How to force format a flash drive? I have an 8gb flash drive and I plugged it in to a speaker that plays mp3 songs. But after unplugged it, my flash drive prompts "Please insert disk" and 0mb in my computer. I tried to view it with disk management and I saw its partition type was RAW.
View 6 RepliesI installed partition magic to format a external HDD with the FS FAT32 since ps3 supports only FAT32 but to my dismay D: where I have all my data does not show up on explorer it shows up in disk management with the size of the disk 115.7 GB unable to explore add or change drive letter PS help..I installed recover partition and all the files shows up but I dont have an option to recover...
View 6 Replies View RelatedIn my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
So I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View RelatedComputer on my work bench that I use to look up answers on google and download drivers or other software for customers computers that im fixing. I also have an IDE and SATA to USb adaptor to hook up a hard drive to the computer. I use this to run disk checks on the drive or to backup data. This computer has Win XP for years, but it started having more and more random issues so I decided to wipe it and install win 7. ever since doing this I'm running into a problem form time to time.
View 9 Replies View RelatedIn the Disk Management, I have an extra 0 MB GPT Protective Partition. Is that normal?
View 4 Replies View RelatedThough there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
View 1 Replies View RelatedI know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I have a 1TB hard drive partitions into a C drive and D drive. The operating system is Windows 7 64 bit. The C drive is my every day stuff, and I use D to store media, music, video etc. Today I wanted to access the D drive and it was not there. The C drive is listed as usual. I went to Disk Management and the missing D drive was not there as well. I don't know if this explains things, but I ran a partition analysis program and it showed 500 gigs as unallocated. But that space is also not noted in disk management. Right now I am running partition recovery software to see if the files are somewhere, but it will take a few hours.
View 2 Replies View RelatedRecently I installed ubuntu 11.04. Now I have deleted the ubuntu partition using windows disk management. Now I can't boot the windows os! Even I tried the FIXMBR commands! Now it is showing 'BOOTMGR not found".
View 9 Replies View RelatedSo it was working fine, i turned off my computer and went to bed, when turned it on the next morning the drive was no longer showing up so i checked disc management and it was in there as unallocated, the only options that are there when i right click are:Im running Windows 7 ultimate x86 (32bit) on PC and the External Hard Drive is a Western Digital 1TB Model WD 070A USB device.
View 4 Replies View RelatedSo it was working fine until one of the latest windows auto update, i turned off my computer and went to bed, when turned it on the next morning the drive was no longer showing up so i checked disc management and it was in there as unallocated, the only options that are there when i right click are: Offline, Properties and help.Im running Windows 7 ultimate x64 on a sony vaio VPCL118FG and the External Hard Drive is a Western Digital 2TB Model WDBAAU0020HBK?
View 9 Replies View RelatedMy backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
View 19 Replies View Relatedi bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies View RelatedI needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
View 5 Replies View RelatedWindows 7 my computer shows disks my two partitions device manager and disk management do not show my hard drive
View 3 Replies View RelatedI used Gparted to shrink the windows partition and create other partitions for a dual boot. Windows seems to be find except that disk manager does not reflect the changes, and defragmenter will not work at all?
View 3 Replies View RelatedThere was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
View 3 Replies View RelatedI'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies View RelatedI have an external HDD that works on any other machine I test it on, except mine. It was working and for some reason I recently needed to use it and it didn't work. It appears in device manager but not in disk management. A drive letter might not be assigned to it, I can't see it in disk management to assign a drive letter to it.
View 7 Replies View RelatedMy C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
View 9 Replies View RelatedI use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
Is there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
View 1 Replies View RelatedI recently installed Ubuntu and my Windows 7 partition converted itself to SFS. I want to know if/how I can use the recovery ISO in a USB flash drive so get my partition back?
View 2 Replies View RelatedAs some of you may know i encountered the infamous "BOOTMGR MISSING" error which i could find no fix for and decided to do a fresh install of the OS.
Now at the Windows 7 Installation i selected the language and then selected Custom install and get a page asking which hard drive partition i would like to install the OS on. Now here is where somethings wrong. The only thing listed is the 100mb System reserved partition. How do i get the other partitions listed.
I currently have a disc copy of windows 7 and I am currently running it as my main OS as well. I was wondering just in case my computer decides to have a few issues is there anyway I can make a data partition to store windows 7 or put it on a flash drive so that in the incident of a hardware failure I would be able to go into my bios and boot the recovery partition or boot it from a flash drive allowing me to reinstall the OS.
View 3 Replies View RelatedI have a disk with MS Office 2003 on it. My CD/DVD tray is not working right now. I was thinking I might be able to copy the disk to a flash drive and load it that way. Is that possible? How would I do it if it is?
View 1 Replies View RelatedI have bit of a trouble with installing Windows 7 on my new ASUS X501A freedos laptop. Since the laptop has no disk drive I am installing Windows via USB device.
Everything goes smooth with the installation until it reaches the second step, asking for a cd/dvd/flash driver, not recognizing the USB device that is plugged in.
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
The other night I was putting something on my 8gb sandisk flash drive. My pc shut off randomly and I go to recopy the files onto my flash drive and the drive keeps saying the disk is write protected. I cant format the drive because it says the disk is write protected. I've tried going into regedit and making the write protect reg key. Didn't work. The flash drive does not have a little switch to make it protected.
View 2 Replies View Related