i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 RepliesWhen I select unallocated space in disk management All I get is "New Simple Volume" option. How do I create an extended partition and then logicals on it? I can do this ever so easily in gparted and may resort to that but a bit infuriated at how clunky this seems in disk management.
View 1 Replies View RelatedWindows 7 my computer shows disks my two partitions device manager and disk management do not show my hard drive
View 3 Replies View RelatedThere was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
View 3 Replies View RelatedI'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies View RelatedI use a lot of different usb hard drives in my shop. I have two basic enclosures, a generic one that uses pata drives on a usb 2.0 cable and an Apricon USB SATA 2.0 adapter.Suddenly when I plug in a new drive device manager does see the drive and installs it in device manager. I can see the drive in Disk Management but it has no drive letter assigned, and therefore doesn't show up in Computer. I can easily just assign a letter in Disk Management and the drive immediately becomes usable. However, I would like to get Windows 7 to resume automatically assigning a drive letter.
I have tried a program called USB DriveCleanup. What it appears to have done is remove all installations of prior USB drives and when I plug in a drive that has been in the machine previously it then goes thru the install again. Yet still no drive letter. I think the program is doing what would manually be done by going into safe mode and cleaning out all the entries that build up there that don't appear in normal mode, then removes them. Basically it seems like a shortcut to manually doing it.
I also tried a registry fix that essentially asked me to delete the upper and lower filters. This seems similiar to fix for CD/DVD drives that no longer appear in Computer. This fix also didn't work.I tried removing and reinstalling the chipset drivers. Still no go.Running Windows 7 Pro SP1, H55 chipset.
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
View 9 Replies View Relatedi am using Windows 7 64-bit,320gb hard disk.i want to use ubuntu for programming nd create an unallocated partition.so,how can i do that?
View 3 Replies View RelatedBefor two days i purchased a Sony E series core i5 Laptop with 500GB HDD Space & Original windows 7 Home basic. I wantd 4 partitions , but they said only two partions can be done in Sony laptops then they divided the HDD in to two drives. Nw C drive shows 254GB & D drive shows 195 GB space respectively. bt my system seems slow nw. Can i divide my C drive in to two drives with 125 GB space each without losing my OS & installed softwares??Before dividing do i need to take a backup of C drive?? how can i split ma existing C drive in to two drives ? How can i take backup?
View 4 Replies View RelatedHow to partition my 250gb hard drive into 3 volumes on windows 7?
View 7 Replies View Relatedi have a question about partitioning a 2TB external hard drive that is formatted for 1.8 TB, i would like to partiotion it into (2) 500G partitions and whats ever is left as another partition, i dont remember how to go about doing it, if i think i remember correctly, i have to delete the partiotion first ( there is not data on it at the moment ) then partition the drive as stated above, i will be using partition home wizard 6.0, also, cant i just "resize the 1.8TB drive to what i want ?. or is it better to delete it and re partion the drive
View 1 Replies View RelatedI have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
View 1 Replies View RelatedI have completely formatted my hard disk with seagate seatool. Then I have installed windows xp sp3. I have made 4 partitions at that time i.e. c,d,e,f. After that I have installed windows 7 now I can't see my hdd in disk management or in device manager. Both device manager & disk management are showing me my external drives like pen drive.
View 9 Replies View RelatedI just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
View 6 Replies View RelatedMy backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
View 19 Replies View RelatedI needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
View 5 Replies View RelatedIn my Sister's laptop, running Windows 7 Ultimate x86, all of a sudden, while she was working on the computer, the "E drive" went missing which was a partition on the hard disk (I don't remember if it was a logical or primary partition). She tried restarting the system but to no avail. So, I told her to open the "Disk management" tool in Windows 7 to see if the partition is visible in there. I did this because sometimes, in my computer, my expansion drive wouldn't show but it would be visible in the disk management tool and all I had to do was to re-assign it a drive letter. But, in this case, it wasn't visible over there.
So, now I told her to download "Mini-Tool Partition manager Home edition" and install it on her laptop. On running it, it wouldn't show the partition either. It would just show "C:", "D", "System Reserved" and unallocated space. However, when I added up the size displayed by C:, D:, System Reserved and Unallocated, it doesn't add up to the actual hard disk size. It means the partition is somewhere there but not visible. Is it possible that the partition would show up correctly if the laptop is booted into the bootable image of Mini-Tool Partition Manager?
How to force format a flash drive? I have an 8gb flash drive and I plugged it in to a speaker that plays mp3 songs. But after unplugged it, my flash drive prompts "Please insert disk" and 0mb in my computer. I tried to view it with disk management and I saw its partition type was RAW.
View 6 Replies View RelatedI have an external HDD that works on any other machine I test it on, except mine. It was working and for some reason I recently needed to use it and it didn't work. It appears in device manager but not in disk management. A drive letter might not be assigned to it, I can't see it in disk management to assign a drive letter to it.
View 7 Replies View RelatedI have windows 7 ultimate installed on my dell Inspiron N5010 machine.I had a preinstalled windows 7 home basic.I have currently 4 partitions:OEMRecovery 1 Primary partition with aorund 250 GB1 extended partition with 2 logical drives.Whats My Problem??Out of the free 225 GB , the maximum available shrinked space available is 128 gb (thats is understable ,due to unmovable files ~hibernation files etc).I shrinked it to maximum capacity to create a new unallocated space of 128 gb.But when I tried to create a simple volume, it gave me an error~You cannot create a new volume in this unallocated partition beacause the disk has already maximum number of partitions.I guess,out of the permissible 4 partitions in disk management without using any 3rd party software,I have used it all.And when I tried to create a new simple volume, it is creating another partition.Real Problem:How to create a logical drive from primary partition??PS:I tried PM, but it gave me a launch error.
View 5 Replies View RelatedI used to have only 1 partition to do everything with. I'm reinstalling windows 7, and I would like to take this chance to partition my drives the correct way to help the computer run faster and waste less memory. I browsed through multiple articles on disk partitioning but I just can't grasp the idea. I'm not too good with computers. Would any be kind enough to explain/teach me how to correctly and efficiently partition my disk?
View 17 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedIts a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1.Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives D and E are connected to SATA port 2 and 3 but are listed before the one connected in SATA port 1. And since the computer seems to work fine, I'm wondering if the disk numbers listed in Disk Management matter at all?
View 9 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedWhen I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".
View 1 Replies View RelatedLast night I noticed it had turned the bar to red, and said I had only 12 GB left of 135 GB. Im not into video, music, games or anything else I know of that would use that much space. I surf the web, and keep some scanned and some text documents. A few months ago I carefully installed Windows 7, instead of Vista which my PC came with. No problems. I just now deleted the old Windows stuff, and that freed up 47 GB, so thats good. I suspect that my hard drive was partitioned during that installation of Windows 7, and I dont know that that is necessary. Can that be undone?
View 5 Replies View RelatedI have an enclosure with my hard drive in it and connected it to the computer it was not found and i think its because its disabled i go to computer manage disk managemtent and recovery disk,i click properties click on my hard drive (toshiba...) click enable, then i click next and it says windows was not able to enable the hard drive
View 1 Replies View RelatedI cant access my hard disk drive, when im trying to open it, my laptop responses that that there is no permission from administrator, there is a logo on my hard disk drive that the hard disk is shared..
View 2 Replies View RelatedMy Drive E just lost from my computer! I don't know how did it happen. I try to search through google but I can't find a solution.
View 9 Replies View Related