Windows 7 Will Not Boot When The Boot Disk Is NOT In The CD Drive
Jul 24, 2010
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
I am using an HP Pavillion DV9700 laptop BIOS F.2C AMD Turion 64x2 TL-60 2.00 GHz 2 GB on board Windows 7 Home Premium, 32-bit OS, all updates installed
Somewhere, after a Windows 7 update many months ago, the problem started. I had no problems before. It started with the OS not recognizing the optical disk drive that came installed with the laptop. The computer's set-up BIOS recognizes the drive as being there. The optical drive does not show in Device Manager. I tried changing out the disk drive, it did not work. Soon, Windows 7 would occasionally lock up at the boot screen, but work fine on a cold reboot following a lock-up.
But then the lock-ups became permanent and cyclical. No amount of reboots would facilitate. I went to do a clean install using an external USB optical drive and accidentally discovered it cured the problem! The laptop will not lock up if the external USB optical drive is hooked up and turned on when starting the computer. I tried a clean install of the operating system. I tried updating the drivers. Windows 7 always recognizes I had problems booting and sends the error messages to Microsoft.
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
basically a bad partition will not allow me to wipe the computer clean, boot XP from the drive or add/change bios screen...i don't have tje kind of cash to buy or pay for repairs. what can i do?
I had an issue where Windows 7 would not boot anymore, getting error, BOOTMGR missing, Press Alt-Ctrl-Del to restart. I have tried to repair with windows disk but still getting error. I have decided that I want to just do a reinstall but I want to get on and export my favorites and grab a couple other things. I used to have a CD that I could use to boot up with (Think it was called Barts Boot Disk, Been too long) to get into Windows XP and do a couple things. My question is, is what is the best boot disk that will allow me to copy files from the HD to my external drive before I refresh?
New to the Tech forum boards but I am having a problem with my HP Pavillion dv6t. The hard drive went bad so I installed a new Seagate 1TB internal hard drive in the notebook. Starts up fine and then it says that "No bootable device found"---insert disk press any key. The disc is in the cd rom, I went into the BIOS enabled the CD/ROM boot option. I also went into the Boot option menu and tried selecting the internal cd/dvd rom drive option and I went into the actual boot order screen and adjusted the boot order so it read the cd-rom drive first then the hard drive. I also am using the HP Application and Driver recovery DVD. I am not sure if the disc is bad or cd drive is bad. The other thought is that because it is a brand new hard drive there is no information on it for the drivers so maybe the computer is not processing the information.
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning. I would be most grateful for an answer explaning what and why or why not.
When there is a Restart required after a software upgrade, the BIOS on my system (Win 7/64) will go to an external HDD (I have three for storage and backup). If I force it off and go into the BIOS on startup, it will show any of the other three HDD's in the boot priority. I reset the priority to the correct drive, save and start (repeat this process several times) and finally it will start from the correct HDD. I thought it might be the CMOS battery but with a new battery in place I still ran into this. This system (HP desktop) is less than a year old.
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
So, I need to know if I can install windows 7 x64 via direct boot when I start up my computer it is in ISO format. So like my default boot will be my DVD drive to install it. can I do that with it being ISO format?
I tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?
ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
My father's PC is quite new, with Intel i5200 chip, 4Gb RAM and ASUS motherboard with onboard graphics. About a month ago he experienced random BSODs, he is not aware of any particular program causing them, and the dump files I have seen are all different.
BSODs increased in frequency, so I said I'd take a look at it, reinstall Windows, whatever. Anyway, it took me hours to back up his photos between crashes, and then I found I couldn't boot from HDD or WIn 7 DVD (full retail disk). I get to the Windows did not start successfully, run Repair screen, but it doesn't run it. Likewise from the DVD, it loads the initial files, then crashes to the Repair screen, only to not run it.
Likely culprits? HDD? RAM or PSU? It's in warranty, but I'd like a steer on possible causes before he sends it back, you can never know too much!
i watched this video on Internet where this guy had windows loaded on a ddr2 or ddr3 ram disk (i guess you would call it that) and windows booted in less than 4 seconds and programs opened up instantly. i have not one clue how he did it but would this be possible to do and put all of your everyday programs on it? like your web browser, media center, and what ever else you use most often, and you put the rest of your programs on a ssd?
I am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.Does anybody know a proper solution without having to disconnect and reconnect the hard disk/dvd drive as I think that this may not be a good idea?
I just got an SSD, and immediately installed W7 on it. Got it all updated, backed up my other drive, and formatted the old one so it wouldn't be a boot disk. However, now Windows won't automatically boot from the SSD. I can hit the boot menu at startup and select the drive manually, but it does not show up in the arrangeable list of drives to automatically boot from. How do I make Windows automatically boot from the SSD? Windows 7 is fully installed and updated on it; it works fine when I automatically select it, but Windows refuses to notice it unless I tell it that it is there.
how to make a win 7 boot disk then add programs that are avaiable on this site and run them off a dvd to try and bring a Dell laptop that i purchased last year. also if there are other scanning software that can be recommended would be useful. I have some computer background, but not advanced. One last item, is there such a scanning software that can detect injected services that are hooked in win 7 to slow down your laptop?
I notices some sound issues so I restarted. Then my computer froze seconds after windows had launched like on the web. After cleaning my fan and stuff it worked again I feel asleep watching something and awoke to a froZen black screen. I restarted and have been getting disk boot failure ever since.
I have heard that windows 7 will not boot from guid disks but I remembered that Mac's can dual boot windows using 'boot camp', but macs use the guid partition map not the mbr partition map.
I have a "DISK BOOT FAILURE" error during startup. I just installed Ultimate x64 and now this error appears. It was OK on Ultimate x86.
I detached all hard drives and USB devices except system disk and DVD ROM and still error appears. I booted from installation disk and ran repair and still error appears. I booted again from installation disk and ran next cmd:
The only way to run Windows 7 is to insert installation disk to DVD, wait until message "Press any key to run from cd or dvd", DO NOT press any key and wait. In a few seconds Windows 7 starts.
My friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
