Boot Disk Can Not Be Created
Jan 5, 2013Cannot click box to create boot disk because it remains as a faded option
View 4 Replies
ADVERTISEMENT
Run A Windows 7 Repair Disk That Was Created On A Different PC?
Dec 17, 2012I have an issue with my desktop PC. I believe I have a corrupted system file since the HDD is no longer bootable; however I have been able to remove the infected drive and install it as a slave on my HTPC. This has allowed me to backup all my important files.My question... I'd like to run a Repair on the existing Windows 7 install but I never created a rescue disk when the OS was operational. Can I create a repair disk using my Windows 7 OS off the HTPC and run it over my desktop PC? Or is the disk specific to the PC the OS belongs to.
View 5 Replies View RelatedCreated A Disk Label And Now Windows 7 Won't Start
Jun 28, 2011I have been trying to format a partition I created on my harddrive for my laptop. I booted from a disk into a program called GParted (live CD version). I used this to format the partition I created. Then, once I had finished attempting this task, my lack of expertise in computing took it's toll. I chose the option to create a disk label on the partition. I mistook this operation for something innocuous. It gave me a warning of some sort, which I ignored since I didn't think would be a problem since the recently formatted partition would be empty. This operation took a few seconds (30 or so) and once completed the drive map above said 685 GB unallocated space (or the size of my entire hard drive). I was very scared at this point so I restarted my comp and booted to hard drive and all I get is a blank screen and a mockingly blinking cursor. Now I am trying to see what my factory recovery disk can do for me. Using the windows recovery console I have attempted to repair this. Looking at the details, it runs a few tests. then sees that there is no valid partition, and tries to repair the partition. I restart and nothing has changed. Reattempting the repair just does the same thing and doesn't have any visible affect. Although it looked bad at this point there is some good news. In the recovery console I have attempted to load drivers from the other recovery disk. When the window opens to browse the disk I am able to navigate to the other drives (that I thought were gone) and it seems that all my system and personal files are still intact. I rebooted into GParted and it seems that the original hard drive is visible again and intact. However, I still can't boot!
I do have one option that is unnattractive to me. I have considered reinstalling windows to the partition I created, then once in the OS I could backup all my files to an external device, then redo everything from scratch. However, I am concerned that in the process of installing Windows 7 that I might everything for real. Maybe someone could affirm or repair my paranoia about this? However, I don't want to do this because I have been setting up this laptop for the last 2 weeks and I really don't want to spend the next 2 weeks doing it all over again (although it wouldn't be so bad if i could recover all my downloads and personal files).
Created Backup Now System Repair Disk Required Or Not
Jan 11, 2012My laptop is 6 months old - sony vaio. Do I require to create System Repair Disc? I have taken back up in external hard drive. Also have created windows 7 backup in three separate DVDs.
View 1 Replies View RelatedUninstall Virtual CD Drive Created By Magic-disk?
May 6, 2012I installed MagicDisk awhile back because I was trying to mount a copy of memtest. Anyways, I ended up uninstalling MagicDisk, but the virtual cd-rom drive it created stayed behind.However, every time my computer either boots or even wakes up from sleep mode, windows automatically reinstalls the drivers and re-enables the virtual cd-rom drive. where to find the registry files I have to delete to tell my windows installation that I don't want that drive anymore?
View 1 Replies View RelatedPartitioning - Created A Partition And Can't Boot
Oct 20, 2009I put a clean install of Win 7 onto my laptop and all was well. I went into disk management and shrunk my C: partition a bit to create a new partition.
Having done that, I now cannot boot up. It would seem that something I've done has caused the system reserved partition to become my C: drive and what was C: is now D:! Windows 7 attempts a repair when I boot up, but this fails due to a corrupt registry.
I've put the disk back in to see what that offers and it's here that I noticed that Windows is now on the D: drive. Opening a command prompt confirms how the drive letters have been reassigned.
I'm not 100% sure but assume that it's trying to boot from the system reserved partition and not liking it? I only just installed yesterday so don't mind doing a reinstall if that's the easiest fix, but just wonder if anyone knows what I can do to ensure this doesn't happen again? I presume my partitioning shenanigans are to blame somehow?
Restore Points Created Tend To Get Deleted When Boot Up?
Mar 25, 2012the restore points created tend to get delted when I boot up my laptop the next day.How do I ensure that my restire points remain. I checked my drive and it still says 7 GB free.
View 8 Replies View RelatedCreated New Partition And Made It Primary - NTLDR Missing On Boot Up
Aug 31, 2010I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.
View 4 Replies View RelatedCreated Boot Partition Manually / Service Pack Update Error 0x800F0A12
Jul 28, 2012I reinstalled Windows recently, but it used the same boot partition from my old installation. I got rid of the old partition (it was on the wrong hard drive) and created a new one with the repair disc. Windows boots, but won't install updates. Bcdedit outputs The boot configuration data store could not be opened. The system cannot find the file specified.
View 6 Replies View RelatedHard Disk Boot Failure Insert System Disk Press Enter
Mar 29, 2012im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View RelatedWindows 7 Disk Boot Failure Insert System Disk And Press Enter?
Jan 5, 2012windows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedDisk Boot Failure, Insert System Disk And Press Enter?
Aug 27, 2011I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedDisk Boot Failure, Insert System Disk And Press Enter
Oct 13, 2010I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedBOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER
Feb 17, 2010I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
Disk Boot Failure Insert System Disk And Press Enter
Jan 10, 2013My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedDisk Boot Failure, Insert System Disk
Sep 5, 2011When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies View RelatedInstall Windows 7 On An ISO Disk Via Disk Boot?
Dec 28, 2011So, I need to know if I can install windows 7 x64 via direct boot when I start up my computer it is in ISO format. So like my default boot will be my DVD drive to install it. can I do that with it being ISO format?
View 12 Replies View RelatedDisk Boot Failure Windows 7 No Disk
Mar 25, 2012I tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?
View 1 Replies View RelatedGet This Error."disk Boot Failure Insert System Disk And Press Enter"?
Nov 11, 2011I started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
"Disk Boot Failure Insert System Disk And And Press Enter"
Jan 24, 2012I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
View 4 Replies View RelatedWindows 7 Will Not Boot When The Boot Disk Is NOT In The CD Drive
Jul 24, 20102 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
Clone MBR Partitioned Boot Disk To GPT Partitioned Disk
Jul 4, 2012My current hard drive is dying, so claims Windows and Hitachi Drive Fitness Test. I bought a replacement drive 3TB drive which requires GPT partitioning. I have 64 bit windows and a UEFI motherboard, so I know I can use the drive as a boot drive for a brand new installation.
My question is how do I move the entire contents of my old drive to this new drive and keep it bootable?
I asked on other another site and they suggested I first let the Windows installation disk partition the drive GPT correctly for Windows, then copy the contents of the old drive to the new one. However, another person on that site said that that would break all the symlinks (didn't know symlinks played such a crucial role in the OS) and that I should use a cloning utility that knows how to copy NTFS. Was this person off base, or is it impossible to create a bootable copy of a Windows installation by just copying all the files (this would be from live linux of some type, not Windows itself)? If it is impossible, is there a utility that can copy the contents of a partition correctly, without needing to clone the entire partition table? Also, I have no room to make an image of my old drive anywhere.
Finally, does anyone know if clonezilla can copy an mbr partition to a gpt partition automatically, essentially doing exactly what I need, or will it always copy the partition scheme as well?
How To Boot From New Hard Disk
Aug 5, 2011I've just bought Seagate Momentus XT 500GB and installed it myself to desktop. Downloaded DiskWizard from Seagate to clone my old hard disk into the new one.
Problem: How do I boot from the new hard disk? I still got my old hard disk on my computer, I'm trying to use it as extra storage, but it's still booting from the old C drive. How do I change it to boot from my new hard disk?
Boot Disk Failure?
Jan 11, 2013Running Windows 7 Home Premium. For three days now I have seen nothing but the error Boot Disk Failure when trying to boot up.. I can overcome it by putting the IOS 7 disk in the DVD CD drive and let it boot so that I can then run the repair on the computer. I borrowed an OS 7 install disk and the same thing happens. After a series of checking the system I am informed that nothing wrong was found. If I leave the disk in the drive, even through rebooting, the machine runs just fine. If I take the disk out of the drive, I am dead in the water until I put it back in the drive, reboot and let the tests start over again and all is fine.
View 14 Replies View RelatedPC Will Not Boot From HDD Or Windows 7 Disk
May 1, 2012My father's PC is quite new, with Intel i5200 chip, 4Gb RAM and ASUS motherboard with onboard graphics. About a month ago he experienced random BSODs, he is not aware of any particular program causing them, and the dump files I have seen are all different.
BSODs increased in frequency, so I said I'd take a look at it, reinstall Windows, whatever. Anyway, it took me hours to back up his photos between crashes, and then I found I couldn't boot from HDD or WIn 7 DVD (full retail disk). I get to the Windows did not start successfully, run Repair screen, but it doesn't run it. Likewise from the DVD, it loads the initial files, then crashes to the Repair screen, only to not run it.
Likely culprits? HDD? RAM or PSU? It's in warranty, but I'd like a steer on possible causes before he sends it back, you can never know too much!
Making A Boot Disk
Jul 28, 2009I need to flash some roms on a graphics card and a disk controller card, but both require the use of a 'boot floppy' (i'm adding that in quotes as this is totally alien to me!
I suppose this means some sort of ancient dos thing!
I've really tried against all odds to eliminate floppy and serial / PS2 devices from my life, and now I've achieved this, and my loft is far too dusty to be crawling around in trying to find such things again!
Could I create this dinosaur relic on a USB stick, and if so, how does one go about it?
I tried making my usb stick bootable as I did in the wonderful thread on this forum to install RC1 and it worked a dream, but i'm guessing this isn't the same thing is it .
Win 7 Disk Won't Boot Computer
Oct 9, 2009I have my serial number that I got from Microsoft a while back and I burned the iso to a bootable dvd however when I try to boot with the burned disk, all that happens is I get a black screen with a flashing cursor at the top of the screen. I left the computer like this for aproximately 2 hours tonight and it never ended up booting up.
I've tried using imgburn as well as magiciso to burn the image to the disk and both of them have made coasters of several dvd disks now.
From what I remember when I first installed Win 7, I was atleast able to double click on the setup.exe program and it would bring up a windows 7 window in vista that was like an installer. However when I try that now, I just get a message telling me that autorun.dll is either not made for this version of windows or it is corrupt. I can't imagine the iso file becoming corrupt from simply sitting on a drive that I rarely use between the last time that I burned the iso image to a dvd and installed Win 7 and now.
Perhaps this is a common issue that somebody here knows how to deal with. Apparently MS isn't allowing any more downloads of the iso so I'm pretty much stuck with the iso that I have an hoping that it's not really corrupt.
Can't Boot From Any Disk Or Menu
Aug 30, 2012I have an eMachines E528 with an Intel Celeron 900 processor. I got the blue screen of death and was able to use the Windows system repair disk to reinstall windows 7. However, while trying to "update" Windows 7 with the SP1 update through the windows update tool, I got the blue screen of death again. This time I cannot boot the computer. I've tried a recovery disk, a system repair disk, a new clean copy of windows 7, and a Partition Wizard bootable CD. Everytime it gets to the point of loading ANY menu, it freezes up and does nothing for hours. I have spent so much time researching and trying things from other forums, and I have gotten nowhere. get a fresh copy of windows on this computer? or get me into the menu that allows me to restore from a system repair disk? I have even tried an "eRecovery" without even going into Windows by pressing ALT F10 at the logo screen as the computer is booting up, and I still get hung up while the application is trying to load the menu options.
View 2 Replies View RelatedCreate A Boot Disk?
Dec 14, 2010I tryed to create a D: since there eas only a C:. After creating 2 partition a was going to merge these to but the result was after that I lost my C: "No bootable device". how to burn a botable f-disk, in swedish if possible.
View 6 Replies View RelatedPossible To Boot Windows 7 From A Ram Disk?
Mar 21, 2011i watched this video on Internet where this guy had windows loaded on a ddr2 or ddr3 ram disk (i guess you would call it that) and windows booted in less than 4 seconds and programs opened up instantly. i have not one clue how he did it but would this be possible to do and put all of your everyday programs on it? like your web browser, media center, and what ever else you use most often, and you put the rest of your programs on a ssd?
View 9 Replies View RelatedDisk Check At Boot
Sep 16, 2009How can I solve the disk check at boost? I have used seagatetool to check disk but the result is PASS, the hard drive had no problem. I have format the disk and reinstalled Windows 7 but disk check still run.
View 6 Replies View Related
