System Image File Error - No Disk For Recovery Can Be Found
Nov 24, 2012
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
View 8 Replies
ADVERTISEMENT
May 9, 2012
I recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies
View Related
Nov 19, 2011
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
View 1 Replies
View Related
Feb 19, 2010
the tip to run SFC -- I'm not sure where the 'command prompt' is now in Windows 7.
What I did was search for sfc, right click, then run as administrator.
It appears something is running, but no window opened to ask or tell me anything. I checked Task Mgr and Resource Monitor and can't find anything resembling SFC, but there is activity even tho' I'm not doing anything else. The hard drive light is also flickering about once per second. What should I expect? Do I just wait patiently? How can I confirm SFC is running and fixing any errors?
View 3 Replies
View Related
Oct 15, 2011
I have a system image that was saved to a maxtor one touch ext HD via USB. This was created using Windows 7 image making system. I am trying to copy the image to my new HDD (internal) 1TB. The problem is when I go to recovery>advanced options>restore from image and reboot, the PC cannot find the image. I can click advanced options and search for a driver and actually see the drive and the image folder/zips but Windows 7 cannot detect it. I have also copied this image to a internall HDD because I thought it may be the USB. I have not changed any BIOS settings as I am using Windows 7 on the 1TB HDD and trying to restore to that from either the Dnetouch or the F:internal HDD. Neither times will it find the image.uestions. Do I need to use an alternate program like paragon or clonezilla2. When the image is saved, it is the name of my pc. Example: Fesktop64-PC. Does it need to be in a folder or the image be a specific name? Ive seen WindowsImageBackup as a possiblity.
View 6 Replies
View Related
Dec 19, 2012
my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.
Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..
I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.
View 9 Replies
View Related
Jan 15, 2013
So way back when I installed windows on my SSD I made a system image restore doohickey, using the "Create A System Image" tool, once I had applied all the necessary settings, installed drivers, etc. Now, windows is experiencing problems and I wish to restore to this back up. How on earth do I do this? The images don't have any kind of runnable-files inside to use. And when I use the recovery disk it says it cant find any image. Ive explored windows various restore utilities and the likes, and at no point does it simply say something like "Please select the file location of your restore image". I have the system image doohickey just sitting there...how do I tell windows to just use that backup? It all seems to be trying to do it in some automated fashion..
View 6 Replies
View Related
Oct 22, 2012
I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
View 3 Replies
View Related
Sep 8, 2011
I periodically create a disk image of a RAID 1 Volume consisting of two 500 GB SATA drive containing my Windows 7 system and data, and a RAID 0 Volume consisting of of three 320 GB SATA drives containing my Windows Vista. I tried to do a recovery from the disk image, but my VISTA volume does not restore. Is there anyway to restore both volumes? The recovery indicates the both volumes are to be restored, both only the Windows 7 volume is restored.
View 7 Replies
View Related
Sep 14, 2012
as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
View 1 Replies
View Related
Apr 16, 2009
How to Do a System Image Recovery in Windows 7 ?
View 0 Replies
View Related
Feb 22, 2013
I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
View 4 Replies
View Related
Jan 4, 2013
Replaced my HD and used my Win Image BU, but Win will not start. I get the Dell screen that says Windows is loading, but then it is a blank screen.I did a second restore with same outcome. I followed System Image Recovery exactly, but cannot get that last screen to restore files I have booted from USB and from the boot disc - same results.
View 1 Replies
View Related
Dec 1, 2012
I'm looking at a Toshiba Satellite L455D with Windows 7 home premium. It's has a hard drive about a year old, which I installed for the person at that time with a new copy of Windows. Now, it hangs at the 'starting windows screen.' Start up repair relays this message:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed error code = 0x490
I had tried booting with the dvd prior to seeing this. When it asked what os i wanted to boot, it did list the current os. The hard drive is listed correctly in the bios, so it is at least being recognized. Start up repair seems to be suggesting that the hard drive is wiped, or bad.
View 5 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
Sep 12, 2011
I am performing an image recovery. I have 4 DVDs that came with my laptop from geeksquad. They say HP System Backup. Everything runs smoothly in disc 1. When I get to disc 2 nothing happens at all. I do have an external hard drive. I was considering trying to copy the System back up discs from a different computer onto the external and then trying to do the system restore.
View 9 Replies
View Related
Mar 14, 2012
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
View 6 Replies
View Related
Dec 13, 2011
I periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
View 9 Replies
View Related
Dec 16, 2011
I have a file on my desktop that is called "Awesome." If I go to the properties, it says the file type is "File (.)" If I try to delete it it says "Could not find this item. It is no longer located in (my desktop directory) Verify the item's location and try again. I looked everywhere and searched this many times but nothing works for me. I think I was trying to save a picture as a jpg or something and somehow this happened.
View 2 Replies
View Related
Oct 16, 2011
when I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies
View Related
Jan 20, 2013
I have a hp dv 9700 laptop that has crash, I have being experiences a few problems recently and have manage to fix it my self when it crash before with system repair disk that I brought of the internet. The following message keep on coming up when booting A Disk Read Error Occurred. I think I might of mess the laptop up buy setting the setting as default throw bios, I am looking for free software that I can download on a disk or usb and then reformat it or try to repair it via a system repair disk, I am aware there are software that you have buy over the net, but I believe in doing the job yourself free.
View 2 Replies
View Related
Sep 14, 2009
How to Extract Windows 7 System Image Files Using Disk Management ?
View 0 Replies
View Related
Jun 17, 2012
Computer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
View 2 Replies
View Related
Feb 27, 2012
This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies
View Related
Feb 28, 2011
I've just used Windows Update to install SP1 on two more or less identical computers with Windows 7 Home Premium 64-bit. On one of the computers only the following error and warning are showing in the event viewer, from around the time the actual installation started (ie immediately after the download completed):Error - Source VSS, Event ID 12305 Task Category None:Volume Shadow Copy Service error: Volume/disk not connected or not found. Error context: DeviceIoControl(\?GLOBALROOTDeviceHarddiskVolumeShadowCopy18 - 000000000.....). Operation:Processing PostFinalCommitSnapshotsContext: Execution Context: System Provider________Warning - Source Ntfs Event ID 57 Task Category (2)The system failed to flush data to the transaction log.Corruption may occur.(end of messages)Both messages showed exactly the same time. System restore shows that a restore point was created at the same time, which suggests that it did manage to create a restore point despite the error.I tried restarting the computer, and it didn't try to run chkdsk (which I would expect it to do if there were any disk errors, and which has been mentioned on other forums). Disk management shows all disks and partitions to be healthy (before and after the restart).
View 4 Replies
View Related
Apr 21, 2012
the recovery folder was deleted from disk D from my system.what should i do now?will it creata a problem for my system?if it does what step should i take?
View 1 Replies
View Related
Nov 19, 2011
my 6 weeks old acer aspire laptop, win7 - 64bit, has started showing the message "fatal error no language file was found".i cannot get into I/E8 in either normal mode or safe mode. safe mode is good in all other aspects, normal mode is hopeless.the message appears in the middle of the page at the same time desktop opens.
View 9 Replies
View Related
Jul 23, 2012
I just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
View 9 Replies
View Related
Jan 24, 2012
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
View 2 Replies
View Related
Feb 17, 2013
The start up repair can't fix it and I noticed that in system recovery option, the operating system says" Windows 7 on (D Local Disk" does that mean the windows directory transferred to Local Disk D? And another thing is that I can't boot the pc in cd/dvd, when i click f8 and click the CD rom the message" press any key" won't show?
View 7 Replies
View Related
Apr 28, 2011
I'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.
View 1 Replies
View Related
