Make Partition In Windows 7 Other Than Using Disk Management?
Jan 19, 2013
Though there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
View 1 Replies
ADVERTISEMENT
May 26, 2012
In my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
View 5 Replies
View Related
May 27, 2011
Recently I installed ubuntu 11.04. Now I have deleted the ubuntu partition using windows disk management. Now I can't boot the windows os! Even I tried the FIXMBR commands! Now it is showing 'BOOTMGR not found".
View 9 Replies
View Related
Jul 30, 2012
In the Disk Management, I have an extra 0 MB GPT Protective Partition. Is that normal?
View 4 Replies
View Related
Mar 17, 2011
I installed partition magic to format a external HDD with the FS FAT32 since ps3 supports only FAT32 but to my dismay D: where I have all my data does not show up on explorer it shows up in disk management with the size of the disk 115.7 GB unable to explore add or change drive letter PS help..I installed recover partition and all the files shows up but I dont have an option to recover...
View 6 Replies
View Related
Jun 3, 2011
How to force format a flash drive? I have an 8gb flash drive and I plugged it in to a speaker that plays mp3 songs. But after unplugged it, my flash drive prompts "Please insert disk" and 0mb in my computer. I tried to view it with disk management and I saw its partition type was RAW.
View 6 Replies
View Related
Feb 2, 2012
I have a 1TB hard drive partitions into a C drive and D drive. The operating system is Windows 7 64 bit. The C drive is my every day stuff, and I use D to store media, music, video etc. Today I wanted to access the D drive and it was not there. The C drive is listed as usual. I went to Disk Management and the missing D drive was not there as well. I don't know if this explains things, but I ran a partition analysis program and it showed 500 gigs as unallocated. But that space is also not noted in disk management. Right now I am running partition recovery software to see if the files are somewhere, but it will take a few hours.
View 2 Replies
View Related
Feb 15, 2013
No install disks, no manual just letter telling me to protect customer data entire drive was wiped clean including Recovery partition. Checked disk management it shows all 4 primary partitions used: 200mb (boot), 169gb (C drive), 281gb (D drive), 16.5gb Recovery partition. I tried F9 when booting (nothing) just boots into OS. This setup is completely useless to me. Called Asus ($50.) for install disk they said call Microsoft, call Microsoft ($99. new disk) they said call Asus, I've already paid for Win 7 once and i'll be damned if I pay for it again. Typical corporation bullshit.What I want to do is install Win 7 on 1st part, 2nd (shared NTFS part), Ubuntu on logical partitions.
View 5 Replies
View Related
May 18, 2010
Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
View 1 Replies
View Related
Jun 26, 2010
After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1.Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives D and E are connected to SATA port 2 and 3 but are listed before the one connected in SATA port 1. And since the computer seems to work fine, I'm wondering if the disk numbers listed in Disk Management matter at all?
View 9 Replies
View Related
Nov 14, 2010
My data hard drive is seen in disk management but does not show in windows explorer.I am using windows seven 64 bits.In disk management the drive shows: Layout: simple, type: basic, file system: NTFS, status: healthy(system-active-primary partition) How can I retrieve my data?
View 8 Replies
View Related
Aug 14, 2012
Windows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
View 2 Replies
View Related
Jul 7, 2012
I had Windows 7 Prof. 32 Bit version installed on C. I had two more volumes D and E.So i needed one more volume therefore i shrinked the D and took 16 GB from it and made it new volume as NTFS formatted drive M. When doing it windows showed some warning that "you wont be able to boot except from your current installation" I cant remember exactly.After that the colour changed from blue to geenish yellow.When i restarted the windows logo started and the system crashes and BSOD with STOP Error : 0x0000007b (0x80786B58, 0xC000034, 0X0000000, 0X0000000)I ran diskpart Here are the results:My all 4 partition had become dynamic and i think this is the reason that windows wont boot.
View 1 Replies
View Related
Jul 11, 2012
I have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive.Will it make difference to make a partition at the beginning or at the end of this drive when it comes to gaming performance?My cousin showed me one game in the same drive installed in the 1st of four partitions of a 500gb 7200rpm (the same i have) performing with 3-5 fps more than that game installed in the 4th partition of that same drive....
View 9 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
Jul 27, 2011
While running Computer Management as Administrator, I have a USB disk that is split into two partitions. One is healthy and active (NTFS) and the other is unallocated. When I right click on the active disk, I should be seeing an option to expand this drive to take over the unallocated space, should I not? It is a basic disk, not dynamic, but I thought that even basic disks have this ability. I am able to see this option when I right click on dynamic disks...
View 10 Replies
View Related
Jul 18, 2012
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
View 2 Replies
View Related
Dec 10, 2012
I want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
View 3 Replies
View Related
Jun 25, 2011
I've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
View 3 Replies
View Related
Apr 7, 2012
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
View 19 Replies
View Related
Jan 11, 2011
I have a Dell Studio XPS 9100 computer with Windows 7 Prof installed. The computer has two physical hard drives that came with the computer. The seccond physical hard drive was not partition or formatted when I received the computer. I divided the second physical HD into three partitions, Page File (D), Image Backup (E), and Data Backup (F). The first physical HD had the following volumes when it came from Dell: OEM partition (39 mb), Recovery partition (10.8 gb), and OS (C) (71 gb)When using Disk Management, normally I would see the HD designation of Disk 0 for the OEM partition, Recovery partition and OS (C) partitions This morning after booting up the computer and looking at Disk Management, I am now seeing the volumes for Disk 0, Page File (D), Image Backup (E), and Data Backup (F). For Disk 1, I am now seeing OEM partition, Recovery partition, and OS (C) partitions.Is it possible for physcial hard drive designations to change and still have the computer operate normally?
View 6 Replies
View Related
Sep 22, 2011
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies
View Related
Feb 8, 2012
I'm trying to create a new simple volume in 130 GB free disk space. There's no obvious reason why it would refuse to do so - I'm not at the hard limit on number of partitions or anything - but disk management MSC is consistently returning "Not enough space" errors. The only thing I can think of is something to do with the partition order, but if so I have no idea how to fix it non-destructively. I'm in the middle of backups on it, so deleting partitions is a no-go. At the moment I don't understand what's going on.
DISKPART output (Win 7 x64):
Code: DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 134 GB
[code].....
View 1 Replies
View Related
Nov 20, 2011
I needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
View 5 Replies
View Related
Dec 10, 2011
So I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies
View Related
Apr 22, 2012
I used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
View 2 Replies
View Related
Dec 8, 2012
I've worked on many before and as you know most of the time you can force a drive to spinup and cough up at least sOME data.... every now and then I get a harder case.
dealing with this caused a question in my mind:
I have the bad drive [PATA notebook drive -seagate momentus] attached to a usb bridge device that I use for all such issues. in this case, when I do a fresh start, with the external bridge powered up before cold boot, once 7 Ultimate gets coherent I run disk Management - the scan will popup the box saying "this disk needs to be initialized" and I give it the go - it gives "device not ready".that does not surprise me since the drive seems to only spin [motor runs] sporadically.
What I'd like to know is: what is the applet "seeing" - what is it in disk management that recognizes there is something akin to a Disk out there on one of the device ports?the followon question would then be: what low-level tool can I use that can attempt communication with the drive's firmware to try to get a spinup command or something to give me a chance???
I have seen an old macintosh drive - WD if I recall - that was in similar state. sometimes I could get a read via the usb bridge, but no data. finally after days of trying I gradually was able to start reading - it would spin very slowly and erratically, taking literally days to complete the forensic tool's scan....
View 1 Replies
View Related
Mar 13, 2011
Windows 7 my computer shows disks my two partitions device manager and disk management do not show my hard drive
View 3 Replies
View Related
Jun 14, 2011
Computer on my work bench that I use to look up answers on google and download drivers or other software for customers computers that im fixing. I also have an IDE and SATA to USb adaptor to hook up a hard drive to the computer. I use this to run disk checks on the drive or to backup data. This computer has Win XP for years, but it started having more and more random issues so I decided to wipe it and install win 7. ever since doing this I'm running into a problem form time to time.
View 9 Replies
View Related
Sep 19, 2012
I searched the forum and had seen a similar thread , but lost track of it and so i decided to post a new thread.My problem is this-My Laptop hard disk of 500gb shows missing in the Local Disk Management & the status indicates FAILED.It so happened that by mistake I formatted a drive (H: ) using a program WintoFlash. & the problem was i had ran the program from the H: drive itself. So i ended up formatting the H:half way & the laptop restarted. Since then it didnt load the OS.I finally decided to remove the hard disk from the laptop & hook it to a spare computer which i already have . (500gb & Windows 7 installed)I checked My Computer & the drives didnt show up. So i checked the Local Disk Management & found a cross mark on my hard disk. & it showed missing. & status as Failed.his is how it looks:Shot at 2012-09-19Is there anyway i can get my data back?
View 7 Replies
View Related
Jan 25, 2012
No error message, just endless stall. Virtual Disk Service is on. Have no idea what problem is or what to do.
View 2 Replies
View Related