I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
View 19 Replies
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies View RelatedI needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
View 5 Replies View RelatedWindows 7 my computer shows disks my two partitions device manager and disk management do not show my hard drive
View 3 Replies View RelatedThere was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
View 3 Replies View RelatedI'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies View RelatedIn my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
How to force format a flash drive? I have an 8gb flash drive and I plugged it in to a speaker that plays mp3 songs. But after unplugged it, my flash drive prompts "Please insert disk" and 0mb in my computer. I tried to view it with disk management and I saw its partition type was RAW.
View 6 Replies View RelatedI have an external HDD that works on any other machine I test it on, except mine. It was working and for some reason I recently needed to use it and it didn't work. It appears in device manager but not in disk management. A drive letter might not be assigned to it, I can't see it in disk management to assign a drive letter to it.
View 7 Replies View RelatedMy C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
View 9 Replies View RelatedI use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1.Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives D and E are connected to SATA port 2 and 3 but are listed before the one connected in SATA port 1. And since the computer seems to work fine, I'm wondering if the disk numbers listed in Disk Management matter at all?
View 9 Replies View Related2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
View 2 Replies View RelatedI want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
View 3 Replies View RelatedI've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
In the Disk Management, I have an extra 0 MB GPT Protective Partition. Is that normal?
View 4 Replies View RelatedMy data hard drive is seen in disk management but does not show in windows explorer.I am using windows seven 64 bits.In disk management the drive shows: Layout: simple, type: basic, file system: NTFS, status: healthy(system-active-primary partition) How can I retrieve my data?
View 8 Replies View RelatedI have a Dell Studio XPS 9100 computer with Windows 7 Prof installed. The computer has two physical hard drives that came with the computer. The seccond physical hard drive was not partition or formatted when I received the computer. I divided the second physical HD into three partitions, Page File (D), Image Backup (E), and Data Backup (F). The first physical HD had the following volumes when it came from Dell: OEM partition (39 mb), Recovery partition (10.8 gb), and OS (C) (71 gb)When using Disk Management, normally I would see the HD designation of Disk 0 for the OEM partition, Recovery partition and OS (C) partitions This morning after booting up the computer and looking at Disk Management, I am now seeing the volumes for Disk 0, Page File (D), Image Backup (E), and Data Backup (F). For Disk 1, I am now seeing OEM partition, Recovery partition, and OS (C) partitions.Is it possible for physcial hard drive designations to change and still have the computer operate normally?
View 6 Replies View RelatedI'm trying to create a new simple volume in 130 GB free disk space. There's no obvious reason why it would refuse to do so - I'm not at the hard limit on number of partitions or anything - but disk management MSC is consistently returning "Not enough space" errors. The only thing I can think of is something to do with the partition order, but if so I have no idea how to fix it non-destructively. I'm in the middle of backups on it, so deleting partitions is a no-go. At the moment I don't understand what's going on.
DISKPART output (Win 7 x64):
Code: DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 134 GB
[code].....
So I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View RelatedI used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
View 2 Replies View RelatedI've worked on many before and as you know most of the time you can force a drive to spinup and cough up at least sOME data.... every now and then I get a harder case.
dealing with this caused a question in my mind:
I have the bad drive [PATA notebook drive -seagate momentus] attached to a usb bridge device that I use for all such issues. in this case, when I do a fresh start, with the external bridge powered up before cold boot, once 7 Ultimate gets coherent I run disk Management - the scan will popup the box saying "this disk needs to be initialized" and I give it the go - it gives "device not ready".that does not surprise me since the drive seems to only spin [motor runs] sporadically.
What I'd like to know is: what is the applet "seeing" - what is it in disk management that recognizes there is something akin to a Disk out there on one of the device ports?the followon question would then be: what low-level tool can I use that can attempt communication with the drive's firmware to try to get a spinup command or something to give me a chance???
I have seen an old macintosh drive - WD if I recall - that was in similar state. sometimes I could get a read via the usb bridge, but no data. finally after days of trying I gradually was able to start reading - it would spin very slowly and erratically, taking literally days to complete the forensic tool's scan....
Computer on my work bench that I use to look up answers on google and download drivers or other software for customers computers that im fixing. I also have an IDE and SATA to USb adaptor to hook up a hard drive to the computer. I use this to run disk checks on the drive or to backup data. This computer has Win XP for years, but it started having more and more random issues so I decided to wipe it and install win 7. ever since doing this I'm running into a problem form time to time.
View 9 Replies View RelatedI searched the forum and had seen a similar thread , but lost track of it and so i decided to post a new thread.My problem is this-My Laptop hard disk of 500gb shows missing in the Local Disk Management & the status indicates FAILED.It so happened that by mistake I formatted a drive (H: ) using a program WintoFlash. & the problem was i had ran the program from the H: drive itself. So i ended up formatting the H:half way & the laptop restarted. Since then it didnt load the OS.I finally decided to remove the hard disk from the laptop & hook it to a spare computer which i already have . (500gb & Windows 7 installed)I checked My Computer & the drives didnt show up. So i checked the Local Disk Management & found a cross mark on my hard disk. & it showed missing. & status as Failed.his is how it looks:Shot at 2012-09-19Is there anyway i can get my data back?
View 7 Replies View RelatedThough there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
View 1 Replies View RelatedWindows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
View 2 Replies View RelatedI had Windows 7 Prof. 32 Bit version installed on C. I had two more volumes D and E.So i needed one more volume therefore i shrinked the D and took 16 GB from it and made it new volume as NTFS formatted drive M. When doing it windows showed some warning that "you wont be able to boot except from your current installation" I cant remember exactly.After that the colour changed from blue to geenish yellow.When i restarted the windows logo started and the system crashes and BSOD with STOP Error : 0x0000007b (0x80786B58, 0xC000034, 0X0000000, 0X0000000)I ran diskpart Here are the results:My all 4 partition had become dynamic and i think this is the reason that windows wont boot.
View 1 Replies View RelatedNo error message, just endless stall. Virtual Disk Service is on. Have no idea what problem is or what to do.
View 2 Replies View Related
