My laptop is 6 months old - sony vaio. Do I require to create System Repair Disc? I have taken back up in external hard drive. Also have created windows 7 backup in three separate DVDs.
View 1 RepliesI have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
View 5 Replies View RelatedI installed win 7 Pro on a new build: Gigabyte GA-P55-UD7 + i7875 + 8Gb Crucial DDR3.Made system backup and created System Repair Disk. A few days later (and a few backups later as various software loads were made) the system crashed while I was attempting to email photos from Picasa via its link to Outlook 2007 Screen went blank and on restart neither normal nor repair start worked (latter recycled to POST continuously).So, got out the repair disk, made by this system earlier - and after keyboard choice it tells me that the "repair disc created by win 7 64 bit not compatible with this system".
View 8 Replies View RelatedI have a system image created in Vista with external, internal hard drive is done. i replaced internal and installed windows 7. Can i use any of the information from this system image backup? Is there anyway to read the drive and pick out some of the important files? i don't need the whole system restore but would like as much of the old info as possible.
View 1 Replies View RelatedCreated it with no problems, apparently at least. My BIOS is set to boot from CD drive, so why won't my machine boot from the system repair disk? There were no errors when disk was created. My machine just boots to windows.
Anyone else experience this with Win 7 Professional?
-Product: Sony VAIO factory install Win 7 (x64)
-Issue: windows failure / factory restore attempted and failed / Win will not load
-Other: purchased Win 7 repair disk via C.Net on my IPhone
-New issue: transfer said files using "Win system recovery options via USB
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedI did a search in the Windows 7 forum for system repair disc and got no hits so here I am asking.I have only Windows 7 32-bit installed here so I don't have a 64-bit system with which to create a system repair disk. I do have a Windows 7 Ultimate setup disk. How can I make a Windows 7 64-bit repair disk?
View 2 Replies View RelatedI periodically create a system image using an external hdd and a dvd.
I've run out of dvd's and have only got some cd-r's of 750Mb
I'm trying to created a posready 7 embedded image, and I want to be able to supply a system repair disc and system image with it, should the disk hardware fail for the end user.
The procedure seemed straightforward, and I'm running it straight after a fresh posready install to test it. I have 2 USB DVD drives attached, one to write the image to, and one because it needs the installation media as part of the creation process. from control panel, backup and restore, click Create a System Repair Disc Choose the dvd writer to use to create the disc and insert a blank disc, I choose E: in my case which has a blank DVD-R "Insert Windows Installation Disc", OK I put the Posready7 install DVD in the other DVD drive F: , click continue... System Repair Disc could not be created, The system could not find the path specified (0x8070003) I have tried inserting instead a Windows 7 Professional DVD at step 3, have tried with a single DVD writer, swapping discs, have tried on a couple of different posready7 installs, one with the 100MB system reserved partition and one without.
I've googled the error code and got lots of results suggesting corrupt user profiles etc, but these are new installs.
I am running Windows 7 RC on my Samsung NC10 netbook. I would like to create a system restore disk to allow me to restire system images, etc. However being a netbook the NC10 doesn't have a CD/DVD drive and while I can use an external one, it would be much easier to have the repair disk on a Flash Pen Drive.
Can anyone help me to create a repair disk on my pen drive?
I created a backup and image (Win 7 Pro) on an external (USB attached) HDD and then created a Windows 7 System Repair Disk. I then booted from the repair disk and the attached external drive is not visible.
The external drive is attached via through a hub, does it need to be attached directly? Is their a generic USB Mass Storage Device driver that I can load?
I was hoping that by creating the repair disk that all necessary drivers would have been loaded to the disk, but apparently not.
make a system repair disk for another computer
View 1 Replies View RelatedI have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies View Relatedgetting a USB mouse or keyboard to work while using a Windows 7 system repair disk. My USB mouse seems to mostly be the problem. The keyboard works most of the time, so why doesn't the USB mouse work
View 3 Replies View RelatedI cannot create my system repair disk. My computer cannot read the dvd after I created it. Can I create a bootable usb instead?
View 1 Replies View RelatedI made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
View 9 Replies View RelatedI'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
View 1 Replies View RelatedWhen i try to create a SP1 system repair disk, it shows me an error 0x80004005. What does this mean? Is there anyway i can download it?
View 3 Replies View Relatedwhen I have had the PC on to update or back it up it has rebooted itself. No one else uses this computer but me so I am unsure what is going on with it. Can someone give me some kind of idea where to stat on this problem?
View 10 Replies View RelatedI bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.
View 2 Replies View RelatedI have had Win 7 installed for a while now).
Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERSCLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05: AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.2.0.0.256.1
Locale Id: 1033
I have 2 laptops. One, a Sony Vaio has a working Windows 7 home premium OA 64 bit. And another Toshiba Satellite that HAD Windows 7 home premium OA 64 bit. The hard drive in the Toshiba went fubar and is unrecoverable. None of the sectors are readable except the partition table and SMART says that drive failure is imminent. I installed a new blank hard drive in the toshiba.Can I use my Vaio Windows 7 to get this Toshiba Windows 7 working somehow? I created a repair disc on my Vaio but I don't know what to do next for the Toshiba. No the Toshiba does not have any backup recovery disks made from it but I can make whatever discs with my Sony Vaio. I have not done system recovery on windows since the old NT days. It looks like MS made this harder than it was. All I had to do was use my install disc.
View 4 Replies View RelatedThis maching was turned off and unplugged while owner went on vacation.On return it just goes to the auto repair parocess every power up.Went to DOS prompt and the drive with windows on it was given the letter D, the system partition was given C.I tried bootrec /rebuildbcd and /fixboot to no avail. Then I assigned the windows partition to C and the system partition to D and tried again to no avail.I have removed this drive and scanned it on another PC as a secondary drive and found nothing other than cookies with Malwarebytes, SuperAntiSpyware as well as nortons. I also looked for rootkit with TDSSkiller. After renaming cbs.log I looked in D;windowslogscbs after doing a sfc /scannow process for the repair log and there was none created. I looked on the system boot drive "C" but of course there was no windows folder so I created a windows/logs/cbs folder to see it it might be created there, it wasn't.This appears to not be due to a bug but maybe a shutdown while it was in hibernation or something like that.
View 2 Replies View RelatedI have just created a batch file to backup a few things on my machine, the thing is the batch file has a menu in it and i was wondering if i was to set the batch file to run under task scheduler say once a week is there a way i can get it to excute through the menu of the batch file? if not when the task scheduler runs it, it will just stay a point waiting for me to press enter.
View 9 Replies View RelatedI have a 300GB hard drive that I am trying to attach. After attaching the VHD file and selecting the backup files on the hard drive the device apparently attaches but no drive is created with the next available drive letter so that I can explore the contents of the drive.
View 2 Replies View RelatedWith Windows 7 I can't seem to figure out how much disk space i will need or tailor the selection for backup, I am using a HP utility...
View 8 Replies View RelatedI've just recently realized that copying folders to a backup hard drive resets their "created" date. Should my computer ever crash, all my backup files will state to have just been created on that certain date. Me, being the organize-freak I am, have been looking for a solution so my backed up files can have the same time stamps as on my computer right now. I've done a little searching, and have found that people always recommend Robocopy. Problem is, I can't understand a word of the tutorials. How to run Robocopy to carry out what I want? And also just for the heck of it, is Robocopy the only solution? Is there some sort of back up program on Windows 7 that can do that?
View 3 Replies View RelatedCannot click box to create boot disk because it remains as a faded option
View 4 Replies View RelatedI have been trying to format a partition I created on my harddrive for my laptop. I booted from a disk into a program called GParted (live CD version). I used this to format the partition I created. Then, once I had finished attempting this task, my lack of expertise in computing took it's toll. I chose the option to create a disk label on the partition. I mistook this operation for something innocuous. It gave me a warning of some sort, which I ignored since I didn't think would be a problem since the recently formatted partition would be empty. This operation took a few seconds (30 or so) and once completed the drive map above said 685 GB unallocated space (or the size of my entire hard drive). I was very scared at this point so I restarted my comp and booted to hard drive and all I get is a blank screen and a mockingly blinking cursor. Now I am trying to see what my factory recovery disk can do for me. Using the windows recovery console I have attempted to repair this. Looking at the details, it runs a few tests. then sees that there is no valid partition, and tries to repair the partition. I restart and nothing has changed. Reattempting the repair just does the same thing and doesn't have any visible affect. Although it looked bad at this point there is some good news. In the recovery console I have attempted to load drivers from the other recovery disk. When the window opens to browse the disk I am able to navigate to the other drives (that I thought were gone) and it seems that all my system and personal files are still intact. I rebooted into GParted and it seems that the original hard drive is visible again and intact. However, I still can't boot!
I do have one option that is unnattractive to me. I have considered reinstalling windows to the partition I created, then once in the OS I could backup all my files to an external device, then redo everything from scratch. However, I am concerned that in the process of installing Windows 7 that I might everything for real. Maybe someone could affirm or repair my paranoia about this? However, I don't want to do this because I have been setting up this laptop for the last 2 weeks and I really don't want to spend the next 2 weeks doing it all over again (although it wouldn't be so bad if i could recover all my downloads and personal files).