system maintenance. I tried Chkdsk, disk cleanup and disk fragmentation, but it did not work. Also, my Local disk C is reporting only 8 GB of free memory. But in realty it has 17 GB free memory. Even I could not extend my disk volume through Disk Management.

View 2 Replies View Related

Disk Volume Errors Detected Windows 7?

Oct 19, 2012

i keep geting this poping up on scan my speed is dead shoud be at 16Mbs , its at 157kbs it slowing every thing i think . i have a new modem router a netcom nb604n

View 3 Replies View Related

Hp Recovery Usb Give Error Unmountable Boot Volume?

Nov 28, 2012

i am using factory installed Windows 7 over hp laptop its working perfectly even recovery from f11 and hp recovery manager system recovery option also working means easily to restore i was create recovery usb from recovery manager when i try to boot usb for recovery after loading start error show Unmountable Boot Volume blue screen appears

View 1 Replies View Related

Shrink Volume Support In Windows 7 Disk Management?

Aug 14, 2012

Windows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.

View 2 Replies View Related

Uncountable Boot Volume, No Safe Mode, No Recovery Console?

Jan 22, 2012

I have a 2 year old vaio that has i5 and 8 gb of ram. I have windows 7 professional x64. My computer froze while on the Internet, and when I manually shut it down and restarted it, it gave me two options. Start repair console, and start normally. When I started it normally, it froze on the windows logo. I restarted it, and tried recovery console, but it loads, then gives me an arrow with a background of blue and a bird on the right, which is windows 7's background when logging in. But it only shows this.I have tried safe mode, but that freezes on classpnp.sys and I have tried to boot from windows 7 recovery disk. I have also tried windows vista recovery disk. When the windows 7 disk booted, it loads and then asks for my country, but then again shows just a cursor.Blue screen of death error is unmountable boot volume.

View 4 Replies View Related

Disk Read Error And Recovery Disk Not Working?

Mar 14, 2012

i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?

View 6 Replies View Related

System Image Recovery

Apr 16, 2009

How to Do a System Image Recovery in Windows 7 ?

View 0 Replies View Related

Way To Take A Disk Image Within Windows 7?

Oct 2, 2011

Is there any way to take a disk image within Windows 7 or do I need to buy disk imaging software like Acronis?

View 9 Replies View Related

Restoring From Recovery Image File

Oct 22, 2012

I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.

I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.

Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.

The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.

Do I need to be on Windows 7 x64 to use my restore image?

View 3 Replies View Related

Windows Disk Image Uesless

Jul 7, 2012

I had mt boot drive fail and replaced it with a drive of the same size, tried to use the disk image I created 2 months ago to recover my boot drive with and all I get is an error telling me there are no drives that it can use (not the exact msg.) to restore to. so it seems to be a useless feature if it won't work.

View 3 Replies View Related

Windows 7 Disk Image And Back Up

Jan 2, 2013

Is the back up and system image programs on Windows 7 good and trustworthy?

View 1 Replies View Related

Stuck On Starting Windows - Repair Shows System Volume On Disk Corrupted

Oct 19, 2011

I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.

Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033

View 1 Replies View Related

Factory Image Recovery - Screen Freeze?

Apr 9, 2011

my laptop (Compaq Presario CQ61) contracted a virus that did some heavy damage. So I go into the boot up menu and decide to restore the laptop back to the factory settings, just to be on the safe side so I can start afresh.Now it's on a screen that says 'Factory image recovery preperation' and it's currently copying files to restore the hard drive, but it's froze on 58%.

Last night I did the same thing and left it overnight while I went to bed, and when I woke up this morning it was still froze on 1%.

Edit: The loading bar is still there, but the place where '58%' was has gone. My mouse is moving but very slowly.

Edit: My laptop is very warm and I can't feel or hear the fan... it's going to overheat. I've had to turn it off.

View 7 Replies View Related

Attempted Minimized Image Recovery Failed

Sep 4, 2012

In preparation for sending my laptop to HP for a hinge replacement, I decided to backup all my data (via System Image). My plan was to then perform a Minimized Image Recovery: so as to wipe off all my data, but still keep the computer running nicely.The attempt to wipe my data failed.Whenever I try to boot my computer now, I am presented with "Windows Boot Manager" [see attached image]I don't have an OS disk.

View 2 Replies View Related

Out Of Disk Space - Volume D:?

Mar 9, 2011

I tried to install a .exe file (in order to support ArchiCad 12) onto my laptop (Gateway NV79). I get a message saying "Out of Disk Space -Volue 'D:'". It should be installing onto the C: drive. My D: drive is my cd/dvd drive.

View 1 Replies View Related

Replacing Hard Drive - Factory Image Recovery?

Dec 10, 2011

I have a Gateway computer that came preloaded with Windows 7.

I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?

View 14 Replies View Related

Dual Boot Hard Drive And Image Recovery?

Jan 11, 2013

I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved