System Image Repair Disk - Min CD-R Capacity Mb?
Dec 13, 2011I periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
I periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
Created it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI recently reinstalled windows 7 and the programs that I like and created a system image which I burned to a blu-ray and also placed on an external HDD.I just purchased a 120 GB SSD to replace my 250 GB old-skool hard drive which contains my windows installation.Can I use the system image to reinstall windows to the new SSD or would it be better to do a fresh install? Does windows configure itself differently during setup on a SSD rather than a traditional HDD? If so, will that cause any problems by restoring the image onto the SSD?I only ask because using the system image to reinstall everything would go a lot faster than reinstalling windows + all the programs I included on the recovery image.
View 2 Replies View RelatedI did a search in the Windows 7 forum for system repair disc and got no hits so here I am asking.I have only Windows 7 32-bit installed here so I don't have a 64-bit system with which to create a system repair disk. I do have a Windows 7 Ultimate setup disk. How can I make a Windows 7 64-bit repair disk?
View 2 Replies View RelatedI'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
I am running Windows 7 RC on my Samsung NC10 netbook. I would like to create a system restore disk to allow me to restire system images, etc. However being a netbook the NC10 doesn't have a CD/DVD drive and while I can use an external one, it would be much easier to have the repair disk on a Flash Pen Drive.
Can anyone help me to create a repair disk on my pen drive?
I created a backup and image (Win 7 Pro) on an external (USB attached) HDD and then created a Windows 7 System Repair Disk. I then booted from the repair disk and the attached external drive is not visible.
The external drive is attached via through a hub, does it need to be attached directly? Is their a generic USB Mass Storage Device driver that I can load?
I was hoping that by creating the repair disk that all necessary drivers would have been loaded to the disk, but apparently not.
make a system repair disk for another computer
View 1 Replies View Relatedwhen I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies View RelatedI have a hp dv 9700 laptop that has crash, I have being experiences a few problems recently and have manage to fix it my self when it crash before with system repair disk that I brought of the internet. The following message keep on coming up when booting A Disk Read Error Occurred. I think I might of mess the laptop up buy setting the setting as default throw bios, I am looking for free software that I can download on a disk or usb and then reformat it or try to repair it via a system repair disk, I am aware there are software that you have buy over the net, but I believe in doing the job yourself free.
View 2 Replies View RelatedHow to Extract Windows 7 System Image Files Using Disk Management ?
View 0 Replies View RelatedComputer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
View 2 Replies View RelatedMy laptop is 6 months old - sony vaio. Do I require to create System Repair Disc? I have taken back up in external hard drive. Also have created windows 7 backup in three separate DVDs.
View 1 Replies View RelatedI have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies View Relatedgetting a USB mouse or keyboard to work while using a Windows 7 system repair disk. My USB mouse seems to mostly be the problem. The keyboard works most of the time, so why doesn't the USB mouse work
View 3 Replies View RelatedI cannot create my system repair disk. My computer cannot read the dvd after I created it. Can I create a bootable usb instead?
View 1 Replies View RelatedThis isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies View RelatedI have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
Running Windows 7 Home Premium 64 byte. Have a 1 tb external Seagate drive connected with USB 2. Disk capacity is showing 925GB. Have lost 75 GB. Is there a way to recover the the lost 75 GB?
View 1 Replies View RelatedMaximum capacity of hard disk
View 6 Replies View RelatedI made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
View 9 Replies View RelatedI'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
View 1 Replies View RelatedWhen i try to create a SP1 system repair disk, it shows me an error 0x80004005. What does this mean? Is there anyway i can download it?
View 3 Replies View RelatedI don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
tel the maximum hard disk capacity of Windows7
View 2 Replies View RelatedI bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.
View 2 Replies View RelatedI recently cloned my 500Gb HDD to a 750 Gb drive. When I nstalled the clone it shows a capacity of 443Gb in the computer view and 687Gb in the Data Mgt view. I'm aware of the reasons for the missing 63 Gb but What I'm confused about is the missing 240 Gb between the 2 views. The clone software mfg tells me the that the Data Mgt view is correct and the clone process was successful
View 3 Replies View RelatedI have had Win 7 installed for a while now).
Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64?
View 1 Replies View Related